Update - I've switched over to a google order form to make it easier to order my kits. Simply click the link, fill out the form and send the PP. All information needed is available in the form:
theRPF Order Form for rgriesbeck
Update - I just invested in a new 3D printer. It's faster, larger and higher resolution than my older one. Because of this, I am able to print a kit faster and will pass the saving onto you. Most of my existing kits will drop to a new, lower prince of - $100.00 (+ accessories). While I wait for more white filament, kits may come in red of yellow, not that it really matters after a coat of paint...
Pics from the new printer:
The other stuff I make:
Update - 11/2/15
It's now available for sale. It's Captain Harlock's Cosmo Dragoon. Modeled very accurately and printed full size (46cm). With a working trigger, rotating cylinder and removable "bullets".
As with all 3d printed kits, you will need to do some sanding, gluing and assembly. This should be an easy kit to build, it's very straight forward to assemble, and it's only 2 colors. The grips are assembled separately if you wanted to try real wood, or whatever, it'd be easy to do.
The more time you spend sanding and prepping, the better it'll look. You will need some sandpaper (120-280), some superglue and some seam filler like bondo or apoxie sculpt. Then some simple primer and rattle can black should do it.
I will clean off the big support pieces, but there will be some small cleanup needed with an Xacto knife and/or small chisel
theRPF Order Form for rgriesbeck
Update - I just invested in a new 3D printer. It's faster, larger and higher resolution than my older one. Because of this, I am able to print a kit faster and will pass the saving onto you. Most of my existing kits will drop to a new, lower prince of - $100.00 (+ accessories). While I wait for more white filament, kits may come in red of yellow, not that it really matters after a coat of paint...
Pics from the new printer:
The other stuff I make:
Update - 11/2/15
It's now available for sale. It's Captain Harlock's Cosmo Dragoon. Modeled very accurately and printed full size (46cm). With a working trigger, rotating cylinder and removable "bullets".
As with all 3d printed kits, you will need to do some sanding, gluing and assembly. This should be an easy kit to build, it's very straight forward to assemble, and it's only 2 colors. The grips are assembled separately if you wanted to try real wood, or whatever, it'd be easy to do.
The more time you spend sanding and prepping, the better it'll look. You will need some sandpaper (120-280), some superglue and some seam filler like bondo or apoxie sculpt. Then some simple primer and rattle can black should do it.
I will clean off the big support pieces, but there will be some small cleanup needed with an Xacto knife and/or small chisel
Last edited: