real9thdoctor
Member
So there are these platforms the smaller set of turrets attach to for use with the real GRB toy, specifically they sit in the deck elevators of the aircraft carrier the lower half turns into.
I want to use the platform, but couldn't come up with where to put them, or how to attach, as I am trying to keep Diaclone Reboot's modular system in mind. Then I had an idea.
The large tirrets are intended to attach to these fold away platforms that on the real ship lock onto the sides of the lower legs.
The peg they attach to is in a slot to move back and forth. I suddenly realized I might be able to take those platforms apart and glue that peg right onto GRBPLEX, allowing me to use the other platforms and keeping them removable.
So I did.
Now I can slap the other platforms on, and reuse what used to be the main guns.
Or swap out for the turret fighters.
And I also decided the turret fighters should normally be in the large launch bay in the chest. I had Diatrain in there, but it now is in the right leg, where there is the working elevator I rigged (the deck photos from the first picture dump). I had to rip put a sled that held Diatrain in the large bay, and added magnet stickers to the floor. The I took small magnets from a small robot toy...
And glued them to the turret fighters with CA. I had to put them as far back on the belly as I could so rhe canopy can still open.
And so now they sit in the bay beautifully, and won't jostle about inside when messing with GRBPLEX.
At some point in the next 2 or so months I plan on the next and probably final big mod, the new knees. They are 3d printed from Shapeways and designed to be stronger than the original knees and also not reverse bend like the originals, which can bend in either direction, which has caused near disaster for me many times when moving or transforming this thing.
I want to use the platform, but couldn't come up with where to put them, or how to attach, as I am trying to keep Diaclone Reboot's modular system in mind. Then I had an idea.
The large tirrets are intended to attach to these fold away platforms that on the real ship lock onto the sides of the lower legs.
The peg they attach to is in a slot to move back and forth. I suddenly realized I might be able to take those platforms apart and glue that peg right onto GRBPLEX, allowing me to use the other platforms and keeping them removable.
So I did.
Now I can slap the other platforms on, and reuse what used to be the main guns.
Or swap out for the turret fighters.
And I also decided the turret fighters should normally be in the large launch bay in the chest. I had Diatrain in there, but it now is in the right leg, where there is the working elevator I rigged (the deck photos from the first picture dump). I had to rip put a sled that held Diatrain in the large bay, and added magnet stickers to the floor. The I took small magnets from a small robot toy...
And glued them to the turret fighters with CA. I had to put them as far back on the belly as I could so rhe canopy can still open.
And so now they sit in the bay beautifully, and won't jostle about inside when messing with GRBPLEX.
At some point in the next 2 or so months I plan on the next and probably final big mod, the new knees. They are 3d printed from Shapeways and designed to be stronger than the original knees and also not reverse bend like the originals, which can bend in either direction, which has caused near disaster for me many times when moving or transforming this thing.
Attachments
Last edited: