Pepsi is making Pepsi Perfect? BTTF

Found a cool pic! Someone has made a Pepsi perfect in Lego :) IMG_2925.JPG
i think it's very cool :cool
 
100_0901.JPG100_0904.JPG100_0906.JPG100_0930.JPGthe dark brown ones are two colors light brown & dark so depending on the lighting they look different. I think I like them more then the lighter color bottles . they cost me around 7$ to make each one . the taller ones dip in at the tops like the real ones do. I may go back & sand the lids for the smaller ones . I have a few exstra bottles if any one wants me to make more.
 
cavx said:
This is just a little side project I have been working on for a while. One of those "something from nothing" builds.

I started with a "Jarra" choc-coffee jar, removed the label and found a cap off a hair spray product that looked about the right size. Of course the cap was to straight and had to go. It also had no thread, so just pressed onto the top of the coffee jar's thread.

http://www.therpf.com/attachment.php?attachmentid=610088&d=1459483989

For Chirstmas 2015, my wife got me one of the Mexico Pepsi Perfect bottles. The cap fits this coffee jar better than it fits its own bottle with less stress on the thread.

http://www.therpf.com/attachment.php?attachmentid=610086&d=1459483751

So using the original lid off the coffee jar, a plastic cup, some duct tape and epoxy (liquid glass) I was able to make a screw on lid for this bottle that has a much better shape.

http://www.therpf.com/attachment.php?attachmentid=610085&d=1459483687

It is not "Perfect" but closer to the grail prop than the official licensed products. Over the weekend, I will see if I can thicken up the walls of the bottle by rotating some product in there. If I can get at least a 2~3mm wall, I should be able to mold and cast the parts bubble free. I'd like to add the flip up straw part, but at this stage just want to see if the bottle can be made in clear. The cap still needs work as it was crudely turned on my press drill. I do have access to a lathe, but decided to wing this one. If this works out, it will be worth machine time where I would also get the slot milled in.
Click to expand...

what is the white thing in the first image is it the pizza from back to the future or is it part of the coffee bottle?
 
attachment.php


casperdj777 said:
what is the white thing in the first image is it the pizza from back to the future or is it part of the coffee bottle?
Click to expand...

The bottle is a found item. The bottle lid is custom made using the actual lid for the thread and the other item in the photo is the mini Pizza in a raw (unpainted) state.
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Knightmare
Rocketeer Helmet Comparison is it me ?
Replies
3
Views
244
Synz314
Synz314
Snow Builder
BTTF Flux Capacitor Wall Light
Replies
16
Views
1,587
Snow Builder
Snow Builder
starks
Making an Indiana Jones Grail Tablet, painted and weathered
Replies
10
Views
1,124
starks
starks
Palantirion
Pal Tiya, what is this witchcraft?
Replies
7
Views
494
Palantirion
Palantirion
D
Making a faux e-ink display?
Replies
2
Views
343
smithjohnj
S
Back
Top