Help with Hammer?

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Ryan Pritchard

New Member
Hi everybody

My girlfriend and I are working on Ramona Flowers Hammer (Scott Pilgrim Videogame version)

We are using furniture foam as the actual hammer head, and a aluminium broom handle as the hammer handle. However, we have no idea how we can secure the pole to the foam once the pole goes inside the foam block. Can anybody help? Just need a tip on how to secure it so the foam doesn't fall off or slide off

Thanks in advance :)
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

captblitzdawg

New Member
Maybe wrap the end of the pole with duct tape then coat that with superglue? Also, if you can, spray or coat the opening of the foam with plastidip. It should stay with the foam, but give the glue more surface to adhere to. And of course, keep it tight!
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top