NathansPROPS
Active Member
Hello all, A couple of years ago I started painting this Jurassic park Explorer car and now I want to completely redo the paint job. I started cleaning the inside roof with a small bottle of Testors paint thinner and saw that it worked. Though the downside to it was that it created small air bubbles on the inside roof, and melted it a little bit but not too badly. I then applied a small bit to the outside doors on one side of it and it worked but I kept feeling the need to apply more to it for it to completely get rid of the green paint. I stopped because I ran out due to first spilling 3/4ths of the small bottle on my desk. Second reason is because on the doors there are small little door handle details and I don’t want those to be melted away. I also scraped away some of the paint with my finger nail and that works, but I don’t want to have to do that for the whole thing. If it would help for me to list the paints I’ve previously used on this model I will list them.
Krylon Ruddy Brown Primer.
Yellow paint, First painted with yellow wall paint, then with Testors Enamel Yellow- Flat paint. Probably 2x coats in testor paint if I remember correctly.
Green was Painted with Testors sublime green model master spray enamel. Coats maybe 3x again if I remember correctly.
Any advice would be accepted and greatly appreciated!
Thank you for reading my current predicament.
Krylon Ruddy Brown Primer.
Yellow paint, First painted with yellow wall paint, then with Testors Enamel Yellow- Flat paint. Probably 2x coats in testor paint if I remember correctly.
Green was Painted with Testors sublime green model master spray enamel. Coats maybe 3x again if I remember correctly.
Any advice would be accepted and greatly appreciated!
Thank you for reading my current predicament.