Subscribe
  1. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Aug 28, 2017, 11:22 PM - Greedo Killer build on Denix #1

    Documenting this Greedo Killer build. I got the kit off of dcarty on here and already had the Weaver K1.5-1 scope. Here are some photos with as far as I got today. Still need to fill the pinholes along with drilling and tapping the holes for the scope mount. Everything has been done with hand tools up to this point.


    Click image for larger version. 

Name:	IMG_0993.JPG 
Views:	65 
Size:	870.1 KB 
ID:	754997
    One with the flash hider attached because I couldn't resist.


    Click image for larger version. 

Name:	IMG_0995.JPG 
Views:	48 
Size:	893.2 KB 
ID:	754999
    The mauser as it sits right now.

    Click image for larger version. 

Name:	IMG_0994.JPG 
Views:	54 
Size:	922.0 KB 
ID:	754998
    Some details.

    Click image for larger version. 

Name:	IMG_0996.JPG 
Views:	67 
Size:	1.30 MB 
ID:	755000
    Comparison between a stock Denix and the work done today.

    Click image for larger version. 

Name:	IMG_0997.JPG 
Views:	68 
Size:	934.3 KB 
ID:	755001
    The kit placed around the mauser.
    Last edited by Gewn; 3 Weeks Ago at 11:27 PM.
  2. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Aug 29, 2017, 11:49 PM - Re: Greedo Killer build on Denix #2

    Small amount of sanding done tonight. I filled the pinholes and markings with JB weld two part epoxy putty. Nothing too exciting done tonight.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1001.JPG 
Views:	29 
Size:	1.40 MB 
ID:	755245   Click image for larger version. 

Name:	IMG_1003.JPG 
Views:	23 
Size:	1.50 MB 
ID:	755246   Click image for larger version. 

Name:	IMG_1004.JPG 
Views:	23 
Size:	1.49 MB 
ID:	755247  

  3. matty matt's Avatar
    Member Since
    Feb 2014
    Messages
    1,405
    3 Weeks Ago  Aug 30, 2017, 4:50 AM - Re: Greedo Killer build on Denix #3

    Looking good. I would suggest reshaping the trigger while you're at it.
  4. newmagrathea's Avatar
    Member Since
    Jan 2014
    From
    Kansas City MO
    Messages
    1,146
    3 Weeks Ago  Aug 30, 2017, 10:15 AM - Re: Greedo Killer build on Denix #4

    I'm going to be doing this sometime in the future. Have you addressed the fitting of the flash hider? I've got one and it's very loose on the end of a denix, an adapter would have to be made.
  5. RPF Premium Member MastahBlastah's Avatar
    Member Since
    May 2014
    From
    USA
    Messages
    304
    3 Weeks Ago  Aug 30, 2017, 11:20 AM - Re: Greedo Killer build on Denix #5

    Subscribed! I love a good Denix-Accurization thread. I've recently completed (minus weathering) my accurized Denix Greedo Killer build, it was a long haul but worth it. Feel free to take a look!

    https://www.therpf.com/showthread.php?t=216859
  6. el toro's Avatar
    Member Since
    Mar 2017
    From
    NYC
    Messages
    112
    3 Weeks Ago  Aug 30, 2017, 3:47 PM - Re: Greedo Killer build on Denix #6

    I was considering this also. There are aluminum or copper tube spacers that would roughly fit inside of the Flash hider but over the barrel. I'll have to look up the links.

    newmagrathea said: View Post
    I'm going to be doing this sometime in the future. Have you addressed the fitting of the flash hider? I've got one and it's very loose on the end of a denix, an adapter would have to be made.
  7. Member Since
    Jun 2009
    Messages
    436
    3 Weeks Ago  Aug 30, 2017, 4:38 PM - Re: Greedo Killer build on Denix #7

    excited for this build! Beginning a GK soon too as Field Marshal has been killing it!

    Biggest thing on the Denix I can recommend is spending the cash on the DEC grips. The denix doesn't look perfect, but substantially better with those on there!

    What do you plan on using for recoloring the Denix? I know you said you were going to plug the pin holes, will you paint or try blueing JB weld? I remember Scottjua mentioning in a video (think it's a Luke ESB that had the hole int he safety) that it did work!
  8. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Aug 31, 2017, 1:39 AM - Re: Greedo Killer build on Denix #8

    matty matt said: View Post
    Looking good. I would suggest reshaping the trigger while you're at it.
    Thanks! I've actually already removed a substantial amount of material from the trigger while comparing it to photos of the original prop. I'll take another look at it

    newmagrathea said: View Post
    I'm going to be doing this sometime in the future. Have you addressed the fitting of the flash hider? I've got one and it's very loose on the end of a denix, an adapter would have to be made.
    the kit I picked up off dcarty came with a small piece of pvc or pvc like material that is used as a spacer. Works like a charm! I'll take a photo and post it in the AM.

    Egon said: View Post
    Biggest thing on the Denix I can recommend is spending the cash on the DEC grips. The denix doesn't look perfect, but substantially better with those on there!

    What do you plan on using for recoloring the Denix? I know you said you were going to plug the pin holes, will you paint or try blueing JB weld? I remember Scottjua mentioning in a video (think it's a Luke ESB that had the hole int he safety) that it did work!
    I have some wood mauser grips I picked up from a surplus store that have the brass center. I can't wait to put them on! As for the coloring, I will gun blue it and then paint it black and weather the paint. I'm not too sure how well the bluing will work where it's been JB epoxy puttied.

    Thanks again everyone for the kind words and enthusiasm! I'm glad others love the GK as much as I do.
  9. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Aug 31, 2017, 11:31 AM - Re: Greedo Killer build on Denix #9

    newmagrathea said: View Post
    I'm going to be doing this sometime in the future. Have you addressed the fitting of the flash hider? I've got one and it's very loose on the end of a denix, an adapter would have to be made.
    As promised, here are some photos of the adaptor that came with the kit.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1007.JPG 
Views:	19 
Size:	1.20 MB 
ID:	755578   Click image for larger version. 

Name:	IMG_1006.JPG 
Views:	17 
Size:	1.08 MB 
ID:	755577  
  10. newmagrathea's Avatar
    Member Since
    Jan 2014
    From
    Kansas City MO
    Messages
    1,146
    3 Weeks Ago  Aug 31, 2017, 12:33 PM - Re: Greedo Killer build on Denix #10

    Is that just a piece of PVC pipe?

    Gewn said: View Post
    As promised, here are some photos of the adaptor that came with the kit.
  11. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Aug 31, 2017, 1:29 PM - Re: Greedo Killer build on Denix #11

    newmagrathea said: View Post
    Is that just a piece of PVC pipe?
    Appears to be.
  12. RPF Premium Member Gewn's Avatar
    Member Since
    Nov 2014
    From
    Portland, OR
    Messages
    138
    3 Weeks Ago  Sep 2, 2017, 1:11 AM - Re: Greedo Killer build on Denix #12

    Tapped the holes for the scope and did a test fit. The grips on there are the stock Denix ones because I need to trim and shape the wooden ones I have.

    For those observant viewers you might notice that the Denix is actually a different one than in the earlier photos. While I was drilling the holes in the body I messed up and grabbed the wrong drill bit. The holes were too big so I grabbed my back up Denix I was using for comparison and started modding. Not all hope is lost for the other one I have. I'm pretty sure I can use it for a ANH hero build once DEC has more kits available. Hopefully this weekend I'll get a chance to paint the gun.

    Quick question for all of you out there. Any suggestions on attaching the grill? I'd like to do it in a non permanent method, but I feel like that may be my only option. Thanks for looking!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1008.JPG 
Views:	28 
Size:	985.5 KB 
ID:	755882   Click image for larger version. 

Name:	IMG_1009.JPG 
Views:	13 
Size:	1.30 MB 
ID:	755883   Click image for larger version. 

Name:	IMG_1010.JPG 
Views:	21 
Size:	1,017.1 KB 
ID:	755884  

  13. Lichtbringer's Avatar
    Member Since
    Jul 2010
    From
    Germany
    Messages
    3,029
    3 Weeks Ago  Sep 2, 2017, 5:43 AM - Re: Greedo Killer build on Denix #13

    GK was build on a MGC, not Mauser.

    So wooden grips look pretty wrong on it.
  14. Member Since
    Sep 2017
    Messages
    1
    1 Week Ago  Sep 13, 2017, 9:52 PM - Re: Greedo Killer build on Denix #14

    You COULD use N54 Neodymium magnets - a little Labor-Intensive, but decidedly Non-Permanent, and strong enough to hold their place through quite a lot...
  15. adan valera's Avatar
    Member Since
    Jun 2016
    From
    Phoenix, AZ
    Messages
    52
    5 Days Ago  Sep 18, 2017, 2:02 PM - Re: Greedo Killer build on Denix #15

    It's really cool to see all of these ANH DL-44 builds. I want to start my own sometime in the future, and these threads will be of great help. Looking good!

Similar Threads

  1. First Build: Greedo Killer: "Accurized" Denix
    MastahBlastah, Star Wars Costumes and Props
    Replies: 57
    Last Post: 5 Days Ago, 2:08 PM
  2. greedo killer denix+3d printed parts build
    tk427, Star Wars Costumes and Props
    Replies: 2
    Last Post: Mar 2, 2017, 7:33 AM
  3. DL-44 / Greedo Killer build
    userd1402, Star Wars Costumes and Props
    Replies: 27
    Last Post: Mar 24, 2016, 6:43 PM
  4. My Greedo Blaster Build (NOT A GREEDO KILLER)
    vader1974, Star Wars Costumes and Props
    Replies: 32
    Last Post: Aug 1, 2014, 5:14 PM
  5. Greedo Killer DL-44 Blaster Build: Denix
    scottjua, Star Wars Costumes and Props
    Replies: 28
    Last Post: Feb 28, 2014, 3:58 PM