Deadpool 2:Cable

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 2, 2017

• #181

kcpstudio said:

Too ****ing big and too ****ing heavy.




- - - Updated - - -

That’s correct. That number for length was just the upper rail.

Click to expand...

Soulinertia said:

End to end, mine is 42" in it's current configuration.

Click to expand...

Thanks and sorry, I read the other post wrong.
Mine is far from complete but is looking to be 43 ish inches long . which is not as bad as I thought since I overshot the top rail length.

 

kcpstudio

Sr Member

• Nov 2, 2017

• #182

Without looking at my CAD, it’s under 41.5 inches. But not by much.

 

Cableguy7000

New Member

• Nov 3, 2017

• #183

Got one finally

- - - Updated - - -

 

Cableguy7000

New Member

• Nov 3, 2017

• #184

How does the gun attach to the back Kenny (kcp) ?? is there something on the back of the vest it hooks onto?????

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 4, 2017

• #185

Still working on the BFG, I have some bondo, sanding ,a xtc-3d coating to do but I have been working on another aspect of the costume too.

I want to do the "cables" on the neck
measured up where I wanted it and patterned it.
sculpted it in clay

Molded it in smoothcast 300

then cast it in dragon skin fx pro platinum silicone.


Let it cure up and I have piece that I think will be doable .


It needs some trimming and will be smoothed out when stuck on and blended with some makeup ,but I am thrilled with my first pull on this one.

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 9, 2017

• #186

the halves of the vector are epoxied together
bondo applied and sanded
coated in xtc 3d. (nice and shiney)
now a lot of sanding on the xtx 3d to get it ready to prime, and sand some more.....
This is made of plastic almost entirely and is getting some heft to it., I cant imagine how heavy the real one, soulinertia, and zombies is.....

 

Soulinertia

Master Member

RPF PREMIUM MEMBER

• Nov 9, 2017

• #187

Looking good Malibu :thumbsup

 

Soulinertia

Master Member

RPF PREMIUM MEMBER

• Nov 15, 2017

• #188

Oh yeah baby! :cool

 

kcpstudio

Sr Member

• Nov 16, 2017

• #189

30lbs unloaded when I was done building it. That’s when I told the prop master..... “you may want to keep Brolin’s a__ in the gym a tad longer”. Lol

Malibu139 said:

the halves of the vector are epoxied together
bondo applied and sanded
coated in xtc 3d. (nice and shiney)
now a lot of sanding on the xtx 3d to get it ready to prime, and sand some more.....
This is made of plastic almost entirely and is getting some heft to it., I cant imagine how heavy the real one, soulinertia, and zombies is.....

View attachment 772120

Click to expand...

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 20, 2017

• #190

After a couple coats of high build primer, lots of wet sanding ,and top coat I am almost there.
Should be able to get it put together in the next couple days.Light at the end of the tunnel.
Scope is PVC and used the rail attachment from a toy gun we had laying around.

 

Soulinertia

Master Member

RPF PREMIUM MEMBER

• Nov 20, 2017

• #191

Looking good. Did you get a Fenix or do you have other plans to build one?

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 20, 2017

• #192

My original idea didn't pan out. So I think I will make an accuracy concession on the Fenix.
Might just get a cheap LED plastic flashlight, paint it black , slap some orange and yellow buttons on it. and be done. lol

 

Cableguy7000

New Member

• Nov 20, 2017

• #193

Progress update

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 23, 2017

• #194

Finally had some time to put it together. Had to drill some holes to put screws in to lock the rails on and the launcher.
it came in right at 43 inches long and the final weight when I get the flashlight figured out will be between 8 and 10 lbs.Its a little front heavy as well.
Krank it to 11 knob 3 d printed , the piece it sets on is foam velcroed into place. picatinny rail and the piece its on is all foam velcroed on.
I cant imagine hauling the real thing around this thing is a beast.
Thanks to Kenney (KCPstudio) and Soulinertia for all their input on this thread its been invaluable

 

Last edited: Nov 24, 2017

Soulinertia

Master Member

RPF PREMIUM MEMBER

• Nov 24, 2017

• #195

Turned out very nice Malibu :thumbsup

How many hours of printing do you think went into it?

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 24, 2017

• #196

Thanks man. I am really happy with the outcome
30-40 hours I believe for print time.
Any suggestions on how to mold this ginormouse thing?
I can figure out the base vector, but the rails .... I am not even sure it's possible?

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Nov 30, 2017

• #197

Got the BFG done and now I am finishing up a few details.
This is my attempt at the boots and buckles



The boots are some rocky lightweight military boots in coyote brown.
not the accurate boots but close.
thougt about just making the straps but needed the boots to be taller so I made the whole "gaiter" set up.

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Dec 10, 2017

• #198

This a good reference pic of the back of the poncho
But on the BFG there seems to be another turn it to 11 dial and switch panel on a different part of the gun.
Is this a second switch panel or did it move (transform?)


it is near his right knee. in line with the trigger of the launcher.
the switches definitely look silver from this shot.

kcpstudio any insight you could give?

 

Last edited by a moderator: Nov 8, 2018

Soulinertia

Master Member

RPF PREMIUM MEMBER

• Dec 14, 2017

• #199

So great!

Can anyone identify Cable's pistol? Looks like a Sig Sauer make possibly . . .

 

Malibu139

Sr Member

RPF PREMIUM MEMBER

• Dec 16, 2017

• #200

226? P220? Single stack I think from the angle in the original pic.