Iron Patriot Build - 3d Print

smilerbaker

Active Member
So having a mk3 war machine under my belt I decided a new project was in order :) something a bit more colourful as the last 2 big builds I've done have been grey, so I've gone for do3d's iron patriot.

Initial impression - Do3d's files are pretty detailed, as part of the package you also get mk2 war machine as well, the difference only really seems to be the chest section but hey, always nice to get 2 for the price of 1


Scaling - Oh dear - this is where it all goes a bit titsup, they haven't included an overall model, all the parts are individual files, in different orientations, so you have to do a lot of messing around importing them all, rotating, flipping etc etc, a total ballache. As I've also found with other do3d files they seem to be based on someone with a very weird body shape, I'm bang on mr middle aged average size, these files seem to be based on a 20 yr old 6ft6 world class body builder, with a tiny head.

due to issues scaling the thing I've had a few useless prints :( trying to keep the proportions in sync just doesn't work so I've had to use different setting x, y and z and different settings per part. I've no idea how its going to end up looking :(

I've also tried to scale it so I can actually move in it, in my war machine movement is pretty limited, I cant, for instance, touch my head with the arms on, which makes putting the helmet on (and taking it off) impossible.

For the tech heads

I'm using a cr10, and cr10 s5, PLA, .4 and .8 nozzle, S3D slicing software
 
Last edited:
here we go

rjR1LpI.jpg



finger time

ZxoLsXe.jpg



all the wasted prints - decided to put them together to make a bust

HoSLiso.jpg



eU4Q302.jpg


The helmet is quite nicely done, a little thin at the bottom

QG7mKeC.jpg



Talking of thin, I printed the cannon :angry parts of it are paper thin, thats 60 hours down the toilet, totally unusable, they also seem to 'forgotten' a piece, its in 2 files but they have no way to join together. I have the impression I am the first person to try to print these files, a bit annoying that do3d seem to let their customers to the QA. They have sent me some replacement files, so we'll see how those go.


Boots are nice

Bcv03gy.jpg


Kjhs542.jpg
 
I've been using make human and another paid app, can't remember the name now, but both have issues creating a representative body shape :( trying to get the model as small as possible and still fitting has been the main issue, not building enough slack into it.
 
I know what you mean.Postures as seen in movies and video games are highly exaggerated and rarely useable for cosplay.I found that out the hard way twice.
Some make a ducttape mannequin and base their costumes off of that,but those lack muscles.
I usually try to tweak the 3d model in pepakura designer so that it matches my own posture,so widen the waist in all directions for starters.It's time consuming moving all those vertexes,but worth it if you can now make your favorite costume to wear.
 
Last edited:
Well its been a while :)

This print has been 'challenging' shall we say, its obvious no one has printed these files before and I've had a bit of toing and froing with do3d to fix issues with them, the gun for instance was paper thin and also missing a way to connect the top to bottom.

They have also not been designed with printing or wearing in mind, so I've had to do some pretty big mods to 1. get the thing to print, 2. get it so you can actually put it on

This has resulted in the chest section being printed 4 times :( that's a serious amount of filament and printing time wasted

lets just say my patients with do3d is wearing pretty thin!! (sorry guys, I love your designs but PLEASE stop using your paying customers to do your quality control!! if you spent as much time checking the files as you did adding serial numbers and your logos all over them they would be ace)

anyway printing is complete

WCrKMmH.jpg


dc9WAqu.jpg


Fu4hqI2.jpg


0XbHNub.jpg
 
That looks great! My own printer has a volume of 120mm cubed and a max speed of 55mm/s, so printing an entire suit is out of the question for me. Any estimate how long it took to do the printing?
 
I've been printing other things while this has been going, but its not been that long a print to be honest, would have been a lot quicker without the 3 failed chests :) maybe 2 months constant printing on 2 printers.
 
did some more painting at the weekend, think the colours are a pretty good match, didn't worry too much about the finish as this is the test helmet, and its not been clear coated.

It became clear while I was taping it up that it has a couple of accuracy issues, fine if you are painting it as a war machine mk2, not so fine as a patriot.

Vt5PirO.jpg


gLhjv8b.jpg


O0QRgtl.jpg


8UqslqG.jpg


qWDTnbr.jpg


2Goz5Ze.jpg
 
Its been a busy couple of months with events so not had a lot of chance to work on patriot, but had a blitz over the weekend, firstly a pic of my war machine and joel ironman at zurich games show a couple of weeks back

mbShIi1.jpg



then it was back to sanding, filling, sanding filling

98eLbrd.jpg


and laying down some paint

KZirXE5.jpg


the 2nd helmet got some work too, not 100% happy with this, can still see some of the base silver between the red and blue, will fix this later, I'm not the best at taping off, stupid old knackered eyes.

ksRkmbn.jpg


the chest plate I'm pretty happy with, first time I've overlaid multiple colours on the same base

zzODsfT.jpg
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top