Most accurate Nebulon B 3D print files?

[StevenBills]

Does anyone know of the most accurate Nebulon B STL files out there?

Here is the one from Gambody: Nebulon-B Frigate 3D Printing Model | Assembly

And here is one from BigBangCollectibles: https://www.etsy.com/listing/1342598272/ef-76-nebulon-b-escort-frigate-stl-files

Are there any others out there that I'm not aware of? Any help would be greatly appreciated!

SB

 

[corranhornjje]

Not sure on the accuracy, but free. I really like the look of the 2 you posted. Gambody are great modelers.

Nebulon B Frigate (Cut and Sectioned) by KupipiKuki

--Please look forward to a second version in the next few months--This is a model from the author Daniel at Sketchfab, I have taken the model and scaled it up to be around 1:270 similar to the X-Wing game (It is approximately 1.111 meters once assembled). The pieces are cut into smaller...

www.thingiverse.com

Nebulon-B Frigate by DavidBogaerts

Nice detailed modelI took he complete model and sliced it in 4 pieces for easier printing.Also seperated the antenna-arrays, the back tower, and the 2 wings.Printed model in 2x size

www.thingiverse.com

Nebulon-B Hull Panels by TK42Fun

These panels were designed using the original Nebulon-B Table Top Scale model from thingiverse.These panels will not only help you add some quick detail to your print, without cramping your hands as you cut out individual panels, but also hide many of the seperation lines in the model itself.The...

www.thingiverse.com

Nebulon B Frigate, Tabletop Scale by Snickett

Nebulon B Frigate sized for a length of 20 inches. Sections are divided into chunks sized at approximately 4.5 inches. Center spar has a 1/2 hole running lengthwise for the inclusion of a dowel rod for extra strength.

www.thingiverse.com

Smaller scale for tabletop - Nebulon-B Frigate by DeltaXF

 

[skahtul]

I hope the Gambody files win, I am more than half way into a 150% scaled up print of that one

 

[skahtul]

It's been a very long time (2020) but back then I reached out to the producer of this one. I don't remember if I reached out directly to him or JPG Productions. At the time the files were for sale, I never pulled the trigger as they were pretty expensive and at the time, I had just entered into the 3D printing world.

1/500 EF-76 Nebulon B Escort Frigate

Visit the post for more.

cosmosmodels.wordpress.com

 

[StevenBills]

I hope the Gambody files win, I am more than half way into a 150% scaled up print of that one

View attachment 1840845

Ahh that's funny! What a coincidence! Are you printing it on your Prusa? Is there provisions to add a strengthening tube down the length of the ship? I guess you could make one with your slicer...

SB

 

[skahtul]

Ahh that's funny! What a coincidence! Are you printing it on your Prusa? Is there provisions to add a strengthening tube down the length of the ship? I guess you could make one with your slicer...

SB

Yes, room for a tube for sure which is nice. I will be running a metal rod all the way down it and connecting it to a custom wall mount.

Too much for the Mini This is being printed on my Neptune 4 pro and 3 Plus printers.