Page 42 of 42 FirstFirst ... 32373839404142
Subscribe
  1. Member Since
    Mar 2016
    Messages
    64
    Mar 12, 2017, 8:51 PM - Re: Nice-N Model Design message to all Studio Scalers! #1026

    I just ordered the Y-wing and just noticed in the instructions I have to order some parts from Plastruct. Is this true ? and what does this mean ???You also need Plastruct tube XXXXXX for the thruster assemblies. Does this mean that some of the parts are the piping and I will have to bend it ?



    In addition, you will need to purchase 8
    1/4” ABS TEE from Plastruct, code number T-8. It is easiest to order two of their 4-packs, catalog code #90086.
    You will also need to puchase butyrate coated wire and butyrate tubing from Plastruct as well. I used the following catalog code tubes/wires: 90101,
    90102, 90103, 90104, 90105. You also need Plastruct tube XXXXXX for the thruster assemblies. I also replaced the torpedo tubes and laser cannons with
    brass tubing - that is optional, and crazy.
  2. Member Since
    Nov 2010
    Messages
    258
    Jul 21, 2017, 5:02 PM - Re: Nice-N Model Design message to all Studio Scalers! #1027

    Does Steve still visit therpf?
    Steve if you do so,..please read your messages and please do get back to me.
    Thanks!
  3. RonH's Avatar
    Member Since
    Mar 2007
    Messages
    19
    Aug 8, 2017, 9:37 PM - Re: Nice-N Model Design message to all Studio Scalers! #1028

    OK, I'm putting this back up and not taking it down until I am compensated. Don't bother begging me again. Don't tell me any more sob stories.

    Neisen stiffs his 3D modelers.
  4. RPF Premium Member swpropmaker's Avatar
    Member Since
    Nov 2001
    Messages
    1,079
    Aug 8, 2017, 10:08 PM - Re: Nice-N Model Design message to all Studio Scalers! #1029

    Hey Ron,

    Like I told you before I ordered the D7 for you. The caster was in the process of a remold and has assured me you will receive one of the first from the new molds. I will check on it for you. I'd totally make one for you but i don't run them. Monsterroomprops will send it once ready.

    Voodoocaster i do not vistit the RPF at all. cept now and then to check I'll check messages and get back to you.
  5. RPF Premium Member swpropmaker's Avatar
    Member Since
    Nov 2001
    Messages
    1,079
    Aug 8, 2017, 10:31 PM - Re: Nice-N Model Design message to all Studio Scalers! #1030

    Ron

    Decided to send you my personal Master Archival Casting of the D7. Dont want you waiting any longer. I have forwarded you the tracking info. Will be dropped off tomorrow.

    Peace
    Click image for larger version. 

Name:	rhCapture.JPG 
Views:	52 
Size:	37.8 KB 
ID:	750337
  6. Member Since
    Nov 2010
    Messages
    258
    Nov 21, 2017, 3:43 PM - Re: Nice-N Model Design message to all Studio Scalers! #1031

    Hi Steve,
    i was wondering if you did get/read my pm!?
    I really would like to start building the at-st.
    Let me know.
    Thanks
  7. Member Since
    Nov 2010
    Messages
    258
    Dec 7, 2017, 3:45 AM - what happened to the sticky thread of the Steve Niesen "IOU"list? #1032

    I noticed the thread of Steve Niesen with the list of members to whch he ownes stuff has been removed.
    I was wondering why!?
    Steve still ownes me Stuff till this day.
    I was on that list and i would appreciated it if that thread stays up till i receive my stuff.
    Maybe the mods can explain what happened?
  8. Fett_Ish's Avatar
    Member Since
    Jan 2010
    From
    Warrenton, Virginia
    Messages
    237
    Dec 7, 2017, 4:03 PM - Re: what happened to the sticky thread of the Steve Niesen "IOU"list? #1033

    I have bought a few things from Steve and he always came through after a bit of haranguing. That being said, I just ordered a TIE advanced from him and one reason was the thread here and my belief that he wouldn't want more people added. I second VooDoos question, especially if folks are still waiting, as well as it being an educational thread for those both new to buying GKs as well as those wanting to sell their creations. Just an aside, personally I think Steve is a nice guy with good intentions, but money is money.
  9. Member Since
    Nov 2010
    Messages
    258
    Dec 8, 2017, 12:59 PM - Re: what happened to the sticky thread of the Steve Niesen "IOU"list? #1034

    Congratulations with your tie advanced kit!,..that is really an awesome model.

    I know Steve will deliver the goods,.i just think it is a bit stange that the thread completely dissapeared knowing that at least i still have to receive some stuff from Steve.
    I really would like to see the thread restored untill everyone on the iou list has received their goods.
    I was under the understanding that this also was the intention/purpose of that thread,. correct me if i am wrong ,.Mods/Steve?
    I really would like to see Steve's reputation restored to what it used to be.
    Putting an end to the iou list would be great for him and for the people still waiting for their paid for goods,.maybe i am the only one left on the list i really can't tell.
    I hope Steve reads this and will send out the goods asap.
  10. RonH's Avatar
    Member Since
    Mar 2007
    Messages
    19
    3 Weeks Ago  Jan 23, 2018, 7:27 PM - Re: what happened to the sticky thread of the Steve Niesen "IOU"list? #1035

    Neisen still owes me quite a bit. After my post in the missing thread, he sent me a kit that had missing parts, no decals, and parts warped from having boxes stacked on top.
    Last edited by RonH; 3 Weeks Ago at 7:35 PM.
  11. Member Since
    Dec 2001
    From
    St. Paul, MN
    Messages
    72
    1 Week Ago  Feb 6, 2018, 1:29 PM - Re: what happened to the sticky thread of the Steve Niesen "IOU"list? #1036

    Voodoocaster and RonH please pm me and let me know what Steve Owes you or what the issues are. I will speak with him.
    Thank You
    Dan
  12. RPF Premium Member swpropmaker's Avatar
    Member Since
    Nov 2001
    Messages
    1,079
    1 Week Ago  Feb 6, 2018, 10:22 PM - Re: Nice-N Model Design message to all Studio Scalers! #1037

    RON H I dont owe you anything. You are a disgruntle little man who has screwed me over. Do you really want to get into the time I supported you buy buying you a computer graphics card?? Paying for a Cell phone so you could do work for me on the BOP which you never delivered AND kept a $500 tuskuda BOP kit! You are so full of lies its stupid. I OWE YOU NOTHING! Voodocaster Mike messaged me last week saying you have been taken care of. is this not the case?
  13. Member Since
    Nov 2010
    Messages
    258
    1 Week Ago  Feb 7, 2018, 3:56 AM - Re: Nice-N Model Design message to all Studio Scalers! #1038

    Steve,..Mike contacted me 2 weeks ago saying that he indeed would take care of the leg set and needed my shipping-adress.
    I did not hear from him since, so i do not know wether he actually did take care of the parts and shipped them out or not.
    I will let you know he moment the set arrives.
  14. RPF Premium Member
    Member Since
    Nov 2006
    Messages
    1,027
    1 Week Ago  Feb 7, 2018, 4:35 PM - Re: Nice-N Model Design message to all Studio Scalers! #1039

    They will be on the way soon, I have to fit these in with my regular work load. Weather is cold and lots of snow days = loss of work days. They are almost done.


    Voodoocaster said: View Post
    Steve,..Mike contacted me 2 weeks ago saying that he indeed would take care of the leg set and needed my shipping-adress.
    I did not hear from him since, so i do not know wether he actually did take care of the parts and shipped them out or not.
    I will let you know he moment the set arrives.

Similar Threads

  1. Replies: 8
    Last Post: Dec 9, 2016, 11:55 AM
  2. Replies: 1
    Last Post: Nov 10, 2007, 3:57 PM
  3. Replies: 38
    Last Post: Sep 12, 2007, 6:21 AM
  4. Where can I get a nice Spinner model??
    trvann, Studio Scale Models
    Replies: 4
    Last Post: Mar 12, 2004, 6:41 AM