So I figured I'd start a seperate thread on my Fullcock Blade Runner squirt gun. What are my plans? It will have working red and green LEDs, a complete paint job, hopefully resin cast amber grips, a removable magazine housing the battery, hinged trigger, and quite possibly sounds and and muzzle flash. Some of this will depend on my budget though.
The first step is taking the gun apart. I started by rocking an Xacto blade back and forth over the pins. I then used a small flat head screwdriver to pry the parts apart. While the grips came off easily, the body was a different story. It was glued really really well, especially around the water chamber. There was some plastic casualties but nothing a modeler can't fix!
The pictures explain the process and show where I currently am. Stay tuned for more updates as progress continues.
And again thanks go out to 829Japan for securing for me this fantastic squirt gun!
The first step is taking the gun apart. I started by rocking an Xacto blade back and forth over the pins. I then used a small flat head screwdriver to pry the parts apart. While the grips came off easily, the body was a different story. It was glued really really well, especially around the water chamber. There was some plastic casualties but nothing a modeler can't fix!
The pictures explain the process and show where I currently am. Stay tuned for more updates as progress continues.
And again thanks go out to 829Japan for securing for me this fantastic squirt gun!
Attachments
Last edited: