Another part of the Bespin Security blaster identified

kurtyboy

Master Member
RPF PREMIUM MEMBER
Just noticed this last night. This'll be the third part I've identified on this blaster :)

The part that sits in front of the F4-E bomb part, is the top of one of the carburetor halves from the V8 kit. Still don't know what the pointed part in front of it is so I'll just sculpt if from milliput or something...

bespinpart6.jpg
bespinpart1.jpg


bespinpart2.jpg
bespinpart3.jpg


bespinpart4.jpg
bespinpart5.jpg
 
Then again, that other piece could be the front tip of one of the external fuel tanks. Maybe not the one I have in the pic but the slightly narrower one. There are three different ones in the kit. Also my positioning of the parts and the lengths I've cut them to might be a little off which is throwing it a little.

bespinpart7.jpg
 
Should I ask in this thread?

Can you help me out with the greeblies on this blaster, my friend?

Is the long white part a swizzle stick?

I've been working hard on mine, filling and sanding. The Nemrod was pretty beat up and had cracks in areas. Lucky I got a deal on it!
cbf69b2d5052f596ac1316356e15a429.jpg
56ef511f8b2f9a5f3a51ebbfdc4d0a73.jpg
8d939598c7cd780cf9d01e003efcac05.jpg
7c41613c49b5cb77fa988ea9664e445d.jpg
05da1e041277c9ef7abf30c9a043e4c1.jpg


Sent from my VS996 using Tapatalk
 
Should I ask in this thread?

Can you help me out with the greeblies on this blaster, my friend?

Is the long white part a swizzle stick?

I've been working hard on mine, filling and sanding. The Nemrod was pretty beat up and had cracks in areas. Lucky I got a deal on it!https://uploads.tapatalk-cdn.com/20180426/cbf69b2d5052f596ac1316356e15a429.jpghttps://uploads.tapatalk-cdn.com/20180426/56ef511f8b2f9a5f3a51ebbfdc4d0a73.jpghttps://uploads.tapatalk-cdn.com/20180426/8d939598c7cd780cf9d01e003efcac05.jpghttps://uploads.tapatalk-cdn.com/20180426/7c41613c49b5cb77fa988ea9664e445d.jpghttps://uploads.tapatalk-cdn.com/20180426/05da1e041277c9ef7abf30c9a043e4c1.jpg

Sent from my VS996 using Tapatalk

It is a plastic coffee stirrer...found some at my office many years ago
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top