Based on the positioning and spacing of the "OUTATIME" lettering and the holes in the plate, the one in the first link is the exact same plate that is seen in the first shot of the DeLorean backing out of the truck.GeordieIndy said:
Based on the positioning and spacing of the "OUTATIME" lettering and the holes in the plate, the one in the first link is the exact same plate that is seen in the first shot of the DeLorean backing out of the truck.GeordieIndy said:
Last edited by DB537; Apr 7, 2012 at 7:43 AM.
That one cannot be an original prop. Look at the words "The Golden State" - it has a completely wrong font.GeordieIndy said:
Do you have a date planned for the Jaws plate?
Second (or third) on the Breaking Bad plates. Capn Cook FTW, yo!
My vote would be for the three magnum pi plates (original ferrari plate; robin-1 ferrari plate; robin-2 audi plate), and then the sothpaw rocky plate.
From reading the boards, i believe these would all sell very well.
Thanks!
djtbell1 said:
howdy all,
here are some of the plates we are planning on producing in 2012. Please post away with your input on the order they should roll off the press or new ideas? We have both stark plates done the 11 cali and the 33 new york (avengers). We also have the jurassic park 18 going to press with the stark plates, those 3 should be done in march.
1) supernatural kansas
2) supernatural ohio
3) jaws (sportsmens paradise plate)
4) the 66' batmobile (bat-1)
5) doc brown's van
6) biff's ford
7) magnum pi's ferrari
8) miami vice's ferrari
9) bumblebee (transformers)
10) stark 11 or stark 33
11) drive angry
12) cobra's awesome 50 plate
13) the a-team
14) zz top
15) wagon queen family truckster (lou glutz)
16) james dean's 550 spyder death car plate
17) rockford files
18) duel semi & car plates
19) carrol shelby's 013 dealership plates
20) falling down d-fens plate
21) kill bill ***** wagon
22) fall guy
23) squad 51
24) lwyrup breaking bad
25) american graffiti chevrolet
26) mannix dart
27) gone in 60 seconds - 614 hso
28) dazed & confused chevelle
29) sothpaw - rocky
30) national lampoons christie brinkley (luv me) ferrari plate
31) jurassic park jeep 18
thanks again for the support,
travis
We are chugging away.
I saw a rough draft of Southpaw, Robin1, and Muff Diver. All are close.
Lou Glutz, a member here helped with some art, and it is a great foundation (we had no where to start), but we are just too damn anal. Tweak it here and there and it will be perfect (eventually). Like the 2015 plate, it will be worth the wait.
We are working with the screen maker on this Supernatural Kansas design. We have the art. Our side is done. Now we have to let them sort it out and find out how to do it high quality in mass production.
So there is progress guys. There will be some new stuff to show you all soon.
Oh, and in regards to the little writing on the bottom of plates, that was our old supplier that demanded we do that. It was their inhouse inventory system. Those are long gone and I believe only exist on the leftover BOSS1 plates as of now.
PS_ Thanks for the list of interest!
Last edited by JimShine; May 5, 2012 at 1:08 AM.
Howdy all,
Well, Jim and I fought this plate all weekend, we attempted to get it out before the movie was released but it didn't happen, we are three days late. The NEW Avengers movie, Acura New York Stark 33 plate is no available.
As always, we are about to release the plates on the website and on Ebay. Once again, we'd like to offer the RPF folks a discount on each of our new plates. The NEW Avengers Stark 33 plate will retail for $18.00 (just like Christine).
RPF Discounted Prices
Stark 33 (Avengers) New York Plate = $16.00 + $3.00 shipping in the US or $6.00 shipping overseas.
If you'd like to purchase the NEW Stark 33 plate at the discounted price, please send me an email with your PayPal email address and I'll send you an invoice. Thanks again for the support, these are not easy or cheap to make but Jim and I are getting better at it with each plate.
Travis ( djtbell1@aol.com ) or send me a PM
How about this plate?
There are enough plates to do. I wonder what happened to the idea of the Demolition Man Plate...? 've heard, the plate is on the To-do List, but is that true? I have some pics of screenused plates if that helps...
I'd kill for an Ohio Supernatural plate!!!!!
Careful, people purchase and sell it for more:
Back to the Future Zurόck in die Zukunft Nummernschilder 1985 2015 NEU Delorean | eBay
What an a**h***
Hello all,
Jim and I are working hard again on new plates! I've got a few questions for everyone. . .
1) The Jaws plate - are we doing screen accurate or BMV / DMV correct? The reason why I ask is the "9" in the plate is NO WHERE NEAR the BMV / DMV version. Also, (we are already changing this) the 72 - 73 plate in the movie says SPORTMEN'S / in 72 - 73 the plate actually said SPORTMAN'S. So, what do we do? We almost always lean towards the props, so we are currently chasing down the dies / stamps for this plate. The prop house that built this plate is out-of-business and the artist that painted it (by hand) is dead.
Here are some plates on-deck for the next two months.
FRESH - Cali Blue plate from the opening credits of The Fresh Prince of Bel-Air
STARK 4 - Hell, we did all of the other ones
SOTHPAW - Rocky's Plate
ROBIN-1 - Magnum PI's Ferrari Plate
DIRTY MARY / CRAZY LARRY - 1969 Dodge Charger Plate
AWSOM 50 - Stallone's COBRA plate
MUF DVR - Screen accurate, by RPF suggestion / Cheech & Chong
Within the next 4 months:
Super Natural OHIO plate - Artwork done - was going to wait on the Kansas tag but it's a nightmare
D-FENS - from the movie Falling Down
Bumble Bee - Transformers chrome-ish fade plate
JAWS
Lou Glutz & LUV ME plates - National Lampoons Vacation - Truckster and Ferrari combo
- So, I'll need your help and ANY other suggestions by September to run them before the end of the year.
- The CL 7634 (Uncle Jesse Plate) I actually have a cardboard version of that plate if you are interested.
- Also, if anyone would like the real (props) of these plates that we use to replicate our plates, drop me or Jim a line. We have a ton of time and money in them but if you'd like them, we'll part with them if the price is right.
- Finally, Jim is still running the Scratch & Dent sale in the Junkyard, while supplies last.
Bring on the suggestions and or question!
Thanks,
Travis
Currently screenused.com has a "Jurassic Park" and a "Iron Man 2" plate for auction on icollector.com. There are very good images of the front and the rear of these plates. Now you can compare with the replicas from Celebrity Machines and see what a great job they have done.
Screen-used Jeep license plate #29 from Jurassic Park
"STARK15" license plate from Iron Man 2
[QUOTE=Monster Dave;1919119]More importantly, what about:
QUOTE]
No love for Magnum?
Ordering several different plates soon!
There's no shame to sell it at a higher price, as long as he sells the original replicas from Celebrity Machines and not a recast of them. That's business.Onkelpsycho said:
Careful, people purchase and sell it for more:
Back to the Future Zurόck in die Zukunft Nummernschilder 1985 2015 NEU Delorean | eBay
What an a**h***
The shame is his item description:
"Die Nummernschilder wurden von einer amerikanischen Propfirma in streng limitierter Stόckzahl fόr Sammler reproduziert. Es gab sie lediglich auf der ComicCon 2011 in San Diego zu erwerben (innerhalb kόrzester Zeit waren alle vergriffen!)"
Translation: "The plates were produced by an american prop company in a strictly limited edition for collectors. There were only available at the ComicCon 2011 in San Diego (and were sold out within shortest time!)"
That's a lie! The plates are still available!
Last edited by Roland; Jul 3, 2012 at 9:07 AM.
No problem if he offers them in an auction and the price goes that high, but it was buy it now I believe or a start price of 55.
But you're right it's more a thing of the information he gives. They're not limited, not that rare and they were not only for sale at the SDCC.
what would you think, if someone offers your napskins on ebay for about $60 each with wrong information...
That happnes always...
I would laugh about it.Onkelpsycho said:
Laugh about the guy who offers it or people who purchase it?Roland said:
I would laugh about it.
Anyway, I just think it's not fair for the "original" seller and not fair for customers... I start to hate that ebay stuff...
Hey everyone. Two new releases this time. The Stark plates have been a hit and there has been a lot of interest in "Stark4". Done:
And for something different, kids of the 90's will dig this. The "Fresh Prince of Bel Aire" Cab plate from the intro.
Last edited by JimShine; Jul 16, 2012 at 3:27 AM.
Those look great...
you're killing us with the wait for SOTHPAW and ROBIN-1 !!!
are they coming soon!??!
thanks for the great work!
Yeah, those two are in the tooling stage now. We wrapped up the design on both of those in the spring.CARLOVER said:
Just bought the STARK4
Sweet!
Has anyone ever made a Spaceballs EAGLE 5 plate?
I have no idea if there are any clear shots of the plate... but I always thought that was a cool one.
http://www.automopedia.org/wp-conten...lls-eagle5.jpg
Reply with Quote
