Marceline's Axe Bass Build from Adventure Time

Warpcell

Active Member
Hello Everyone,

Just finished a build for my daughter to take to Comic Con in Chicago. She's going as Marceline the Vampire Princess and Marceline has to have her Bass! lol

I had a fun time with this build and it was a nice distraction from my HIC build as I wait for parts, so here's a brief description.....

Body = Pine Oval cut with Jig and the neck is two 2x3x1's screwed together and mounted to the "axe".
Strings = Picture hanging wire crimped to eyelets and screwed on.
Pickups = Oval metal brackets with guide holes
Tuning Keys = Screw hooks with washers epoxied on both sides
Paint = Rattle cans with a flat acrylic glaze to reduce it rubbing off on the costume then waxed with pledge.
Knobs = Kitchen chair metal screw on foot pads
Frets = Tamiya hand painted silver

Total cost was about $70.

Here are a few pics and a reference shot of the character with her guitar. I hope you enjoy viewing it as much as I enjoyed building it. I did it over a 5 day period with a total of about 8 hours casual build time. All the parts can be found at Lowes.

Thanks,

Warpcell

photo 1.JPGphoto 2.JPGphoto 3.JPGphoto 4.JPGphoto 5.JPGFinal Photo.JPGMarcelineRocknRoll.png
 
This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top