gt350pony66
Master Member
I decided to try to determine first, what is possible to light up in this tiny ship before I did anything else. I drilled out some places I'd like to light, though I may find out later that I can't. With the way these press-fit together, I may hit a wall or two. At first I thought I'd only be able to light the very center of the engines, however if I just slice off the entire ribbing where the bells attach, I should be able to open up the small triangles on the outer edge, though it will be tedious to do and not get into the ribbing in between :wacko I still need to get some 2mm red LED's for the four, but this is a mock up with a white one to see if it would all fit. looks like it'll work. I also need to acquire a roll of red and black micro wire to make this possible as the wire that comes on these pre-wired LED's is WAY too big. As I get closer to finding out what sort of interior space I have, I may be able to add more FO in the panels I've already pre-drilled...hopefully. Even using the .25mm FO, it's still going to be a very tight fit. Fingers crossed :thumbsup