Destiny hunter Rise Of Iron gear

killerke

New Member
hello everyone,

Since my hunter from destiny is as good as done, i wanted to show you guys what i been up to. This is my first ever foam coaplay( actually first cosplay ever xD)

Let the pics speak for theselves , have fun

This is where it all started, just wanted to test the foam material and could not stop xD
20161031_190854.jpg

Sadly enough i don't have pics from working on the chest piece it self, it was a basic template i gought from Evil Ted and modified it a bit to my wishes, the base is made out of 1cm floor tiles layered up with 5mm high density eva foam for the shapes.
The lines on the belts that wrap around the shoulder are done with my old soldering iron.
20161103_174011.jpg20161107_225732.jpg20161107_225737.jpg20161107_225744.jpg

20161109_145904.jpg20161109_203639.jpg20161109_203647.jpg

This was my first chest plate but it has changed already because i was not satisfied with the result
The second pic is the attachent i made for the chestplate, just simple velcro
20161110_163143.jpg20161110_163147.jpg


Then i started on the pieces for my wrist, also no pics of the wip
They are also made from 1cm floor mats for the base and a second layer of the 5mm foam, with a plastic laminated picture i printed out sandwiched between the layers.


20161117_134320.jpg20161117_134313.jpg20161117_181304.jpg

Then for the shoulders i used a file i had on my computer for a 1st order stormtrooper that i also modified to my wishes. 1cm floor mats and 5mm eva foam.
The carvings are also done with my soldering iron.
20161114_202922.jpg20161114_202933.jpg20161115_155256.jpg

The pieces al together

20161117_181751.jpg


And then it was time for my first test fit :D

20161128_220159.jpg
 

Attachments

  • 20161109_145912.jpg
    20161109_145912.jpg
    1.3 MB · Views: 255
  • 20161118_001048.jpg
    20161118_001048.jpg
    1.1 MB · Views: 239
  • 20161125_163511.jpg
    20161125_163511.jpg
    1.4 MB · Views: 211
  • 20161126_015353.jpg
    20161126_015353.jpg
    6.9 MB · Views: 204
  • 20161126_124123.jpg
    20161126_124123.jpg
    4 MB · Views: 245
  • 20161128_205357.jpg
    20161128_205357.jpg
    1.6 MB · Views: 215
The shin guards, don't have a lot of pics from these :(

20161125_163511.jpg

The upper leg armor
20161118_001048.jpg

And again, test fit :D
20161128_205357.jpg

The painting stage, i wanted to get a metal like color, think i did a pretty good job, i used simpla acrylics and used different silvers, copper, black, ... with drybrushing :D
20161130_152859.jpg20161202_171525.jpg20161202_171528.jpg20161202_171606.jpg
 

Attachments

  • 20161202_171611.jpg
    20161202_171611.jpg
    1.7 MB · Views: 223
  • 20161202_171634.jpg
    20161202_171634.jpg
    2.4 MB · Views: 214
then it was time for the weapon, i went for the monte carlo exotic auto rifle, with a shader on it.

I drew up a plan with inkscape, folowing the tutorial from Bill at punished props

20161126_015353.jpg20161126_124123.jpg


And started carving and layering MDF of different thicknesses.

22117812_10213930888002400_1497745496_o.jpg22092757_10213930888242406_902304929_o.jpg22068874_10213930888322408_1177204224_o.jpg22095672_10213930888082402_382860606_o.jpg

I used small chisels for the details

22068919_10213930888722418_1821315362_o.jpg22095696_10213930888842421_251689345_o.jpg


And a dremel for the lines,...

22070545_10213930888442411_2108770460_o.jpg22092634_10213930889682442_184806724_o.jpg

I coated the small mdf pats in CA glue so they would be rock hard and easy to sand.
22092764_10213930889202430_973788531_o.jpg


I sprayed the rifle with a thick coat of filler primer and sanded everything

22070142_10213930890162454_956099391_o.jpg22117820_10213930889482437_1323021347_o.jpg22119606_10213930889762444_1998979309_o.jpg


Time for the base coat
22092563_10213930890322458_1647548130_o.jpg

And the red xD

22092597_10213930890362459_1971146596_o.jpg

I went for a high gloss finish, i used 2k clear coat from a can
22119626_10213930890642466_1390864223_o.jpg22118060_10213930890562464_1023530381_o.jpg
 

Attachments

  • 22070122_10213930889002425_2097861628_o.jpg
    22070122_10213930889002425_2097861628_o.jpg
    180 KB · Views: 194
  • 22068904_10213930890042451_150784571_o.jpg
    22068904_10213930890042451_150784571_o.jpg
    195.1 KB · Views: 83
  • 22095440_10213930890762469_1438893635_o.jpg
    22095440_10213930890762469_1438893635_o.jpg
    216.6 KB · Views: 195
Then i started on my new chest plate

22069021_10213930891642491_288591894_o.jpg22069038_10213930891562489_173628632_o.jpg22092763_10213930891722493_1356873579_o.jpg22095376_10213930891882497_754667518_o.jpg22070442_10213930891962499_853618413_o.jpg22092474_10213930892042501_1732683411_o.jpg22070399_10213930892242506_398499314_o.jpg

And the belt and knives

The knives are made from plexiglass an foam
the little bags are for my cigarettes, wallet and phone at the con made from faux leather

22095266_10213930887842396_1696450992_o.jpg22070337_10213930887522388_1936586418_o.jpg22070226_10213930887882397_1009536681_o.jpg22070111_10213930887922398_1101846558_o.jpg22092547_10213930892922523_1780367362_o.jpg

Then the works for the helmet,
i installed smoke and led lights
17554461_10212201511289063_8891810489262510189_n.jpg17626365_10212201510689048_356254766406068957_n.jpg17626691_10212201509929029_3858143127003308198_n.jpg17883980_10212353045557325_6575848300133223546_n.jpg18034134_10212422731059419_7616393429801575326_n.jpg18275222_10212540564685186_4523911959859125972_n.jpg17992244_10212422731899440_540778480609608661_n.jpg18033226_10212422731499430_8479665250075678578_n.jpg22070174_10213930890842471_2062211605_o.jpg
22092425_10213930890802470_1484345458_o.jpg
 

Attachments

  • 22070512_10213930890922473_386599424_o.jpg
    22070512_10213930890922473_386599424_o.jpg
    125.6 KB · Views: 180
  • 22092660_10213930892642516_1294797058_o.jpg
    22092660_10213930892642516_1294797058_o.jpg
    196.4 KB · Views: 207
Gonna put those up here as well.

My 3d printed props. The hawkmoon is finished and still painting tje gjallarhorn
ce97a72694a7070e4ef3200f8908652b.jpg
8d6223f967ad262e8aa9c72d315d812a.jpg


Verstuurd vanaf mijn SM-G930F met Tapatalk
 
This looks Amazing!!!! Love the details on the Armor and the cape.

What did you use for the visor? I'm building a Titan helmet right now and I'm sourcing some materials for it.

Thanks
 
Thanks man.
Well for the vizor thing, i used a piece from a car seat cover, removed the foam layer on the back of the mesh and simply glued it in :)
 
Awwwwwesome! Hopefully my skills will be comparable, some distant day.

Since you’re familiar with LEDs, the only suggestion I’d make is to try and “animate” the fire. Easiest way I can think is to backlight the printed flames with red and yellow LEDs pulsing in a candlelight pattern (Arduino time!).
 
by any chance do you still have the foam blueprints/ templates i been wanting to make my hunter from destiny 2 i am not that great or good at makeing the templates but with painting i am good at and i could use any or all the help to make it tips tricks nagging any thing at all if your willing
 
by any chance do you still have the foam blueprints/ templates i been wanting to make my hunter from destiny 2 i am not that great or good at makeing the templates but with painting i am good at and i could use any or all the help to make it tips tricks nagging any thing at all if your willing
No man unfortunatly i don't have anymore. Lost them wile moving some stuff around.

Verstuurd vanaf mijn SM-G930F met Tapatalk
 
looks good dude, and as said before mint work for you're cosplay.... well done indeed....

I have titian armour on my next to do list :) Dam i love that game....
 
looks good dude, and as said before mint work for you're cosplay.... well done indeed....

I have titian armour on my next to do list :) Dam i love that game....
Thanks man. I also made a titan last year. If you are interested check out my progress on my facebook page and instagram. cosplay_guardian
Now i'm working on a daedric armor from skyrim :)

Verstuurd vanaf mijn SM-G930F met Tapatalk
 
Thanks man. I also made a titan last year. If you are interested check out my progress on my facebook page and instagram. cosplay_guardian
Now i'm working on a daedric armor from skyrim :)

Verstuurd vanaf mijn SM-G930F met Tapatalk
This is my titan
1924ab9d86342db23a1f23343b1fed9e.jpg


Verstuurd vanaf mijn SM-G930F met Tapatalk
 
This is excellent!! Would you mind going into a bit more detail about how you added the smoke effects to the helmet?
 
This is excellent!! Would you mind going into a bit more detail about how you added the smoke effects to the helmet?
Thanks. I followed a tutorial from waynes workshop on youtube. Used some parts from aliexpress and some aquarium tubing to get the smoke where i want it.

Verstuurd vanaf mijn SM-G935F met Tapatalk
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top