Sooo ... question ... when the V2 is used in many more scenes as the main saber on Luke's belt and on set, as though it was the hero saber, which is mostly seen in close-ups ... then which saber does Luke use as the stuntsaber in this picture?
http://i833.photobucket.com/albums/zz258/Sym-Cha/LukeROTJ7_zpse4cc8fdf.jpg
Or could the V2 be cobbled up rather quickly by the props-department . . . to become a true stuntsaber? This saber has got me very confused at times :confused
Chaim
Let's Nail down the clamp card. The tweaks I did to Slothfurnace's clamp render got a few likes but no critiques or discussion.
I'm not satisfied with calling it good and moving on.
I think you may be right about the right track, I did widen the pins in my most recent tweak post #1015. It also looks as though the two vertical tracks are connected to the lower horizontal track like cayman shen proposed.View attachment 476529
Please consider this image. The previous changes with the gap in the right track (left in this image) might not be correct.
And as I mentioned before; the wide pins seem much wider than in proposed design.
View attachment 476529
Please consider this image. The previous changes with the gap in the right track (left in this image) might not be correct.
And as I mentioned before; the wide pins seem much wider than in proposed design.
Agreed.
I think you may be right about the right track, I did widen the pins in my most recent tweak post #1015. It also looks as though the two vertical tracks are connected to the lower horizontal track like cayman shen proposed.
I think you may be right about the right track, I did widen the pins in my most recent tweak post #1015. It also looks as though the two vertical tracks are connected to the lower horizontal track like cayman shen proposed.