ImperialShuttle
Member
Right, I was using too much abrasion. I knew not to sand the main body, but had no idea the clamp and ears also had a coating that could be removed. My bad.
when "sanding" the bottom of the tube, do you guys go in all kinds of random patterns? keep it a swirl? or keep the grain all 1 way? any photos of the dulled down versions?
The grips are just the rubbery ones from the custom saber shop, and screws instead of rivets because I like them.
Are there any kinds of double sided tape to avoid when attaching t-tracks to the flashgun body? I used permanent Scotch double sided tape.
This is my Roman Graflex with changed brass pins, brass contacts and red button from TGS. During the assembly, tiny springs have fallen out...someone knows where these sit? Maybe behind the brass pins? Thank you very much
[url]http://i1262.photobucket.com/albums/ii605/mz1989/IMG_5862_zpsu5gdsxkm.jpg[/URL]
[url]http://i1262.photobucket.com/albums/ii605/mz1989/IMG_5863_zpsrxwqmoe3.jpg[/URL]
On vintages the two sockets on the back where the reflector locks in have a little metal piece that sits on top of two small springs. These push up on the reflector to keep it tightly attached by the little hook that goes in the square hole on top. This is kind of confusing, but hope it helps!
Sent from my iPhone using Tapatalk
Could also be the contacts that connect the pins electrically, they sit behind where the pins thread in
Sent from my iPhone using Tapatalk
In all 6 holes, or only 3? I have 2 fallen out and I think one is under the upper pin under the red button, when I see it correctly on mine. Thanks for your help
No problem, here's where they go on the patent illustration! https://uploads.tapatalk-cdn.com/20170421/8a5af51e6a4c82ab21da2d82ac81ae95.jpg
No problem, here's where they go on the patent illustration! https://uploads.tapatalk-cdn.com/20170421/8a5af51e6a4c82ab21da2d82ac81ae95.jpg
anyone know the name of the tool that is used to remove the brass pins? KR sabers has a video somewhere but i can't seem to find the exact name of the tool or its sizes :cry
Bit driver, don't remember what size
Sent from my iPhone using Tapatalk