Do you have a life size Jawa? If not you need one to hold that thing!
OdiWan72´s prop family
- Thread starter OdiWan72
- Start date
I managed to get the DEC grips to fit my MGC's nicely.
Both of my MGC's had the same problem. The "9" in the grips.
Whoa BABY! Nice Jawa blaster!
It´s a piece of x-shaped plastic...the origins are unkown.
Thank you so much for your comments gentlemen :$
Small update with some things I have been working on lately plus some new aquisitions
Lets start with the detention block camera, conversion parts supplied by blue realm (love this kit!). As you can see I decided not to paint the viewers -for now :lol- but the two tone color is growing on me :lol Still have to add the stickers and the bracket to secure it to my offices wall
Next are a few pictures of two Obi sabers I built. One is based on an old russrep V2, the second one uses an Anakin Starkiller V2 from his first run.
Had to get in on Dans run for even more accurate V2´s plus nicksdads run of Luke ROTJ hero saber (which replaces my old SD Studios saber)
Was lucky to get one of the recently surfaced female BPs (thanks again guys!).
Already have a converted mal BP on my recent Obi saber, along with real grenade, Graflex clamp and handwheel. Was also able to buy a real Booster, so once I have everything in hand I will redo my saber to make it all real and add the missing details such as cotter-pin, screws etc. :cool
Attached you´ll find some comparsion pictures of my male BP from the first RR engine and my new female BP. besides of the already known size difference, there also seems a significant difference regarding their finish!? The male has a matte surface, where the female is much shinier after removing all the debris is was encapsuled in...
Last thing to show for now is the RR flame tube, that came from the same engine that my new BP origins from
as always...thx for looking
Lets start with the detention block camera, conversion parts supplied by blue realm (love this kit!). As you can see I decided not to paint the viewers -for now :lol- but the two tone color is growing on me :lol Still have to add the stickers and the bracket to secure it to my offices wall
Next are a few pictures of two Obi sabers I built. One is based on an old russrep V2, the second one uses an Anakin Starkiller V2 from his first run.
Had to get in on Dans run for even more accurate V2´s plus nicksdads run of Luke ROTJ hero saber (which replaces my old SD Studios saber)
Was lucky to get one of the recently surfaced female BPs (thanks again guys!).
Already have a converted mal BP on my recent Obi saber, along with real grenade, Graflex clamp and handwheel. Was also able to buy a real Booster, so once I have everything in hand I will redo my saber to make it all real and add the missing details such as cotter-pin, screws etc. :cool
Attached you´ll find some comparsion pictures of my male BP from the first RR engine and my new female BP. besides of the already known size difference, there also seems a significant difference regarding their finish!? The male has a matte surface, where the female is much shinier after removing all the debris is was encapsuled in...
Last thing to show for now is the RR flame tube, that came from the same engine that my new BP origins from
as always...thx for looking
newmagrathea
Sr Member
Lovely collection of lightsabers. I'm alway surprised at the size of the detention block camera, for some reason I've always thought they were much smaller.
matty matt
Sr Member
Oh man, Markus has the most wonderful things.
Awesome! So is the flame tube going to be an IG88 head or a drink dispenser?
Many thanks gentlemen :$
I think I will leave the flame-tube unmolested, not keen on cutting it down for a IG88 conversion.
But I plan to make it a IG88´ish lamp or something, we´ll see. If all plans fail, it will just be a piece of "junk" to compliment my 1:1 Jawa :cool
@Unfated/ SVS:
I think I will leave the flame-tube unmolested, not keen on cutting it down for a IG88 conversion.
But I plan to make it a IG88´ish lamp or something, we´ll see. If all plans fail, it will just be a piece of "junk" to compliment my 1:1 Jawa :cool
Last edited:
Any specifics on that russ rep V2/ANH stunt? That paint job is rare around here, but more accurate to photos I at least feel.
What specifics are you talking about? I just wanted to put the "spare" sabers I had to good use and felt inspired by the great work done by matty matt (IIRC), based on the few pics of the ANH obi stunt sabers. Still have a two of these microswitches with red cap, if anybody is interested...
btw: Here is a quickly taken pic of the CfO helmet I received three days ago...
What a fugly piece of ******!!! And this is meant in the best possible way :lol
I can´t even imagine all the work, that the prop dept. had to put into cleaning/ finishing the mask and dome...it´s aweful (doesn´t show from a distance) :rolleyes But boy, this helmet has character...I love it.
Any idea how to -non-permanently- attach the dome to the facemask for display (while aligning it correctly)?
Send me prayers, that my wife will NEVER EVER ask me, what I paid for this "piece of junk". She´s understanding, but I am tired of her shaking head, when I tell about the prices for my acquisitions :lol
What a fugly piece of ******!!! And this is meant in the best possible way :lol
I can´t even imagine all the work, that the prop dept. had to put into cleaning/ finishing the mask and dome...it´s aweful (doesn´t show from a distance) :rolleyes But boy, this helmet has character...I love it.
Any idea how to -non-permanently- attach the dome to the facemask for display (while aligning it correctly)?
Send me prayers, that my wife will NEVER EVER ask me, what I paid for this "piece of junk". She´s understanding, but I am tired of her shaking head, when I tell about the prices for my acquisitions :lol
