Page 2 of 3 FirstFirst 123 LastLast
Subscribe
  1. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    5 Days Ago  Dec 5, 2017, 2:19 PM - Re: A Few Blade Runner Blaster Questions #26

    https://www.therpf.com/showthread.ph...ght=3D+printed

    See post 5 and 39 and you will get my feelings on this subject.
  2. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    5 Days Ago  Dec 5, 2017, 2:58 PM - Re: A Few Blade Runner Blaster Questions #27

    Click image for larger version. 

Name:	20171205_192034.jpg 
Views:	19 
Size:	2.12 MB 
ID:	778317
    Click image for larger version. 

Name:	20171205_192255.jpg 
Views:	21 
Size:	3.53 MB 
ID:	778319

    Sorry about the crapy calipers the digital ones died
    Painted the Andrew Foster model is 29mm wide and 28mm unpainted at 100%
    The grips need to be printed at 105% to get to Tom size but are the wrong shape around the finger grooves
    Last edited by johnojodo; 5 Days Ago at 3:54 PM.
  3. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    5 Days Ago  Dec 5, 2017, 3:32 PM - Re: A Few Blade Runner Blaster Questions #28

    I'm so glad you posted that pic sean, I got 30mm OD 20mm ID pipe to start my Steyr receiver. I'd found 1 image with the 1.1740" measurement and was starting to think I'd got the wrong size again
  4. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    5 Days Ago  Dec 5, 2017, 4:14 PM - Re: A Few Blade Runner Blaster Questions #29

    Alright guys these are down an dirty quick and my clippers suck. and my phone camera sucks.

    Click image for larger version. 

Name:	IMG_20171205_160104.jpg 
Views:	19 
Size:	889.3 KB 
ID:	778335Click image for larger version. 

Name:	IMG_20171205_160307.jpg 
Views:	20 
Size:	316.2 KB 
ID:	778336Click image for larger version. 

Name:	IMG_20171205_160330.jpg 
Views:	20 
Size:	450.8 KB 
ID:	778337Click image for larger version. 

Name:	IMG_20171205_160705.jpg 
Views:	18 
Size:	514.9 KB 
ID:	778338Click image for larger version. 

Name:	IMG_20171205_160722.jpg 
Views:	17 
Size:	657.4 KB 
ID:	778339Click image for larger version. 

Name:	IMG_20171205_160746.jpg 
Views:	17 
Size:	508.1 KB 
ID:	778340Click image for larger version. 

Name:	IMG_20171205_160814.jpg 
Views:	17 
Size:	604.6 KB 
ID:	778341Click image for larger version. 

Name:	IMG_20171205_160842.jpg 
Views:	16 
Size:	652.5 KB 
ID:	778342

    will try and get better pictures In a bit. busy helping a friend
  5. renegadecow's Avatar
    Member Since
    May 2011
    From
    Philippines
    Messages
    204
    4 Days Ago  Dec 5, 2017, 10:27 PM - Re: A Few Blade Runner Blaster Questions #30

    sean said: View Post
    https://www.therpf.com/showthread.ph...ght=3D+printed

    See post 5 and 39 and you will get my feelings on this subject.
    Ah, well, that's a bummer. At any rate Rgriesbeck's kit fits perfectly well around the airsoft J-frame I'm building so it suits my needs well enough. The Takagi water gun was just too big profile wise.

    edit: here's Rgriesbeck's cast grip for his printed kit and the water gun. Grid is in cm.
    Click image for larger version. 

Name:	IMG_9193.JPG 
Views:	14 
Size:	2.20 MB 
ID:	778462Click image for larger version. 

Name:	IMG_9192.JPG 
Views:	21 
Size:	2.23 MB 
ID:	778461
    Last edited by renegadecow; 4 Days Ago at 10:35 PM.
  6. Member Since
    Nov 2017
    Messages
    24
    4 Days Ago  Dec 6, 2017, 12:04 PM - Re: A Few Blade Runner Blaster Questions #31

    Thanks for all the images, guys! I really appreciate it. I think I will ask hime to upscale the print a little.
  7. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    4 Days Ago  Dec 6, 2017, 12:18 PM - Re: A Few Blade Runner Blaster Questions #32

    Ok here we go
    Click image for larger version. 

Name:	20171206_163348.jpg 
Views:	9 
Size:	3.49 MB 
ID:	778582Click image for larger version. 

Name:	20171206_163408.jpg 
Views:	8 
Size:	3.90 MB 
ID:	778583Click image for larger version. 

Name:	20171206_163428.jpg 
Views:	7 
Size:	3.92 MB 
ID:	778584Click image for larger version. 

Name:	20171206_163447.jpg 
Views:	9 
Size:	3.88 MB 
ID:	778585
    Click image for larger version. 

Name:	20171206_163506.jpg 
Views:	12 
Size:	3.79 MB 
ID:	778586Click image for larger version. 

Name:	20171206_163552.jpg 
Views:	12 
Size:	3.45 MB 
ID:	778589Click image for larger version. 

Name:	20171206_163645.jpg 
Views:	8 
Size:	4.38 MB 
ID:	778593Click image for larger version. 

Name:	20171206_163718.jpg 
Views:	9 
Size:	4.47 MB 
ID:	778594
  8. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    4 Days Ago  Dec 6, 2017, 12:27 PM - Re: A Few Blade Runner Blaster Questions #33

    Click image for larger version. 

Name:	20171206_163743.jpg 
Views:	7 
Size:	4.45 MB 
ID:	778595Click image for larger version. 

Name:	20171206_163838.jpg 
Views:	7 
Size:	4.25 MB 
ID:	778596Click image for larger version. 

Name:	20171206_163915.jpg 
Views:	7 
Size:	3.13 MB 
ID:	778602Click image for larger version. 

Name:	20171206_164000.jpg 
Views:	11 
Size:	4.18 MB 
ID:	778603
    And the printed cylinder on top of a DP one for good measure

    My printed shooter is far from finished, The aim was to replace most of the parts with steel or ally but once I realised haw for out the measurements where I decided to build my own, I'm giving my self the next 20 years + to get it done
    Last edited by johnojodo; 4 Days Ago at 12:39 PM.
  9. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    4 Days Ago  Dec 6, 2017, 1:48 PM - Re: A Few Blade Runner Blaster Questions #34

    Click image for larger version. 

Name:	20171206_163259.jpg 
Views:	7 
Size:	4.53 MB 
ID:	778620Click image for larger version. 

Name:	20171206_163158.jpg 
Views:	10 
Size:	4.17 MB 
ID:	778622Click image for larger version. 

Name:	20171206_162850.jpg 
Views:	8 
Size:	4.67 MB 
ID:	778624Click image for larger version. 

Name:	20171206_163015.jpg 
Views:	10 
Size:	4.98 MB 
ID:	778625Click image for larger version. 

Name:	20171206_174958.jpg 
Views:	5 
Size:	3.52 MB 
ID:	778627
  10. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    4 Days Ago  Dec 6, 2017, 3:21 PM - Re: A Few Blade Runner Blaster Questions #35

    Click image for larger version. 

Name:	IMG_20171206_150001.jpg 
Views:	14 
Size:	751.4 KB 
ID:	778664Click image for larger version. 

Name:	IMG_20171206_150314.jpg 
Views:	12 
Size:	964.5 KB 
ID:	778665Click image for larger version. 

Name:	IMG_20171206_150553.jpg 
Views:	13 
Size:	897.7 KB 
ID:	778666Click image for larger version. 

Name:	IMG_20171206_150736.jpg 
Views:	12 
Size:	763.7 KB 
ID:	778667Click image for larger version. 

Name:	IMG_20171206_150906.jpg 
Views:	13 
Size:	701.9 KB 
ID:	778668Click image for larger version. 

Name:	IMG_20171206_151129.jpg 
Views:	13 
Size:	711.7 KB 
ID:	778669Click image for larger version. 

Name:	IMG_20171206_151312.jpg 
Views:	13 
Size:	982.6 KB 
ID:	778670Click image for larger version. 

Name:	IMG_20171206_151400.jpg 
Views:	13 
Size:	898.1 KB 
ID:	778671

    Ok tried to match the first eight. but I'm only going to take the grips off for you guys. take it apart when I'm ready to change the metal finish.
  11. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    3 Days Ago  Dec 7, 2017, 1:13 PM - Re: A Few Blade Runner Blaster Questions #36

    Thanks sean any chance you cold do one of the steyr receivers length minus the bit that's drawn back with the cocking lever? and the diameter of the section that blanks off the barrel thread of the steyr receiver


    And disregard the random pic that wont leave this post
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20171206_163158.jpg 
Views:	5 
Size:	4.17 MB 
ID:	778803  
  12. Member Since
    Nov 2017
    Messages
    24
    3 Days Ago  Dec 7, 2017, 1:24 PM - Re: A Few Blade Runner Blaster Questions #37

    Can't tell you how helpful this is guys. Thanks so much for your help.
    The kit is most definitely off.
  13. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    3 Days Ago  Dec 7, 2017, 2:00 PM - Re: A Few Blade Runner Blaster Questions #38

    johnojodo said: View Post
    Thanks sean any chance you cold do one of the steyr receivers length minus the bit that's drawn back with the cocking lever? and the diameter of the section that blanks off the barrel thread of the steyr receiver


    And disregard the random pic that wont leave this post

    This here?

    Click image for larger version. 

Name:	IMG_20171207_135149.jpg 
Views:	14 
Size:	1.08 MB 
ID:	778841Click image for larger version. 

Name:	IMG_20171207_135530.jpg 
Views:	12 
Size:	859.9 KB 
ID:	778842
  14. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    3 Days Ago  Dec 7, 2017, 2:07 PM - Re: A Few Blade Runner Blaster Questions #39

    Second ones spot on, could I get the full length of the steyr bit though


    First pics very helpful too
  15. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    3 Days Ago  Dec 7, 2017, 2:13 PM - Re: A Few Blade Runner Blaster Questions #40

    Attachment 778858
    This length if that ok sean
  16. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    3 Days Ago  Dec 7, 2017, 2:23 PM - Re: A Few Blade Runner Blaster Questions #41

    johnojodo said: View Post
    Second ones spot on, could I get the full length of the steyr bit though


    First pics very helpful too
    my calipers want extend that far. but here'sClick image for larger version. 

Name:	IMG_20171207_141334.jpg 
Views:	15 
Size:	1,007.9 KB 
ID:	778859Click image for larger version. 

Name:	IMG_20171207_141641.jpg 
Views:	13 
Size:	992.8 KB 
ID:	778860 two shots..

    - - - Updated - - -

    johnojodo said: View Post
    Attachment 778858
    This length if that ok sean

    Your attachment failed. cant see
  17. RPF Premium Member
    Member Since
    Mar 2015
    Messages
    176
    3 Days Ago  Dec 7, 2017, 2:25 PM - Re: A Few Blade Runner Blaster Questions #42

    Awesome, thank you very much

    It was just a repost of pic 4 from post 34
  18. Member Since
    Nov 2017
    Messages
    24
    3 Days Ago  Dec 7, 2017, 7:16 PM - Re: A Few Blade Runner Blaster Questions #43

    Alright, I have a new question: How accurate (size wise) is the RACprops resin mold from last year? I have a chance to bid on one, but I wanted to ask you experts opinions first.
    Thanks for your help as always!
    This is the one:

  19. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    3 Days Ago  Dec 7, 2017, 8:37 PM - Re: A Few Blade Runner Blaster Questions #44

    KID Q said: View Post
    Alright, I have a new question: How accurate (size wise) is the RACprops resin mold from last year? I have a chance to bid on one, but I wanted to ask you experts opinions first.
    Thanks for your help as always!
    This is the one:

    https://i.ebayimg.com/images/g/wmgAA...Pt/s-l1600.jpg
    I have two of his kits almost built. In my opinion Awesome!

    - - - Updated - - -

    Your biding on a mold or finished prop?
  20. Member Since
    Nov 2017
    Messages
    24
    2 Days Ago  Dec 7, 2017, 11:14 PM - Re: A Few Blade Runner Blaster Questions #45

    sean said: View Post
    I have two of his kits almost built. In my opinion Awesome!

    - - - Updated - - -

    Your biding on a mold or finished prop?
    Sorry if I was unclear, I was asking if the mold was accurate, but I'm bidding on a mostly finished (still some sanding, filling, etc) blaster.
    The size is accurate though?
  21. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    2 Days Ago  Dec 7, 2017, 11:22 PM - Re: A Few Blade Runner Blaster Questions #46

    KID Q said: View Post
    Sorry if I was unclear, I was asking if the mold was accurate, but I'm bidding on a mostly finished (still some sanding, filling, etc) blaster.
    The size is accurate though?

    Accurate In my opinion.
  22. Member Since
    Nov 2017
    Messages
    24
    2 Days Ago  Dec 7, 2017, 11:30 PM - Re: A Few Blade Runner Blaster Questions #47

    sean said: View Post
    Accurate In my opinion.
    Awesome, thank you. Fingers crossed that I win the bid.
  23. RPF Premium Member sean's Avatar
    Member Since
    Apr 2010
    From
    Jacksonville. Fl
    Messages
    3,822
    2 Days Ago  Dec 7, 2017, 11:44 PM - Re: A Few Blade Runner Blaster Questions #48

    KID Q said: View Post
    Awesome, thank you. Fingers crossed that I win the bid.

    had a look at the gun and the guys back sales. lots of blade runner blasters. you have to look out for something we call recasts. message the dude an ask were they originate from.
  24. Member Since
    Nov 2017
    Messages
    24
    2 Days Ago  Dec 8, 2017, 10:51 AM - Re: A Few Blade Runner Blaster Questions #49

    sean said: View Post
    had a look at the gun and the guys back sales. lots of blade runner blasters. you have to look out for something we call recasts. message the dude an ask were they originate from.
    I have heard about recasts, I'll talk to this guy.
    Thanks!
  25. Member Since
    Nov 2017
    Messages
    24
    1 Day Ago  Dec 9, 2017, 1:07 AM - Re: A Few Blade Runner Blaster Questions #50

    Well, unfortunately the resin stunt blaster went into a bidding war. I'm pretty bummed, I definitely wanted that. Hopefully I can track one down someday.

Similar Threads

  1. Blade Runner blaster from real parts questions
    Djblingbling1, Replica Props
    Replies: 3
    Last Post: Oct 24, 2017, 6:44 PM
  2. Replies: 968
    Last Post: Feb 1, 2017, 12:34 PM
  3. Replies: 21
    Last Post: Dec 8, 2015, 11:39 PM
  4. Blade Runner Blaster Questions
    TheHeroFromDOOM, Replica Props
    Replies: 111
    Last Post: Aug 5, 2015, 7:48 AM
  5. Blade Runner blaster prop questions
    slynger, Replica Props
    Replies: 13
    Last Post: Aug 6, 2012, 12:48 AM

Tags