Deathstroke from Batman: Arkham Origins

All good.
i'm trying my had at using the PDO's to make plugs and then creating fiberglass molds.
the goal is for the final part to have no paper or foam (except for padding) and only enough body filler to finishing (hopefully little to none)
Your files are great. the supports you designed into it are quite helpful
 
Last edited:
Got back to this. Cleaned up the file and started working on additional missing elements. I decided to reprint some parts of the armor that were initially made with PLA plastic that will very likely warp during summer cons and I don't want to be limited to sitting inside venues.

It's also an opportunity to change few things and apply knowledge I got during the last year so this time it should not just be more heat resistant but also easier to transport and put on which is great I think
1f642.png
:).

Once it's done it should be made of about 90 elements and who knows how many will be required to print this since there will be slicing involved
1f603.png
:D
 

Attachments

  • armor.png
    armor.png
    558.6 KB · Views: 900
Last edited:
I ended up with 75+ pieces for mine before slicing, crazy how fast it adds up. Keep it up :thumbsup

Got back to this. Cleaned up the file and started working on additional missing elements. I decided to reprint some parts of the armor that were initially made with PLA plastic that will very likely warp during summer cons and I don't want to be limited to sitting inside venues.

It's also an opportunity to change few things and apply knowledge I got during the last year so this time it should not just be more heat resistant but also easier to transport and put on which is great I think https://static.xx.fbcdn.net/images/emoji.php/v9/f4c/1/16/1f642.png:).

Once it's done it should be made of about 90 elements and who knows how many will be required to print this since there will be slicing involved https://static.xx.fbcdn.net/images/emoji.php/v9/f51/1/16/1f603.png:D

View attachment 833419
 
Last edited by a moderator:
Bunch of news, sanding as much as I can till 24th of April when I will be attending the biggest fantasy convention in my country - Pyrkon. During the even I will be wearing this armor all in black so nothing ready yet, but still... should look nice :)
 

Attachments

  • IMG_20190409_101621.jpg
    IMG_20190409_101621.jpg
    931.1 KB · Views: 466
  • IMG_20190411_171713.jpg
    IMG_20190411_171713.jpg
    971.3 KB · Views: 468
  • IMG_20190411_171719.jpg
    IMG_20190411_171719.jpg
    3.8 MB · Views: 448
  • IMG_20190414_150154.jpg
    IMG_20190414_150154.jpg
    6.7 MB · Views: 492
Finished sanding forearms so here's another update to my deathstroke armor. As of now I'm missing side abdominal plates (sanded and primed but I'm not sure how to attach them) and main belt. After that I can start painting (already running some tests) :).

IMG_20190920_111812aa.jpg
 
Last edited:

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top