Hope to have some updated pics tomorrow guys. I ran a fit test on the canister and lid and it went good but I realized that I had made the side walls WAY too thick so I have re-designed it a bit.
I also decreased the diameter of canister and top from 3.6" down to 3.25". The stepped portions didn't look right with the wider canister and top.
Designing the bottle is easy, it's trying to extrapolate the dimensions of the original bottle from the screencaps that's hard...:confused
Here are the dimensions I'm assuming and working with...
The rings on the neck are 3/8" thick on my (newest) design, and are offset 1/4" from each other making for 8 steps total. The bottom step has an inset cut that mates with a lip on the top rim of the canister. This makes the top of the bottle 3" high.
By looking at De Kelley's hand and remembering that he wasn't a very big guy when I met him years and years ago, I assumed his hand to be about the same size as mine and by holding a ruler in a similar fashion to the pic, I'm going with a length of the main canister of 6".
Finally, the bottom stepped portion of the bottle is 1.125". I made the steps on the bottom portion of the bottle the same thickness as the ones on the top and there are three of them from what I can see.