Here are some pics of this finished scope on the HOTH blaster..
e4194c7d947edbf4a33b919d55f50258.jpg
7c3d4b7128f82fc875955e59b8b809bf.jpg
148ebca3f90449b4005e455f4c44ce63.jpg
079fe7a22c246ca3602ff2ce3d986c34.jpg
714070fd19780fb05f5603401fd2c8c0.jpg


I changed out the reticle (haven't epoxy'd anything just yet) as I prefer this one more..
1564bb043a747f6af99cb70b83586e5d.jpg
d33263b4e60b00c535a6f88dfce6213d.jpg
e2d6fbf3b7fb202ba9eff24fe8678ac0.jpg
1117f51e4d55de2bec3f7d127bd6bf39.jpg
f224598b6fdb9f9a819baeef16e4e020.jpg


6a14e9a9f366b18760104a08c5b3690b.jpg


And always.. #BeYourOwnScoundrel [emoji106]




Back to BUILD THREAD index..
 
Last edited:
The reason for subbing out the DEC bull barrel is simple. It's not built for a denix.

For what ever reason they still make it for an MGC Mauser (or a real c96). It still needs to be modified to fit an MGC but everything lines up (as pictured below)..
b33ecb2557043ce4763065f035858ae4.jpg
But finding an MGC is nearly impossible these days and if you do? Well just be ready to pay a lot for the Mauser as they are long out of production..

Though it fits like a glove on an MGC the denix is whole other story. Not so much. Here is some pictures with two denix Mauser sporting the DEC bull barrel along the bull barrel I will be using..
6a87c26c21e8ff1445f28344e1354670.jpg
153551c6312a6a46c50bfda134771c41.jpg
027584c6c593aef8466a258d245a2c5b.jpg


EDIT: As I’m always trying to improve, here is my latest update on the bull barrel. These details bring it that much closer. This way it lines up directly with the Mauser with this mod to the denix. The taper has been updated as well..
3718bd36d36f3feaacf2f529b18df2b6.jpg
0a0a5d02ce93845771ccda46747fb658.jpg
9264b1b1e2029e9d8786bcbdb738c107.jpg
 
Last edited:
Very nice. Most of us who use the DEC bull barrel just file down our Denix to accept it.

Very true but until recently we didn't have much choice either. But it can be done. It can be made to fit with a little determination and a bit of elbow grease [emoji482]

I'm going to be doing something a little different though..

With that I'll jump right into the antenna greeblie part of this build. These parts can be found at "Reade Models" and to quote them directly they sell "The ORIGINAL Star Wars Blaster Cylinder Kits".

What I am planning on doing is building two separate interchangeable bull barrels for display purposes. One with antenna greeblies intact and the other with them weathered as they were at the end of filming. [emoji106]

74c52053a97d3c5fb1ea7458f16b9011.jpg

First I like to cut down the bed part of the greeblies a bit as I personally find them a little to long..
709c3167c06873d7694f122c051c57c1.jpg


Next up is weathering the one that will used for such display..
99ab1f1686f1a918c0dfd82c6fea7a0d.jpg

Add epoxy..
ab9d315f0bde213fbafc8d844c2d7824.jpg


c8d0beab0ef6e04eee40e9073025b1b3.jpg


Now I cut off the tail of the weathered greeblie but only a tad of the unweathered ones..
0e44a5239f64766573d99f3c2f607f12.jpg


Next I epoxy them into place on each bull barrel. I find it best to first attach the bull barrels to the a Mauser itself with the flash hider in place as well. This way everything is where it needs to be (bull barrels at this stage have already been finished and painted FYI)..
27cdb1454701aab1e9b6b962c5446c92.jpg
03395e4449c1927fe5f24a06838dba7e.jpg
650dd6ffde66600a0b85b28548dfdbf9.jpg
 
Last edited:
With these builds the first thing I like to accomplish is getting all the parts attached onto the Mauser itself. First I make room for the bull barrel to slide on by cutting off 1.850in of the barrel itself..
4cea5cf48c046dd38e20a98d52e5ae6b.jpg


Then I tap the hole on the bull barrel itself..
6623d4d83d087222b83f379036c9434d.jpg


Slide the bull barrel into place, screw in the screw as tight as possible so it leaves a mark..
e412f2d0a0755983fa3cdb8c2f1fce30.jpg
4dbce2f9c7445a7e1010cf55361a7f7b.jpg


With a circle punch I find the center for drilling..
3b2183f5c5dd298839b99d7ddddd3447.jpg


Then drill it out by starting with a small drill bit working up to one that is just a bit bigger than the bull barrel screw itself. I won't be tapping this hole as it only needs to keep the barrel from sliding around or coming off..
bf70fd8edaf6732c48eff48f41c1316e.jpg
d69d3b6b6604996172f483171d2c8bd7.jpg
 
Last edited:
EDIT/UPDATE: I’ve since reworked my heat sink grilles to be even more film accurate in design. This picture below breaks it down for you. https://youtu.be/fW5eBxT7vPA
4f92e152fdd89b07e4339f3464ebdcb9.jpg

930499291907d1b1536de68662fc9194.jpg


Now to build the front "Heat Sink Grille" [emoji106]


Three individual "Avron model kit cylinders" is what I will be starting with. Again "Reade Models" is where you can find them..
8bf79d8c1be2dc004527a872da24af8c.jpg


It was these cylinders that were apparently used to create the film accurate grille that was used back in '77. Back then these parts were probably put together without to much thought, but fast forward 40 plus years and it's still a bit of a mystery of how they did it.

I did ask for some advice on how to go about cutting and shaping these cylinders. "We just use a band saw to cut the pieces to the correct size, and various files and sandpaper to clean it up. Hope this helps." This is true but again still leaves a lot to the imagination.

So with that and a lot of trial and error..

"Many cylinders died to bring us this information"

To create this grille you will only need the bottom part on each cylinder. This following diagram shows the transformation that I would like to achieve..

EDIT/UPDATE: Below is the old traditional way of building the grille. I do believe that the actual grille is more inline with how I have it pictured above and though..
be19a1127f808c582e0a65348d79ad3b.jpg
e5d43f9d382f25eba477decefb0049c6.jpg


These are the tools that I will be using..
357efcfe4ce80412eb416f9bcde0f2a8.jpg


Two will be cut 6 rings up from the bottom while the 3rd will be cut 7..
cce6ed83a63802efe4135bdd2218b851.jpg
1ce1c2361f885c631feac40d8fe21eb7.jpg


The first of the three cylinders I will work on will be the bottom part of the grille. This part of the grille requires the 7 rings up from the bottom.

The thickets ring will eventually be cut off but it should be facing down for this part of the build. First I need to mark off where my next cuts will be (0.805in worked for me) so it fits onto the Mauser..
e158a879a961d9b196c33b64ea2a2a02.jpg
22629be4b42f8a5c9148d98572c11db4.jpg


Before taking this part off (pictured below)..
5fd51fcb6778e863a3a26e2868193071.jpg


It's best snip it in down even further. If you don't you risk it breaking..
882ef42b077a0e754028a3173b0ab636.jpg


The bottom front has a bit of a rise so you need to again mark the proper spacing (0.805in [emoji106]). This is where you need to make sure you are cutting into the thickest of the 7 rings..
9dcd7b9b3d96bd65cd03bc75500276ec.jpg

Then snip it and twist them each off gently..
fea8a717b586037edab868b871d22212.jpg
c6bae0f887fa4839a5627546448642c7.jpg


Now I need to snip off this bottom thick ring on both sides. But only the thick ring itself while leaving the spacer between the rings in place..
77b201b71bf802dc15148289c83dfdf6.jpg
bb63869d1d902b0c653c2edd0b3796e4.jpg


It's still not finished as you need now to continue sniping the front. ONLY one more ring up..
88b5acb6399e843c442462cf372411a0.jpg


Now u can sand this bottom part of the cylinder smooth. Make sure to sand the inside flat so it's flush with the Mauser. Not the front obviously but the sides where it will rest..
84b0fb77a6cd04230f296ad3b8feddc9.jpg
 
Last edited:
With the middle cylinder I used the previous one to line it up and make my marks. This will be one of the 6 ring cylinder and the thickest ring will again be at the bottom. But it remains intact this time..
ff9bb94e82e8f242053aa20de8d40e60.jpg
9071c782616171c5da7bd44a827efb95.jpg


Then attach it to the Mauser to figure out where the next cuts should be. This part of the cylinder has a circular shape to it when finished allowing room for the "mystery disk". Then snip it carefully, allowing for a rough shape to be sanding in next..
f817acca8a1b9b17d4933142371cb4c9.jpg
75587a360762a2bbfdb849235e1670cc.jpg


This is also where I shape it so it's rounded on the sides. The Dremel works perfect for this. Again to have it sit flush up against the Mauser I need to make sure I sand the inside back walls flat..
57d3a02db9aaabed8c183f6c6b3615ed.jpg
 
Last edited:
Now onto the final part of this build. There should be one remaining 6 ring cylinder left BUT this time make sure the thickest ring is on the top!

Again I will use the previous part I just finished to mark off where I will need to make my cuts so it lines up..
be874887e5a067f2cd5a8837bfd4a00b.jpg


Then make the cuts and sand..
590a45b4f5d876ef1e2741a066d66743.jpg
206a517b38b4e133277c883c40741feb.jpg


Now all three cylinders should be transformed into the correct parts for this grille..
9e3aa250a931e53cae927c9a9fd78ada.jpg


As you can see. One thick ring should be at the top. One at the bottom on the middle cylinder and no thick ring on the actually bottom part of this Heat Sink Grille..
7ce10455aa1292e713619aefa4a7e9cf.jpg


At this point I just use some tape to keep everything together..
e112b849717df8d8ee8ed3fcea64c207.jpg
a5cb82c21b21322f0debefe104999909.jpg


It's not ready to be attached permanently to the Mauser but I do want to see everything in place to make sure it's lining up where it should be..
6f040b632802babf18ecd207b102fdb4.jpg
f70c9f732804107f9d35017ed39fa7ef.jpg




Back to BUILD THREAD index..
 
Last edited:
"This is where the fun begins.."

What I like to do next is modify my base denix mausers as much as possible. If you noticed the markings on the Mauser in the previous pictures it's because I've already started that process. [emoji106]

So let me backtrack a bit to show just how I go about these mods. First thing I do is take everything apart in preparation for said modifications..
92b582c96b150023e3357b7fa8cc64d1.jpg


Below are just some of the details I will be adding (or in some parts removing)..

[emoji106] The barrel of the Denix modified to fit the FH
[emoji106] Removed the Denix branding
[emoji106] Greeblies
[emoji106] Reversing the Sight
[emoji106] Removing the Bolt on Butt
[emoji106] MGC extraction marking added to Denix
[emoji106] Film Accurate Grip Screws
[emoji106] Reshapping the Trigger
[emoji106] Cleaning up the soft casting
[emoji106] Reshaping the Hammer


This process is pretty much the same for all my blaster builds..

So if you'e already read my previous DENIX mod thread (EMPIRE build) you can skip ahead..

Or.. continue reading [emoji106]
 
Last edited:
EDIT: I’ve since made my life a lot easier by redesigning this part. It’s two parts so when tracing out the mag plate everything lines up. Takes out all the guessing work [emoji106]
86ee60b0fd53fca903d39b8e9014ce32.jpg


There is no particular order to go about modifying your denix so for this build I've decided to start with the base. This part was modeled directly after an MGC Mauser. Using this tool along with a Dremel the effect comes out really nice..
5513396123db0cf6352dfe4952da6c03.jpg
07f9cf3397db172e705239fb58255145.jpg
c2df2787eb311a11ac0c58a96f348319.jpg
2bd6d665cd8985e9a2259dc93d5acbf6.jpg
8ccb3158479cf0671747974610ba69d6.jpg


For the mag release itself use what ever you can find to get things lined up properly. Here I've used a circle template as well as the center punch..
a766bc07bb18d39c7ed99eb024e613ff.jpg
f52fafcdb5806f1462218bd2033c9b07.jpg


For actually drilling out the holes it's always best to start with the smallest drill bit. Find the center punch hole then work backwards..
051e49804d557fe7a7b599cab5b90cc8.jpg
51ecb44f7026fd79e97b6bd41048e3ae.jpg
ca0527736cf6a0f0b58d68a7a30019aa.jpg


I did use one more smaller sized bit (to make the hole a "bit" bigger) in between jumping to this one below..
b05ef6115b564418d8bd15562b1530c2.jpg
51da6e9ecf797abdc946a4331f8e07bd.jpg




Now moving on to using a Dremel and saw to get everything moving towards the end goal which is the MGC..

Starting with the saw I cut the Denix to allow for the film accurate style grip screws to be attached..
e35ff0ad8fce378998f75a69af6e179e.jpg
471512ebe9ee6c31ec4eb7b7c9d660e0.jpg
19a3e3dfe6c9ccb4a277190def733830.jpg
26c904a87bc19653867d8c4f629404d5.jpg


Next I move on to sanding down the denix and again moving closer towards what is more in line with an actual MGC..
18c1f45344a683ea17880afb098d1421.jpg


I use these two sanding grit bands. I generally start with the 60 grit for all the big parts and then do a finishing touch to smooth everything out with the 240 grit before ending with actual sandpaper (320). For the removal of the Denix logo I only use the 240 grit and then finish with the 320 sand paper..
c4932cd45243292f46a6a67163980dda.jpg
adc9f8e83072bc3dda8cff0c510b85c1.jpg
d722806dbf0803723f84618e94666e30.jpg
0b1568183b4d349d677807052e3a11c1.jpg
dcbd603b11cccfa1fbfad12675f6646b.jpg
a5b039c112dce542fe90168096dff332.jpg
4378b2add382a0f66150eb9c57d8e4b5.jpg
a14d642b1a4ebd26551f7b89c9d5fbe2.jpg
96602ca6a4db492a63226ad77a482b59.jpg
4cf759bb97c461134e1d613290b658e3.jpg
eb807ed2355a03ee57a4a91c7d6c26f2.jpg
6f65d2433fd2964629a2882aacbedeca.jpg
bfa3f3b2dc62a34443fd22d9cb107356.jpg
476e144262acbd5262bcf86d89517454.jpg
41f5722ae2206959b11f2b6baf103e8a.jpg


Then drill in this little detail as well..
1ba60176e5c04716fdb1e9ea4e46d1b8.jpg
b9d79c8a54bb5c77f0420300a2ea2a0c.jpg
b90ea9800062f4490a81ab2646d22f3b.jpg


Finally as I mentioned I go over everything with "320" sandpaper to finish it off, including where the motor/coil greeblie will go..
f3e4e6bc798735a8424b18d4fb704d8b.jpg
 
Last edited:
Moving on it's time to reattach the sight, epoxy on the MGC extraction mark as well as fill in all the Denix pin holes. First I start by cutting down the sight pin so it fits accordingly..
dc19a6b9b1c8c8d9f466e4993e91a851.jpg
8f8f03eef9a53c9fda2200c2f282c339.jpg


Dremel off the sharp edges and make it a little more round..
defbe1f1da6f4fcbe88308e1efca319b.jpg
f620ea3fe3e8ce30ad24d6cf4d62148c.jpg


Next I reattach the sight adjuster (??) and reverse it from its original direction (should be facing "right" NOT left - looking from behind). The Denix originally and incorrectly has it facing left..
c5d71fead20b19649cf3e25fd7c6f531.jpg


Now I prep the Mauser by sanding it smooth for its MGC extraction marking. I've seen people mill this but I don't have that kind of equipment and besides the actually part is a separate piece anyhow. So in a perfect world it would be made up from two separate mods.

But since I don't have the ability to mill and this build is to best represent the film prop.. I designed this extraction mark and it works very well.

For the HERO build specifically I like to sand this part down to all silver before adding the extraction marking..
68c478e177a8b7b860fbcece1ba85177.jpg
826c90b618a504f37ed7218a0a096767.jpg
5e404282a917169b6f601470d7deda0b.jpg
cc1c2be5fd7e575be8df9cc0d3371ee4.jpg




427a7e4cd91efae850946f66de1fa5bf.jpg


Depending on the material you use the bottom might have some "bumps" that will need to be lightly sanded smooth. I choose to use "High Definition Acrylate" in black. It's a little on the expensive side in terms of material but it's easy to sand smooth and black all the way through (unlike the "black strong & flexible" which is just dyed black but white underneath)..
9833bff0eb9059423c4c1fb70f50dfc7.jpg
3ef8ced8253eeb7882785acf855ba1da.jpg


Now I add the epoxy but just enough so it doesn't "goo" out on the sides and attach it into place. I will literally hold it down old school style for a few minutes so it dries flat and in place..
77b99dabe602942b021735cd5420084b.jpg
d040df7cf9f287754f41354d9c508737.jpg


Next I epoxy down the sight, otherwise it will continuously (AND annoyingly) flap up and down..
137b3c61c666be8eea6d67d27bba79d1.jpg
06c456b617f79cfd578e177ebb768212.jpg


Once it's dried (and then dried some more) I sand it down (320 grad) one last time to get the extraction mark as smooth and close to flat as possible without losing any of the details itself..
365f61bf10d62e55cd8319ffc97909bd.jpg


Lastly it's time to fill in the Denix pin holes as this is a huge tell between the MGC and a Denix itself. For this I use "Loctite Repair Putty"..
d414b04858e0ee501d5c07976a33e0b7.jpg


Fill in all the pin holes that need it and then patience young Jedi..
281484fafd20825f22884e5029a137bd.jpg
926363a379ec32c79f08d118c0dbe83f.jpg
98f13bd4d3385afc7aaa608b95524dad.jpg
90feb680fc52e37edf2108b3080ba4f7.jpg
 
Last edited:
Now it's time to sand (320) off the Loctite putty and cover up with tape where the motor/coil greeblie will be..
d99c5f7fdb93a9710c61beb3d4cafea8.jpg
4a7fc8f0d10ad49a28593cff215fa848.jpg
50f4609c3a2f194727f23c7d6dd0977a.jpg
2a3439ab94e55f69e564d91f6d4c78e9.jpg
 
Last edited:
Now for the "mystery disk"..

And why is it called a mystery disk? [emoji848] Well because this disk is just that.. a mystery. From my understanding no one seems to know why or what purpose this originally served.

Regardless of its origins it still needs to created. So when creating my mystery disk I like to sand down the part of the Mauser it will eventually go (front left side)..
d075fadbd09241e073beed235bbbff74.jpg


It doesn't have to be completely shiny as the prop itself wasn't. This is completely up to you and your build obviously. There is not right or wrong plus you can always add the wear and tear latter..
09511efad1b61053829b1d9271b22576.jpg
e6654b90f4f62324b22a54e92e6c8ee0.jpg


For making the mystery disk I use 1" circle labels. They "stick, stay & remove cleanly"..
3adb30121653007edac2132ae5f1bf43.jpg


This is why I build the "Heat Sink Grille" first so I know where to place this mystery disk..
a70c964e0f3ede3f050164e018be6c42.jpg


Now since this circle sticker is "one inch", I'll I do is measure in 0.500" to find the center. Mark it and use my center punch..
5af7c1515bb5f0d8a1c59fccc7d01e9c.jpg


For drilling out this center hole I use the smallest drill bit I have. Then cover it with some tape so no paint gets through..
35e107850c6e2c9f5ac99033c3cb6ad2.jpg
5ffc043fddb568249cf9b88c6a60c4cb.jpg
 
Last edited:
I do have a thread of how to rebuild your denix grips to be more film accurate..



Turn your DENIX GRIPS into something a little more film accurate

**If you want to check this thread out there will be a "link" to bring you right back here when finished [emoji106]


DEC also creates wood grips that can make a builders life a little easier though. The grips are already shaped on the inside to fit a denix once you remove this part..
b3fdd8cfb6f4e6ba95e081ee163590d2.jpg



But first you need to add some wood finish..
90d97b47866a6ee7db968a9c771f2409.jpg


a3647927d9a56ef3b9211c8398638f04.jpg


After a couple coat and it's dried you can hammer in the nuts [emoji848]..
9a96f5e964a649f046f3142117f0d811.jpg
71199ec7f462520f4bdafcd220a8fd53.jpg


The screw itself will need to be shortened as it's way to long. I attach everything and then mark where the screw will (approximately) need to be cut. It doesn't have to be exact as I can use your Dremel to clean it up and smooth it out..
431d04d551f9668d425927acf8171673.jpg
d3ecf45a0451c217464460ba0fa261e2.jpg
495b33faae5c6c1dc023bebb59e99589.jpg
fb4aa6dbfc91e9b5da6612e73bdf395c.jpg
 
Last edited:
Next up is prepping the Mauser and parts for painting.

First I need to make sure all the DEC parts are smoothed out as you can see where they broke it off from the casting process. The Dremel will do the trick but be careful as it's soft metal. To much will ruin the part itself..
f572eac569af2f999bd73c2eac62ef84.jpg
77112a2ee0e6d3dc5284e9fe472f69b8.jpg


With the scope wheel this little dial is a little to long out of the box. So a little snip does the trick. BUT make sure to tape it or mark it in some way as it's SMALL and easy to lose if you don't. Then just epoxy it into place..
46e6fd46926d825b0394a7c7cb32653e.jpg
bc391aaeba53c52d06eb44adbdebb05f.jpg
270788511ba0ef796801ebdc2357eda6.jpg



I also like to change out the mounts screws for attaching the scope. The DEC ones are to long and awkwardly stick out the bottom if not. You can cut these as well but being so small it easier to just switch them..
3cd91ba234ef64fbcdfde8d8ac2e0239.jpg


So you can see what I mean this is using one of each. It's a now you see me, now you don't..
da6179bae4eca933cb76f23fba68efde.jpg


Now with the Mauser I like to sand down the hammer and then tape it up as well as adding tape to cover up the extraction marking..
21f2898bb6e7bd744da634be72770a03.jpg
6a13a3e5c97639f282a4cd446606d719.jpg
c82eaafb8c37dc2b368ef66c16b29da9.jpg
cd2c6ef6a89164fdb039314a57b9bbb5.jpg


Next up is prepping the DEC kits and rest of the parts for painting.

For the mount bar..

I would like to duplicate the film look as much as possible..
cdbe7c11303f43b8aea194deb4e676f3.jpg


I've tried weathering it after painting but I do find it best now to add the "weathering" by blocking off those areas with tape before hand. I will remove the tape before I apply the second coat but by doing this it makes the eventual weathering that much easier and more detailed..
824ade824502766408dc0273eaab3392.jpg


Next is to apply tape and add "Q-tips" to the rest of the parts for painting. Tape is important as you want to protect the areas that will slide into each other (bull barrel/ flash hider, scope ends, scope wheel). If to much paint gets in the way you'll regret it later..

8669482abb09a38073f3ca6d03356890.jpg
 
Last edited:

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top