Subscribe
  1. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 11, 2006, 1:26 PM - #1

    After years of procrastinating (and I mean years), I finally got around to compiling all my notes and screen captures, and created the ENDOR REBEL SOLDIER costume tutorial.

    Check it out when you can...

    http://www.studiocreations.com/howto/endor...dier/index.html

    The tutorial is still a work in progress. As I finish each item over the course of this month, February 2006, I will upload the tips and techniques into the appropriate section. Right now the tutorial mainly consists of research information and blueprints.

    Feedback from all you anal-retentive researchers is highly welcome. Good feedback will result in free parts as I make them. I know what good research is worth.
  2. Member Since
    Feb 2001
    From
    Illinois
    Messages
    1,410
    Feb 11, 2006, 3:05 PM - #2

    GREAT INFORMATION. That must have taken awhile to pull together. Thanks so much for sharing.
  3. blufive's Avatar
    Member Since
    Aug 1999
    Messages
    1,199
    Feb 11, 2006, 6:55 PM - #3

    Great job as always, Jeff.

  4. lonepigeon's Avatar
    Member Since
    Aug 1999
    From
    Michigan
    Messages
    2,254
    Feb 11, 2006, 7:31 PM - #4

    One of these days I'll have to make a donut for mine. My AN-H-15 is still sitting in a box.
    I don't think Richie's came out very accurate.

    Nice work on the pages.
    FYI - The 4 cylinder piece inbetween the two halves of the backpack is part #10 or #11 (cap, cylinder walls - right or left) from the Revell V-8 Visible Engine model. Also part #20 of the engine is the rectangular piece on top of the pack marked as "G" in your pics.
    The info is on the PoSW V-8 page, but I never added it to the character pages.

    PS - The AN-H-15 helmet info (manufacturer/size etc.) actually came directly from the inside of a screen used helmet. Once I got that info I found myself one to match (one pictured on PoSW). There are a few other manufacturers of the same helmet, but I suspect most came from the same batch when they picked them out at the army surplus store.

    PPS - I know how the years of procrastinating a website update can go
  5. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 11, 2006, 10:24 PM - #5

    Chris,

    Oooo, thanks a ton for those tips on the V-8 engine parts. Did not know about that page at all on your site. I thought the V-8 links went to a parts found page, not a listing of all the costumes that have the V-8 parts on them. HA.

    I will update the AN-H-15 info immediately. Did not know that was the actual info from a screen used helmet. Sweet.

    Also, rumor has it that the Helmet Donut was two vaccumfomed plastic halves glued together, and the seam line went from front to back. Do you know if this rumor is true?
  6. lonepigeon's Avatar
    Member Since
    Aug 1999
    From
    Michigan
    Messages
    2,254
    Feb 11, 2006, 10:40 PM - #6

    PoSW V-8 page:
    http://www.partsofsw.com/v8parts.htm

    It is a listing for all V8 parts discovered on props and some costumes. Basically, whatever I could spot them on whether the site has a page on it or not.

    I'm not sure on the donut, but a two piece vac design seems likely.
  7. division 6's Avatar
    Member Since
    Dec 2002
    From
    Central Ca
    Messages
    5,246
    Feb 12, 2006, 1:48 AM - #7

    Nice Job.
    A lot of good pix I could have used the first time around, but since I intend to redo the whole thing again they'll be handy.

    I never noticed the string on the bottom of the jacket.
    Makes sense and would work better than the velcro I used.

    I had a jacket that was an near exact match back in the early 80's but in blue.
    Accept it had a zipper.

    BTW the vest greeblie is only on the left sholder of one or two of the vests.
    Most of them have it on the right shoulder.
    Some of them have the same greeblie that is on the chest while others have something else that seems to have a round object on it.

    Good front shots can be found on the Making of Myth CD.

    On the hooded jacket there are bracers over the cuffs explaning the
    (D. Not sure what we were highlighting here.)
    Your seeing the edge of it.
    I had a hunch that was what it was, than after the DVD came out Arkos posted some caps showing one open and in one case missing during the fighting.

    Both the vest and jacket have pockets.

    Nice to see you included the bomb case.

    It appears that no two commandos have the same pouchs.
    I managed to find the ones from the MoM display
    One of them is the same small pouch that is used by a few of the Desert Troopers.

    Edit.
    Forgot to mention that there is an Italian back pack that has the 2 large pockets.
    It's not 100% accurate but is good for a close enough until the correct one can be found.
    /Edit

    D6
    aka Rogue 9
  8. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 12, 2006, 10:18 AM - #8

    D6/R9,

    Awsome. Thanks a ton for the feedback.

    Yeah the string at the bottom of the jacket eluded me too, it was the DVD screencaps that allowed me to identify it. Up till then the VHS screencaps were too lowres to really identify the thin strings. Even Mookie back in the day never mentioned a drawstring. THANK GOD FOR THE DVD....

    The Bomb/Charge Case. Yeah I actually created and posted the blueprint to that last night. It was just begging to be created. I think it isaccurate, but really not 100% sure. It might still be 15% too big. Only by making one and posting images for a second pair of eyes to comment on will be the true qualifier.

    I hope to have my Hardshell Donut finished next week. I'll post images and let you guys tear into it. I do hope it's accurate enough. Having you guys give feedback just enhances the project that much more.
  9. division 6's Avatar
    Member Since
    Dec 2002
    From
    Central Ca
    Messages
    5,246
    Feb 12, 2006, 10:33 AM - #9

    Looking forward to seeing it.

    The donut I have is from a friend in LA.
    One of my other friends was making a new mold but got side tracked.
    Eventually (hopefully soon) I will finish the assembly of my vac former so I can finish off the mold and produce some as well as the box pack.

    My current pack uses sheets of 2" wall insulation foam as a base.

    I've been tyring to find a match for that case for years now and was intent on making a tool for that as well.
    Nice catch on the clips holding it closed.

    The bottom has a lot of detail on it as well.
    heres all the pix I have of it.


    D6
  10. Darth Kahnt's Avatar
    Member Since
    Jul 2005
    From
    Canada
    Messages
    2,927
    Feb 12, 2006, 10:36 AM - #10

    Looks good. If I ever start a Rebel costume I would consider going with this one.
  11. RICHIES ARMOR's Avatar
    Member Since
    Nov 2001
    From
    Oklahomaaaaaa!!!!!
    Messages
    524
    Feb 13, 2006, 9:30 AM - #11

    Excellent job..Ill refer inquiers about this costume to you..

    Richie
  12. Lupus Yonderboy's Avatar
    Member Since
    Jun 2002
    From
    Sweden
    Messages
    142
    Feb 13, 2006, 12:12 PM - #12

    So this is what you've been up to
    Brilliant work Jeff. That site grows more impressive every time I drop by.
    Keep up the great work and let me know if you ever return to those snowtrooper greeblies
    Cheers,
    Pontus


  13. Member Since
    Apr 2005
    From
    UK
    Messages
    34
    Feb 13, 2006, 3:18 PM - #13

    Great piece of work there.

    Looks like me (right) and my daughter (Leia obviously) did ok after all



    your tutorial would have helped save a heck of a lot of research
  14. Jimbo890's Avatar
    Member Since
    Sep 2002
    From
    Lone Star State
    Messages
    397
    Feb 13, 2006, 5:59 PM - #14

    Very cool. If someone could provide me with some accurate measurements on the helmet 'donut' I could make a mold, and vac form us some.
  15. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 14, 2006, 11:56 AM - #15

    Originally posted by division 6@Feb 12 2006, 03:33 PM
    I've been tyring to find a match for that case for years now and was intent on making a tool for that as well.
    Nice catch on the clips holding it closed.

    The bottom has a lot of detail on it as well.
    heres all the pix I have of it.

    [snapback]1182391[/snapback]

    D6,

    You get one of the first vacuumformed boxes off the table when I vacuumform it. Those are awesome reference shots. Those details strips from the bottom eluded my research. HAR.

    I'll probably work on the Demolition Charge Box late next week.

    Lonepigeaon gets first dibs on a helmet donut when I finish the donut molds too. (yet I am sure my poor craftsmean skills will not be up to his level of anal retentiveness)
  16. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 14, 2006, 11:59 AM - #16

    Originally posted by dacrates@Feb 13 2006, 08:18 PM
    Great piece of work there.

    Looks like me (right) and my daughter (Leia obviously) did ok after all¬*


    You guys did an awesome job on your costumes. Yours and Rougue9's stuff are at the top of the stack in my "Other Costume Attempts" folder.

    -Jeff
  17. division 6's Avatar
    Member Since
    Dec 2002
    From
    Central Ca
    Messages
    5,246
    Feb 15, 2006, 9:34 AM - #17

    Originally posted by StudioCreations@Feb 14 2006, 09:56 AM
    D6,

    You get one of the first vacuumformed boxes off the table when I vacuumform it.¬* Those are awesome reference shots.¬* Those details strips from the bottom eluded my research.¬* HAR.

    I'll probably work on the Demolition Charge Box late next week.

    Lonepigeaon gets first dibs on a helmet donut when I finish the donut molds too.¬* (yet I am sure my poor craftsmean skills will not be up to his level of anal retentiveness)
    [snapback]1184137[/snapback]
    Looking forward to seeing what you come up with.

    You guys did an awesome job on your costumes. Yours and Rougue9's stuff are at the top of the stack in my "Other Costume Attempts" folder.

    I will be re-doing mine with all the new info that has been gathered since my first attempt and will be passing what I did along.
    I just have to remember to take more pictures.

    D6
  18. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 17, 2006, 8:45 PM - #18

    I've updated my "Demolition Charge Box" blueprints based on the bottom images that Division6 has supplied above. Thanks bunches for those. My intial designs about the ribs were WAAAAY off, his images helped immensely with accuracy.

    Check them out...

    http://www.studiocreations.com/howto/endor...x_blueprint.gif
  19. dkwd's Avatar
    Member Since
    Nov 2001
    From
    Winnipeg, MB, Canada
    Messages
    206
    Feb 18, 2006, 9:13 AM - #19

    I know I printed off a tutorial for the soft helmet from somewhere online before. I'll try to find it.

    David
  20. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 18, 2006, 11:01 AM - #20

    Actually , I have a beat up Xlarge An-h-15 helemt being shipped to me as I type. I am going to seam rip the sucker then post the patterns to the tutorial. I'll do an Xlarge version and medium sized version in the same pattern (for me and my girlfriend).

    I'll be recasting the 60-year-old rubber ear cups from that helmet as well. Probably just vacuumform some .060 black ABS to make replica ear cups. I can buy the inner Chamoise ear pads for $25 at a number of online army-surplus stores.

    Thanks for thinking about the project. It's support like this that keeps me going.
  21. division 6's Avatar
    Member Since
    Dec 2002
    From
    Central Ca
    Messages
    5,246
    Feb 18, 2006, 3:05 PM - #21

    I did up the AN-H-15 tutoral a while back but my patterns where made by tracing off one not taking it apart.

    Very interested in seeing a better pattern done up.

    I originally I was going to vac the cups as well but have been thinking of casting them in mask making latex.

    My current afternoon throw together has the cups made of rubberized nylon with some thin foam as backing.

    D6
  22. RPF Premium Member StudioCreations's Avatar
    Member Since
    Nov 2001
    From
    Atlanta, GA
    Messages
    135
    Feb 18, 2006, 4:11 PM - #22

    Yeah, I was thinking of doing the ear cups in Mask Latex or RTV Rubber, but the more I look at the pristine AN-H that I already have, there is just no need to do that extensive of work to make these parts. I just need an ear cup made from material that I can stitch the cloth pieces to and I am sure .060 guage ABS will work fine for that. It's not like the AN-H-15 ear cups flexed a whole lot. ;b
  23. Double T's Avatar
    Member Since
    Jul 1999
    From
    Indianapolis, IN
    Messages
    293
    Feb 24, 2006, 8:46 PM - #23

    Aye, I've got the Division 6 pattern bookmarked, but more ref is good ref.

    Still looking to find time to start the A Wing helmet (remember that discussion at C3, Jeff?) with some ideas I have, and I need that helmet as a base.

    BTW, Jeff...did you get my PM about more reference pics for ya?

    T

Similar Threads

  1. Rebel Endor Wrist communicator
    Darth Lars, Replica Props
    Replies: 0
    Last Post: Apr 24, 2013, 11:38 AM
  2. Rebel outfit for Endor
    Bowelrock, Replica Costumes
    Replies: 2
    Last Post: Jun 22, 2009, 3:55 PM
  3. Replies: 1
    Last Post: May 26, 2007, 5:07 PM
  4. Rebel Helmets Endor
    TD5422, Replica Costumes
    Replies: 2
    Last Post: Feb 16, 2007, 11:13 AM
  5. HELP GUYS ENDOR REBEL HELMET
    BOBATAFF, Replica Props
    Replies: 6
    Last Post: Nov 9, 2006, 11:24 AM