Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ more)

Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

I actually had my legs set up the same way as you, with hinges and it looked very similar.... I went to try it on and either I had to shave my leg down a half inch or so, or the hinges had to go... It was a great idea and it made me smile seeing that it is working for someone else. I had to use plan B. Good luck with the build! :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam, Body work, paint option,Leg hin

Mockle said:
attempted to place the camera in the chin and just could not do it.... So the new helmet is on ordered which will be 1000% better its going to have all the horns and whistles :). and have a new camera ordered just a all new set up really...

[url]http://imageshack.us/scaled/large/593/gks3.jpg[/URL]
Click to expand...
What was the problem ? I successfully installed one, bigger than yours in my previous helmet, maybe I can help ! Unfortunately the helmet in question exploded in pieces on the floor months ago, so I don't have it anymore, but I already replaced by a MK42 one, with the same setup. Not installed yet though, it's been sitting on my desk for a while. I understand you are using the same setup than me, with video glasses ?
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

Checked the entire thread twice now and couldn't find the link for the lens and camera.

Your updates make me jealous of your tech. Great work as always!
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

tk527 said:
I actually had my legs set up the same way as you, with hinges and it looked very similar.... I went to try it on and either I had to shave my leg down a half inch or so, or the hinges had to go... It was a great idea and it made me smile seeing that it is working for someone else. I had to use plan B. Good luck with the build! :)
Click to expand...

you should show your work we can learn from each other not even saying mine is going to work:) but I will try to make it work..... thanks I I will see soon..:D


teragon said:
What was the problem ? I successfully installed one, bigger than yours in my previous helmet, maybe I can help ! Unfortunately the helmet in question exploded in pieces on the floor months ago, so I don't have it anymore, but I already replaced by a MK42 one, with the same setup. Not installed yet though, it's been sitting on my desk for a while. I understand you are using the same setup than me, with video glasses ?
Click to expand...

No problems really just didn't like a hole in the chin so I will be doing the upper vent area the glasses is still a go I love that setup I just want to do a better build If I had a 3D printer it would be on lol... the more help the better please tune it any time.. to bad the other helmet shattered love to of seen that please post a build be nice to see other work...:)

quovadis0920 said:
Checked the entire thread twice now and couldn't find the link for the lens and camera.
Your updates make me jealous of your tech. Great work as always!
Click to expand...
cant post link on here for that , But be happy to set you in the right direction if you want to PM me... have the one Im letting go look in JY :)

thank you everyone, :D
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

So here you can see the style difference and size now :)

 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

Ah yes, I get what you mean, the hole in the chin was not very pretty in my MK 4 helmet neither, but couldn't fit the camera in the top vent. Still can't, but fortunately the MK42 has a slit in the chin that hides the camera well enough. I'll open my thread later, but in the mean time I'm following yours closely, you're doing some awesome work here !
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

teragon said:
Ah yes, I get what you mean, the hole in the chin was not very pretty in my MK 4 helmet neither, but couldn't fit the camera in the top vent. Still can't, but fortunately the MK42 has a slit in the chin that hides the camera well enough. I'll open my thread later, but in the mean time I'm following yours closely, you're doing some awesome work here !
Click to expand...

top vent should set this camera in just fine... thanks jump in any time :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

Mockle said:
top vent should set this camera in just fine... thanks jump in any time :)
Click to expand...

Wont work on the top vent in my helm, as the thickness of the roof of the helmet comes down past the vent. The vent area is pretty much solid as it is part of the roof of the helmet and there is no empty space behind it . It should work in the chin area fine, lots of room in there. Just drill out the chin bolt and set it in behind. Depending on the angle your helm sits on your head it may be hard to see though as you will probably be viewing the floor. I was thinking about installing the camera in the front of the neck piece just above the chest plate. Sure it is a bit of a lower view but as long as you can see where you are going :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

Hello Mockle, I absolutely admire your work.. And Thank you for sharing so much knowledge to us beginners.. may I ask, what is the white stuff you use? Looks different from body filler (maybe sheetrock) I'm guessing? But I may be wrong hehe! Really interested how you got those super clean everythings, thanks lots, have a great day and keep up your awesome build! Subscribed definitely!:thumbsup
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

This build is sheer awesome!!! Just an idea about the camera... could you mount it in the eye? hear me out - if you set it back a little in the eye the surrounding lights from the eye would hide the fact that there is a camera lens there. You would only need a couple mm clear hole for the camera to view through. I'm not sure what effect the lights would have on the camera itself but it might solve the issue of having a hole somewhere in your helmet plus it's in a prime position to see from. Just a thought though :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

Surreal Studios said:
Wont work on the top vent in my helm, as the thickness of the roof of the helmet comes down past the vent. The vent area is pretty much solid as it is part of the roof of the helmet and there is no empty space behind it . It should work in the chin area fine, lots of room in there. Just drill out the chin bolt and set it in behind. Depending on the angle your helm sits on your head it may be hard to see though as you will probably be viewing the floor. I was thinking about installing the camera in the front of the neck piece just above the chest plate. Sure it is a bit of a lower view but as long as you can see where you are going :)
Click to expand...

Going to give it my best :) see how goes Thanks Matt

typewriter said:
Hello Mockle, I absolutely admire your work.. And Thank you for sharing so much knowledge to us beginners.. may I ask, what is the white stuff you use? Looks different from body filler (maybe sheetrock) I'm guessing? But I may be wrong hehe! Really interested how you got those super clean everythings, thanks lots, have a great day and keep up your awesome build! Subscribed definitely!:thumbsup
Click to expand...

Thank you very Much... I try I was one asking at one time trust me I had doors slammed in my face... So why not so what white stuff I use so much :D

InCOGnito B2TE said:
This build is sheer awesome!!! Just an idea about the camera... could you mount it in the eye? hear me out - if you set it back a little in the eye the surrounding lights from the eye would hide the fact that there is a camera lens there. You would only need a couple mm clear hole for the camera to view through. I'm not sure what effect the lights would have on the camera itself but it might solve the issue of having a hole somewhere in your helmet plus it's in a prime position to see from. Just a thought though :)
Click to expand...

Good Idea I will make this work I promise :D and Thank you... wait till you see what I have in stored for the back fins :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

hey just would like to say this is amazing im blown away by the workman ship on here :) and i love the thought you go in to on the mechanics :)
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

So I have some shoulder supports I will be adding to the front chest to give support and so it wont be moving all around...



 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

i look forward to your updates there amazing :) great work
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

typewriter said:
may I ask, what is the white stuff you use? Looks different from body filler (maybe sheetrock) I'm guessing? But I may be wrong hehe!
Click to expand...

Its body filler :D
 
Re: Ironman MK III Suit BUILD *WIP *(camera, Unibeam,Leg hinge,air system,smoke,+ mor

So order allot of things to be adding to the suit.... Should be fun stay tuned :D
 
You must log in or register to reply here.

Similar threads

paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
1
Views
587
renaissance_man
renaissance_man
Venom1989
IRONMAN MK 43 whole Suit 3d printed [WIP]
Replies
4
Views
3,675
Startup1dustrie
Startup1dustrie
Cbstudios
CB's Snake Plissken presidential tracker Build from Escape from New York
Replies
13
Views
562
Cbstudios
Cbstudios
paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
719
Kolin86
Kolin86
nightlyfob79
Which one is more accurate EFX PCR Mandalorian helmet or Anovos Mandalorian helmet I can only keep one
Replies
10
Views
1,125
Halliwax
Halliwax
Back
Top