Lawgiver Mk II Build - Fully functional with Gas Blow Back Pistol

[striker01]

Sharing to anyone who is interested in my Lawgiver Mk II build using a Glock 18C GBB pistol from WE Airsoft.
The materials needed are as follows :

Glock 18C GBB Pistol
GI sheets about 0.6mm thick
Plastic signboards about 3mm thickness
PVC pipe 1 inch diameter by 5inch length
Electrical wires
Penlight with LED and Laser (batteries included)
Filler
20pcs Various length of 3mm flat head screws with nut
Clear acrylic for mag side cover
Metal brackets
Metal washers - 2pcs for the Rear Assembly
Plastic buttons and comb ribs for the Rear Assembly
LED lights (Red and Green) for the Display Indicator

Hope I got them all....

[/URL][/IMG]

[/URL][/IMG]

 

[striker01]

You can purchase the GBB Pistol from your Airsoft shop or check out their website below.

http://www.wemodel.com.tw/EN/ugC_Sh...idShowKindID=4&hidShowTypeID=23&hidShowID=213


Then download the template of LG2 from FB of Dredd Custume Group as below. Thanks to Baron Von Blonde for sharing his files.

https://www.facebook.com/groups/DreddCostumeGroup.DragonCon2013/638722362862676/

 

[striker01]

Next step is to remove the rear sight and replace with a modified rear sight to support the rear assembly of LG2 for slide action.
The grip assembly is installed to support the LG2 top slide and rear sight.

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

 

[striker01]

Then build the magazine and magazine support as per below using the GI sheet and plastic sign boards cut as per template.
Install also metal brackets to be used as support to the pistol rail and top slide assembly.

Magazine support assembly

[/URL][/IMG]

[/URL][/IMG]

Magazine brackets for pistol rail support and top slide support

[/URL][/IMG]

[/URL][/IMG]

 

[striker01]

Install and screw magazine support to pistols rail and LG2 rear assembly to modified rear sight.

Installation of magazine support to pistol rail. Material made of GI sheet with 2 holes in 3mm dia in the bottom and 3mm flat head screw

[/URL][/IMG]


Install LG2 rear assembly to modified rear sight
Material used includes :
GI sheet
Metal washer with Plastic button on top
Plastic comb ribs cut as slide serrations
Plastic sign board cue based on template as slide for the serrations and buttons

[/URL][/IMG]

Install LG2 rear assembly to rear sight using a metal bracket for support

[/URL][/IMG]

 

[striker01]

Next build will be the front magazine.

Materials used are:
Resin cast of 9mm rounds (6pcs per column or 12 rounds)
GI sheet for the magazine body
Plastic sign boards cut based on the patterns
screw with washer in 3mm for the magazine release (upper back of the mag)
filler applied to gaps
flat black paint for the mag and bronze paint for the 9mm rounds

[/URL][/IMG]

Install front magazine to LG2 front assembly

[/URL][/IMG]

 

[striker01]

Display and laser are modifications from a cheap pocket LED flashlight.
- LED flashlight with laser option (2 switches)

[/URL][/IMG]

[/URL][/IMG]

The LED flashlight was used as backlight for the display.
The laser is installed to a resin moulded enclosure
Use the original switches and attached wires to make assembly fit on its respective locations
Cut the battery housing to fit into the front magazine

[/URL][/IMG]

Laser inside the resin enclosure

[/URL][/IMG]

LED lights installed inside the display as backlight

[/URL][/IMG]

 

[Uridium]

Great work.... Looks awesome in the vid!!!!

 

[vintageslant]

Great looking project. Your pictures and descriptions are more accurate than real weapon manuals lol.

 

[baron von blondle]

really awesome stuff!