Princess Bride Swords - Costume Pictures, too!

ChickenHaunt

Sr Member
Mrs. Chicken and I have been working on our Halloween costumes for some time now. I'll say the theme is The Princess Bride, and you'll probably figure it out pretty quickly, but before the big reveal, I wanted to do a specific post on one of the most important and complicated parts of the outfits: the swords.


43916328985_8b73ed69b1_b.jpg

44848047511_a62cac7db4_b.jpg



First, we needed Inigo Montoya's sword. Gold, jewel-encrusted, and ornate, it has a very specific look. I don't think you could do the costume justice without getting reasonably in the ballpark. I spent a long time looking for an existing replica, or a "close-enough" product. I looked at many a swept hilt rapier, but nothing even had the general shape of the hilt.


30955317568_2706d36d53_o.jpg



Then I saw that IndyMagnoli is in the process of doing a run of beautiful reproductions of the Inigo sword, but they won’t be ready in time for Halloween, so it was back to doing things the old fashioned way. And I mean that in a general sense, because I had never made something quite this way before.


I thought about making a blade, but the thought of all that grinding of metal was giving me a headache, so I found a cheap rapier for $40 on Amazon to cannibalize.


On studying the construction of what looks like a very complicated, swirly, twisty hilt, I determined that it would be impractical to mold as one piece, or even a few pieces, especially given also the fact that I only needed one. Really, the way the original maker probably made the hilt is out of a few flat pieces bent and fused together. I could take a similar approach with plastic. Cue the 3D printer. I mocked up the concept in paper to be sure it would work.


44777043162_e7c35bced0_b.jpg



I am not a skilled 3D modeler, so I drew out a rough approximation of the intricate details of the guard in sharpie, following the outline I had prototyped in paper. Then I scanned those drawings, and used the tracing tools in Illustrator to turn it into vector outlines. That file could then be imported into a 3D modeling program (I used one of the free ones from Autodesk...123 something), and extruded into one thickness for the main body, and again a little taller for the details. Printing two of everything, I mirrored the objects for the other side of the sword.


44106474374_1e43c99cbf_b.jpg



I printed in ABS, because it’s a bit stronger. Solid infill for extra strength. The thinking here was that if I printed the curved parts in a curve, the layers would be aligned to create weak points where it would snap through the thin bars. If I print it flat, one layer of plastic goes continuously around the whole surface, making for a stronger part. Then it's just a matter of hitting the parts with a heat gun, and shaping them to fit together.


44106480424_70a157eaee_b.jpg



A bit of acetone will bond the reversed ABS parts to each other, and will also seal in the outside, and melt it down a bit. I also rounded over the edges and some of the detail with a dremel sanding drum at this point. It could have been done in the model, but I was pleased with the way this worked out.


My mistake, that I realized at this point, was that the middle Y shaped piece should have been a bit larger. Oops.


44826735851_2a39fe2617_b.jpg



I used a thick 5 minute epoxy gel to fuse the larger curved parts to the main guard, and to fill in the volume there. This stuff retains some flex when it cures, which means it’s less likely to break off at the join than if I had used a totally rigid glue.


44106486064_cb3a2c8931_b.jpg



I did another pass of acetone, but it wasn’t giving me the total smoothness that I wanted, so I went for a product that I really don’t like to use. Smooth On XTC 3D. It’s designed to be brushed on to 3D prints to clean up the layer lines, but it tends to obliterate all detail, too. It often goes on unevenly, and it’s an especially stinky epoxy. Not my top pick. But all of those usual drawbacks (except the stench) will actually work in my favor here, and give me a high gloss surface to do my faux chrome. So I slathered on a couple of coats.


44826742641_ea151de87c_b.jpg



Some Alclad Chrome paint, then a candy coat of orange makes a decent faux gold.


44826745821_555525a9df_b.jpg



I decided to keep the original pommel because the weight of real metal is needed to make the sword balance properly in your hand. The shape was in the ballpark, too, which is one of the reasons I picked this donor sword originally. So then I just had to make a handle to fit between the pommel and the guard. I checked the size with a bit of 1/2” pvc pipe, and ended up using that as a base, onto which I added Freeform Air (leftover from a previous project). I figured out this time that using baby powder to smooth it was a cleaner way to go than alcohol.


44106492074_8e397bc3e6_b.jpg



I let that cure, then painted it and gave it a good wire wrap. Not too bad for $50 and some leftover materials.


44848047641_b1ef5924c3_b.jpg



44798458802_49086c60a1_b.jpg





The Dread Pirate Roberts sword was the next puzzle. I should mention that Factory Entertainment did both swords several years ago in a very small edition. I looked for these, but they’re long sold out, and it doesn’t seem like anyone who has one is parting with theirs. However, I spotted on Amazon what appears to be the manufacturer’s attempt to make a genericized version of the Dread Pirate Roberts sword. It’s the same guard, same handle, but a different pommel and a black blade.


44106339114_a019b9eace_b.jpg



They call it the Black Marauder Rapier. I can work with that. Frankly, this was the sword that could have been pretty generic. Most people wouldn’t know he difference no matter what sword he was holding, but where’s the fun in that?


The blade was blackened, and through some research, I found that you can just scrub it with vinegar and the blackening comes off. Give it a polish with some stuff made for stainless steel kitchen surfaces, and you've got a silver blade again.


44826594811_5e29a7e952_b.jpg





The wrong pommel screws right off, so it would be easy to replace. And I had great reference of the correct pommel, due to the previous licensed replica. The bummer is that the swirling seashell design is a pain to 3D model. Yes, I’ll be printing this one, too. One thing the printer does much better than I do is geometry.


44776922192_2a83669dda_b.jpg



I got it modeled and printed hollow, with a receptacle for an appropriate hex nut. And then I filled the void with lead shot, backed with epoxy.


44826592651_cb61190290_b.jpg

44776920772_ff36cc3ca5_b.jpg



Sand, sand, sand the pommel. Then I gave the guard and the pommel a coat of gloss black enamel and the Alclad chrome treatment. I'm really impressed with how effective the chrome is on this. There's a little ring of metal at the top of the leather wrapped handle. I opted for aluminum tape on this part, rather than masking and painting, and it blends right in.


43916329815_4005876037_b.jpg





If you'd like to make your own swords, I've uploaded the files I made to Thingiverse.


Here's the Dread Pirate Roberts Pommel: Roberts Pommel by ChickenHaunt


And here's the Inigo Montoya guard: Montoya Hilt by ChickenHaunt
 
Last edited:
Re: Princess Bride Swords

Nice work! And thanks for the lead in the black marauder blade, I’ve got one of the replicas from a few years back but now I can get a carry one and leave that as a wall hanger.


Sent from my iPhone using Tapatalk
 
Re: Princess Bride Swords

Whoa those look amazing! The painting came out great! And that's a really clever idea printing the whole thing flat and shaping it post printing.
 
Re: Princess Bride Swords

They turned out great. Really like the idea of printing the guard flat and heat shaping it after. Very clever.

Sent from my SM-G965F using Tapatalk
 
Re: Princess Bride Swords

Thanks folks! I'll be sure to add the costume pictures soon

When you do your Westley/Dread Pirate Roberts costume, don't forget that he starts with his sword on his hip then later switches to wearing it and his belt over his shoulder like a baldric. However, I have no idea how his sword was carried exactly when worn on his hip though.

One other thing, if you end up posing with your sowrd out for people, be sure to put the sword in your left hand and see how many people get it.
 
Re: Princess Bride Swords

I thought about making a blade, but the thought of all that grinding of metal was giving me a headache, so I found a cheap rapier for $40 on Amazon to cannibalize.

Can you give a little detail regarding the rapier you went with, on Amazon, for the base? :)

Thanks!
 
Re: Princess Bride Swords

Briefly, on the costumes...

Inigo:
-found a shirt, dyed and added leather laces
-vest made from scratch with faux leather
-boots are women's boots with added faux leather cuffs
-wig was a cheap number, cut and styled, but set it back on my head to use my own hair as bangs
-mustaches are from Frends Beauty, trimmed
-pants were also used for Han Solo a few years ago
-belt is a "close enough"
-scars are 3rd Degree

Dread Pirate Roberts:
-mask is a vacuum form of her face with faux stretch leather glued on top and an elastic band
-bandana and sash were just lengths of black fabric, hemmed
-added faux leather boot tops to regular boots
-cheap $7 frogs used for both swords
-bought a basic black pirate shirt. The sleeves aren't as full, but it's all so darned black that you can't really perceive whether the details are right
-her own pants and belt.


44686382375_b47fc49f29_c.jpg


44686382575_9b67623a85_c.jpg


31727956958_28f7688a07_c.jpg
 
Re: Princess Bride Swords

Briefly, on the costumes...

Inigo:
-found a shirt, dyed and added leather laces
-vest made from scratch with faux leather
-boots are women's boots with added faux leather cuffs
-wig was a cheap number, cut and styled, but set it back on my head to use my own hair as bangs
-mustaches are from Frends Beauty, trimmed
-pants were also used for Han Solo a few years ago
-belt is a "close enough"
-scars are 3rd Degree

Dread Pirate Roberts:
-mask is a vacuum form of her face with faux stretch leather glued on top and an elastic band
-bandana and sash were just lengths of black fabric, hemmed
-added faux leather boot tops to regular boots
-cheap $7 frogs used for both swords
-bought a basic black pirate shirt. The sleeves aren't as full, but it's all so darned black that you can't really perceive whether the details are right
-her own pants and belt.


https://c2.staticflickr.com/2/1955/44686382375_b47fc49f29_c.jpg

https://c2.staticflickr.com/2/1920/44686382575_9b67623a85_c.jpg

https://c2.staticflickr.com/2/1963/31727956958_28f7688a07_c.jpg

Excellent work and you both look great, But..... disnt it hurt vacuum forming over her face?..... Ouch.
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top