ironmaided
Sr Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
just watched the movie twice. . .lol
just watched the movie twice. . .lol
done. . .
- Thread starter ironmaided
- Start date
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
Hey, ive been reading through the entire thread and it looks super good. I am curious as to how you get all of the details in. Is it very thin foam or is it just off-set? and also what is the thickness of your foam? If that has already been said in the forum im sorry, I must have missed it.
Hey, ive been reading through the entire thread and it looks super good. I am curious as to how you get all of the details in. Is it very thin foam or is it just off-set? and also what is the thickness of your foam? If that has already been said in the forum im sorry, I must have missed it.
MKIronMachine
New Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
Very Nice thread
Very Nice thread
Last edited:
ironmaided
Sr Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
I always have my mark 6 suit handy, i based the scale of my freehand builds (mark 42 and this heartbreaker) using the mark 6 which fits me right. .as for the details. . .i use what's on my shop, yeah scrap foams lurking around my table should suffice the details very well. . .i'm still working on the abs of this. . .
I always have my mark 6 suit handy, i based the scale of my freehand builds (mark 42 and this heartbreaker) using the mark 6 which fits me right. .as for the details. . .i use what's on my shop, yeah scrap foams lurking around my table should suffice the details very well. . .i'm still working on the abs of this. . .
Velluminous
New Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
Came across this picture, thought it might help you.
Looking forward to how yours turns out. Am (hopefully) going to be starting my own soon.
Came across this picture, thought it might help you.
Looking forward to how yours turns out. Am (hopefully) going to be starting my own soon.
quovadis0920
Sr Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
dlowrider
Well-Known Member
Re: maided's works: heartbreaker set back a little
check this, if u have patience u can get this 38117 - 1/9 Iron Man 3 - Mark XVII - Heartbreaker Armor - Action Hero Vignette check
check this, if u have patience u can get this 38117 - 1/9 Iron Man 3 - Mark XVII - Heartbreaker Armor - Action Hero Vignette check
ironmaided
Sr Member
Re: maided's works: update 04/21 iron man heartbreaker shoulders are up!
thanks guys for the heads up
i've been busy regarding my health issues and internet problems so i don't have much updates for the heartbreaker
but here's a photo of what i've been doing for a while. . .
i scrapped my first heartbreaker upper torso because of it's inaccuracy and it's kinda uncomfortable, and since balmung released the low poly 3D model of the heartbreaker as well as the other models then i think i could pull this out properly. . .
and i sold my mark 42 to a friend, so i'm building another one again for the last time. . .using jackieisrockin's mark 42 files and helagak's files which i modified a bit for accuracy. . .not rushing the suits or it might turn into scrap again just like my 1st heartbreaker chest
here's the heartbreaker low poly files modified by yours truly for foam use. . .although not ready i'll be sharing this part by part after i finished building each part for my suit. . .
check this, if u have patience u can get this 38117 - 1/9 Iron Man 3 - Mark XVII - Heartbreaker Armor - Action Hero Vignette check
http://imageshack.us/a/img259/3173/31761304.jpg
thanks guys for the heads up
i've been busy regarding my health issues and internet problems so i don't have much updates for the heartbreaker
but here's a photo of what i've been doing for a while. . .
i scrapped my first heartbreaker upper torso because of it's inaccuracy and it's kinda uncomfortable, and since balmung released the low poly 3D model of the heartbreaker as well as the other models then i think i could pull this out properly. . .
and i sold my mark 42 to a friend, so i'm building another one again for the last time. . .using jackieisrockin's mark 42 files and helagak's files which i modified a bit for accuracy. . .not rushing the suits or it might turn into scrap again just like my 1st heartbreaker chest
here's the heartbreaker low poly files modified by yours truly for foam use. . .although not ready i'll be sharing this part by part after i finished building each part for my suit. . .
ironmaided
Sr Member
Re: maided's works: update 05/13/13 new heartbreaker chest done! files comming soon!
heartbreaker abs and cod template trial
here's the shot of the back without the "mini" flaps
heartbreaker abs and cod template trial
here's the shot of the back without the "mini" flaps
Last edited:
ironmaided
Sr Member
Re: maided's works: update 05/13/13 new heartbreaker chest done! files comming soon!
i undergo physical therapy once every week to keep myself in good condition . .other problems on the other hand, i'm saving money to replace a missing package for a friend here in therpf.com so i keep my materials and resources on a limit to save some money.
UPDATE JUST NOW
front abs done. . .pretty satisfied with it and i'm excited to finish that part. . .
i undergo physical therapy once every week to keep myself in good condition . .other problems on the other hand, i'm saving money to replace a missing package for a friend here in therpf.com so i keep my materials and resources on a limit to save some money.
UPDATE JUST NOW
front abs done. . .pretty satisfied with it and i'm excited to finish that part. . .
ironmaided
Sr Member
Re: Mark 17 "heartbreaker" slow build: update 05/13/13 upper torso done! files soon!
UPDATE 05-15-13
i finally finished building the heartbreaker ab piece. . .satisfied with the result and i'll continue to build
UPDATE 05-15-13
i finally finished building the heartbreaker ab piece. . .satisfied with the result and i'll continue to build
streetsoul
Sr Member
Re: Ironman MK17 "heart breaker" FOAM build: update 05/15/13 abs done
as always bro awsome
as always bro awsome
ironmaided
Sr Member
Re: Ironman MK17 "heart breaker" FOAM build: update 05/15/13 abs done
hey i think i said that over your thread too! lol
hey i think i said that over your thread too!
lol
streetsoul
Sr Member
Re: Ironman MK17 "heart breaker" FOAM build: update 05/15/13 abs done
haha i no man still looks good cant wait to see it painted hehe are you building a helmet from scratch ? or using parachristos helmet
hey i think i said that over your thread too!
haha i no man
still looks good cant wait to see it painted hehe are you building a helmet from scratch ? or using parachristos helmet
ironmaided
Sr Member
Re: Ironman MK17 "heart breaker" FOAM build: update 05/15/13 abs done
hmmmm i'm planning to make a fiberglass parachristos mark 17 helmet soon and a foam helmet too but i'll try to modify the low poly 3D model again. . .
hmmmm i'm planning to make a fiberglass parachristos mark 17 helmet soon and a foam helmet too but i'll try to modify the low poly 3D model again. . .
streetsoul
Sr Member
Re: Ironman MK17 "heart breaker" FOAM build: update 05/15/13 abs done
sweet sounds gd man
sweet sounds gd man
