Opened a few more spots, once filled will have to start a second run.
Hey Guys, There was just to many questions regarding the switch holder in the other thread.
So I decided to open a new interest thread for the Switch holder, since this can also be used on the graflex saber bubble strip as well.
Basically its a custom holder with micro momentary switch.
2 Separate kits
30 awg or 28 awg wire recommended for wiring to micro switches
Static kit DIY- for those who have a static version Crystal chamber only. $25.00 Per kit DIY
The static kit will Include-
Switch holder
Micro switch with momentary to latching converter
30 awg wires
LED ( please let me know if u want a steady or flickering effect like in the video )
Button Battery style holder. ( needs 2 3v batteries not included )
Static kit Assembled- $35.00
Everything is soldered together for you.
Paypal ID Rudyvillalpando@aol.com
If you are not having this shipped with the Crystal chamber shipping is extra. Please let me know
Please send payment "separate" from Crystal Chamber Payment,and Mark as Switch kit and include forum Name
Here is the layout for the Switch holder.
List for Static Version-
1.Tom1971-Paid
2.jediwizard
3.MCM-Paid (Flicker Effect)
4.Jamiemp-paid
5.ajhix
6.Jedimaz-Paid ( Flicker effect ) A.
7.Heartblade-Paid (Flicker Effect)
8.The Pawn -Paid
9.Kevin Gossett-Paid
10.thrgk-Paid
11.Ltsmash1200-Paid ( Flicker Effect )
12.teecrooz-Paid (Flicker Effect)
13.lolo080-Paid (Flicker Effect)
14.jedimax-Paid (Flicker Effect )
15.Chrijack-Paid (Flicker Effect)
16.Iansolo-Paid (Flicker Effect)
17.Adomeitw-Paid (Flicker Effect)
18.stormshadow-Paid (Flicker Effect)
19.stormshadow-Paid
20.Neorutty-Paid (flicker effect )
21.SphericThor-Paid (Flicker Effect)
22.MacBeath-Paid (Flicker effect )
23.Jetsetwilly-Paid (Flicker Effect)
24.andsuor-Paid
25.treeman-Paid
Second Run...
1.Edraven99-Paid (flicker effect)
2.Mburkit-Paid (flicker effect)
3.Mikeyx-Paid (flicker effect)
4.Maxhebus
5.Marsattack- Paid (flicker effect)
6.Darttniklfrtiz Paid
7.the pawn Paid
8.The pawn Paid
Update, There are 2 types of bubble lens, one is just flat, another has 2 side ridges.
If you have the side ridges and the lens can not be pushed down, Here is the fix..
First off, put a piece of masking tape down the middle of the stirp, and slightly sand the ends.
I did from the two bubbles on each side so that there is kinda an arch in the middle.
If need be put a very thin piece of plastic down the middle of the strip.
The Switches are adjustable if needed. The pressure of the clamp will hold the switch in place. a small dab of superglue will help also in you want.
I will be adding more info, I'm looking through all the posts and pms for other info that has been asked. please check back for updates............
Hey Guys, There was just to many questions regarding the switch holder in the other thread.
So I decided to open a new interest thread for the Switch holder, since this can also be used on the graflex saber bubble strip as well.
Basically its a custom holder with micro momentary switch.
2 Separate kits
30 awg or 28 awg wire recommended for wiring to micro switches
Static kit DIY- for those who have a static version Crystal chamber only. $25.00 Per kit DIY
The static kit will Include-
Switch holder
Micro switch with momentary to latching converter
30 awg wires
LED ( please let me know if u want a steady or flickering effect like in the video )
Button Battery style holder. ( needs 2 3v batteries not included )
Static kit Assembled- $35.00
Everything is soldered together for you.
Paypal ID Rudyvillalpando@aol.com
If you are not having this shipped with the Crystal chamber shipping is extra. Please let me know
Please send payment "separate" from Crystal Chamber Payment,and Mark as Switch kit and include forum Name
Here is the layout for the Switch holder.
List for Static Version-
1.Tom1971-Paid
2.jediwizard
3.MCM-Paid (Flicker Effect)
4.Jamiemp-paid
5.ajhix
6.Jedimaz-Paid ( Flicker effect ) A.
7.Heartblade-Paid (Flicker Effect)
8.The Pawn -Paid
9.Kevin Gossett-Paid
10.thrgk-Paid
11.Ltsmash1200-Paid ( Flicker Effect )
12.teecrooz-Paid (Flicker Effect)
13.lolo080-Paid (Flicker Effect)
14.jedimax-Paid (Flicker Effect )
15.Chrijack-Paid (Flicker Effect)
16.Iansolo-Paid (Flicker Effect)
17.Adomeitw-Paid (Flicker Effect)
18.stormshadow-Paid (Flicker Effect)
19.stormshadow-Paid
20.Neorutty-Paid (flicker effect )
21.SphericThor-Paid (Flicker Effect)
22.MacBeath-Paid (Flicker effect )
23.Jetsetwilly-Paid (Flicker Effect)
24.andsuor-Paid
25.treeman-Paid
Second Run...
1.Edraven99-Paid (flicker effect)
2.Mburkit-Paid (flicker effect)
3.Mikeyx-Paid (flicker effect)
4.Maxhebus
5.Marsattack- Paid (flicker effect)
6.Darttniklfrtiz Paid
7.the pawn Paid
8.The pawn Paid
Update, There are 2 types of bubble lens, one is just flat, another has 2 side ridges.
If you have the side ridges and the lens can not be pushed down, Here is the fix..
First off, put a piece of masking tape down the middle of the stirp, and slightly sand the ends.
I did from the two bubbles on each side so that there is kinda an arch in the middle.
If need be put a very thin piece of plastic down the middle of the strip.
The Switches are adjustable if needed. The pressure of the clamp will hold the switch in place. a small dab of superglue will help also in you want.
I will be adding more info, I'm looking through all the posts and pms for other info that has been asked. please check back for updates............
Last edited by a moderator: