Bigturc
Sr Member
Hey guys,
Following Robn1's excellent conversion thread, I hunted down a 5 gallons paint for the modest sum of 117$ canadian.
Here's my own conversion thread!
Here's a link to the Grizzly H63329 2.5 gallon conversion thread:
http://www.therpf.com/f9/pressure-casting-grizzly-paint-pot-conversion-184777/
Here's the tank when it arrived
Center mixer detached. You basically just unscrew the big bolt from under.
Paint syphon removed. Remove the valve first to get it out of the way, then the top bolt, then the bottom rod.
Bought a 1/2" plumber plug for about 2$ and screw it in with teflon tape.
Next step is to close that center hole. I couldn't find anything at the store and they suggested going to a specialized place to get bigger bolts and seal. I'll update later!
Following Robn1's excellent conversion thread, I hunted down a 5 gallons paint for the modest sum of 117$ canadian.
Here's my own conversion thread!
Here's a link to the Grizzly H63329 2.5 gallon conversion thread:
http://www.therpf.com/f9/pressure-casting-grizzly-paint-pot-conversion-184777/
Here's the tank when it arrived
Center mixer detached. You basically just unscrew the big bolt from under.
Paint syphon removed. Remove the valve first to get it out of the way, then the top bolt, then the bottom rod.
Bought a 1/2" plumber plug for about 2$ and screw it in with teflon tape.
Next step is to close that center hole. I couldn't find anything at the store and they suggested going to a specialized place to get bigger bolts and seal. I'll update later!