Valcrow
Active Member
Hey guys,
So a lot of you have seen this one already. And you can view all the wonderful examples of them there. But we want to make our Lightsaber kit available officially! (as a printed kit)
If you already have a 3D printer, DON'T buy from us. (unless you specifically just want to support us) We have made the files publicly available here. So download and print away!
I get requests once in a while asking if we'll print it because they don't have a 3D printer and don't want to go the 3D hubs route due to the inconsistency of quality. In which case, now we do!
It was also on tested (a few times actually)
You can see the full gallery here: http://www.redicubricks.com/3d-printed-full-sized-obi-wan-lightsaber/ They are printed at high resolution 60-90 micron layers on Ultimaker 2+ printers in PLA. We clean up the brims and supports as required. This is the quality you can expect from our kits:
(It is usually all grey or silver, the bubblestrip is transparent filament, which is more like translucent)
It comes test fitted, but unassembled. Minor cleanup may be required, but it's generally good enough quality to paint right on top. (unless you want a mirror finish)
It comes in parts like this:
It's very easy to assemble and requires no tools or even glue. We also have a painting & assembly guide for reference:
You can buy them here for $80CAD (~$62 USD) http://shop3d.ca/product/full-sized-obi-wan-lightsaber-raw-print-model-kit/
Or reply to this thread.
And you can see reviews and other RPF'ers builds here: http://www.therpf.com/showthread.php?t=212739
Thanks for looking!
Valcrow
So a lot of you have seen this one already. And you can view all the wonderful examples of them there. But we want to make our Lightsaber kit available officially! (as a printed kit)
If you already have a 3D printer, DON'T buy from us. (unless you specifically just want to support us) We have made the files publicly available here. So download and print away!
I get requests once in a while asking if we'll print it because they don't have a 3D printer and don't want to go the 3D hubs route due to the inconsistency of quality. In which case, now we do!
It was also on tested (a few times actually)
You can see the full gallery here: http://www.redicubricks.com/3d-printed-full-sized-obi-wan-lightsaber/ They are printed at high resolution 60-90 micron layers on Ultimaker 2+ printers in PLA. We clean up the brims and supports as required. This is the quality you can expect from our kits:
(It is usually all grey or silver, the bubblestrip is transparent filament, which is more like translucent)
It comes test fitted, but unassembled. Minor cleanup may be required, but it's generally good enough quality to paint right on top. (unless you want a mirror finish)
It comes in parts like this:
It's very easy to assemble and requires no tools or even glue. We also have a painting & assembly guide for reference:
You can buy them here for $80CAD (~$62 USD) http://shop3d.ca/product/full-sized-obi-wan-lightsaber-raw-print-model-kit/
Or reply to this thread.
And you can see reviews and other RPF'ers builds here: http://www.therpf.com/showthread.php?t=212739
Thanks for looking!
Valcrow
Last edited by a moderator:
