Spider-man (Raimi) 3D Print Files/Pattern - FREE

Spider-Man-1410915.jpgAnother reference for the front spider.
 
Recconz said:
Just downloaded the Raimi layered pattern file. Is there a file with the symbols already on the suit?
Click to expand...

Here's some I quickly edited using stuff posted previously in this thread. Remember the front spider is split that way to accommodate for the neck dart being sewn up.

File with flat spider symbols

Preview:

PPw1g66l.jpg


Download link:

https://drive.google.com/file/d/0B2efCJNX3F76VTdtMmdNeC05Mkk/view?usp=sharing

File with beveled spider symbols

Preview:

ypZo0RUl.jpg


Download Link:

https://drive.google.com/file/d/0B2efCJNX3F76QU9kNEpPRWVlZDQ/view?usp=sharing

File with different bevel on back spiders

Just the bevel effect is slightly different on the back symbols, not really obvious in the preview.

Preview:

P7nxcFCl.jpg


Download Link:

https://drive.google.com/file/d/0B2efCJNX3F76SjNmMzlxTjdRSG8/view?usp=sharing

I'll get the PSD file uploaded in a bit for anyone who wants to edit the symbols or whatnot, file's a hefty size.
Let me know if there's any problem with the files and have fun :)
 
I hope this isn't to much but I don't really have the photoshop file or skills so I wondering if maybe you could add the 2002 spiders on a pattern file.
 
I looked at my file its says height 25000 an im 5'11 is that good ?
kenlandrum said:
Thanks!
I sized it for someone around 6'.
If I remember correctly, there is a chart or something in a thread here that tells you if you measure from the middle face to the point on the bottom of the belt it should be ____? I am sure someone here has seen it and can point you in the right direction.

EDIT:Found this for you.
View attachment 296183
---------------------------------------------------------------
...and this is from here: http://theleagueofheroes.yuku.com/topic/7648/spiderman-suit#.Ux8u7oVF9WI

The way to resize Spiderman patterns is fairly simple once you know where to measure.

There's a point in between where the eyes are (and the costume's mask kind of pulls apart) that's the top of the line you're going to measure. The bottom is just under where the red belt stops.

Here's what I mean.
View attachment 296184


For a large costume, that length needs to be 29". For a medium 27". For a small 25". A lot of spiderman suit makers will tell you they have custom patterns, but after hanging out for years on the SHH forums, I've been told by more than one source that these three lengths are all they use.

Hope that helps. Oh also, you might want to make sure the saturation on your file gets set to 100% (this may mess with the colors, but you can fix that afterwards)
Click to expand...
 
Does anyone know if there is a way that you could make sure it fits from your computer, because I'm making a suit around 5'11 and I don't want to end up with something too big or too small. Can anyone help?
kenlandrum said:
...and we begin.


-------------------------------------------------------
Spider Files

View attachment 291435
http://www.kenlandrum.com/spider-man/frontSpider.ai


View attachment 291436
http://www.kenlandrum.com/spider-man/backSpider.ai

These are the 3D files extruded to 2mm and slightly beveled.
View attachment 291944

3mm thick versions
http://www.kenlandrum.com/spider-man/spiders-3mm.obj

http://www.kenlandrum.com/spider-man/spiders-3mm.STL

2mm thick versions
http://www.kenlandrum.com/spider-man/spiders.obj

http://www.kenlandrum.com/spider-man/spiders.STL

-----------------------------------------------------------------
Webbing Files

Zipped file for all of the web vectors.
https://drive.google.com/file/d/0B_sNvgA37t6qTC1CSE9hQVZfZzQ/edit?usp=sharing

View attachment 293983View attachment 293984View attachment 293987View attachment 294009View attachment 294029

------------------------------------
Extruded/beveled 3D web files:
View attachment 296733View attachment 296944View attachment 296959

STL
https://drive.google.com/file/d/0B_sNvgA37t6qbmUzZHVqVlo2dDA/edit?usp=sharing
----
OBJ
https://drive.google.com/file/d/0B_sNvgA37t6qSUVvVkxCNzN1Szg/edit?usp=sharing
------------------------------------------------------------------

Pattern Files (Raimi Version)

View attachment 295913

https://drive.google.com/file/d/0B_sNvgA37t6qQktUN3N4MTZfTjA/edit?usp=sharing
Layered .psd (colors, muscle shading, bricks, webbing all separated)

https://drive.google.com/file/d/0B_sNvgA37t6qNFU3WmZzRWhxZzQ/edit?usp=sharing
Bricks only, non-distorted version.

-----

https://drive.google.com/file/d/0B_sNvgA37t6qR1B1cGpHZkNWbTQ/edit?usp=sharing
Flattened (with webs) .jpg

-----
View attachment 381490
https://drive.google.com/file/d/0B_sNvgA37t6qQnhGaU9IUkxfcWs/edit?usp=sharing
NEWEST colors (web guides only, no spiders) "Ready-to-Upload" CMYK jpg

-------------------------------------------------------------------


3D Print Ready Face Shell
Sized to 23cm in height - 3mm thickness
View attachment 298944
https://drive.google.com/file/d/0B_sNvgA37t6qUkdtZVlHb1FiUmM/edit?usp=sharing
3D Face Shell - print ready .obj & .stl formats

-----

3D Print Ready Lens Files

3D Lens Frames - print ready .obj & .stl formats
Sized to 85mm - Snap distance 3.2mm to accommodate 3mm thick face shell above + fabric

View attachment 300603View attachment 300604

STL:
https://drive.google.com/file/d/0B_sNvgA37t6qblZzOUd2QXg1ZTg/edit?usp=sharing
----
OBJ:
https://drive.google.com/file/d/0B_sNvgA37t6qWjZTSXlHMVhtODQ/edit?usp=sharing
Click to expand...

- - - Updated - - -

Tnx dude
kenlandrum said:
5'-11" should be just fine.
Click to expand...
 
Im sorry i ask many questions dude but i downloaded the um Google drive file u said it works for people who's 6 an lower so does it work if your skinny an a small torso an long legs when u order it on demand or do u have too change it before u order it on fod?
kenlandrum said:
6 foot + or- an inch.
Click to expand...
 
Manny said:
Im sorry i ask many questions dude but i downloaded the um Google drive file u said it works for people who's 6 an lower so does it work if your skinny an a small torso an long legs when u order it on demand or do u have too change it before u order it on fod?
Click to expand...

it will fit, but on the crotch it will be lower and not tight fitting.. a bit like hip hop style ;).. it looks not very good. i have also made a own pattern, with longer legs ;)
 
Manny said:
Im sorry i ask many questions dude but i downloaded the um Google drive file u said it works for people who's 6 an lower so does it work if your skinny an a small torso an long legs when u order it on demand or do u have too change it before u order it on fod?
Click to expand...

The issue you're describing is something thats done via sewing your seamstress will need to sew to your measurements. If you're looking for a suit i print fod and sew sub dye, I'm known around here a bit.


Sent from my iPhone using Tapatalk
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

lucas07
size for my raimi mask
Replies
0
Views
175
lucas07
lucas07
Spidermen234352
Where can I find mclean's early Tasm 1 pattern?
Replies
11
Views
1,207
Obesedtofit
Obesedtofit
Bloop
Loki TVA replica belt buckle 3D model & print
Replies
3
Views
638
Bloop
Bloop
Snostorm
Black/symbiote Spider-man dye sublimation suits
Replies
2
Views
821
Snostorm
Snostorm
BenFilms
Resizing Insomnia.cbr Spider-Man patterns
Replies
1
Views
1,760
BenFilms
BenFilms
Back
Top