Show your custom Lightsabers!

Stealthsaber!

Stealthsaber_1.jpg
Stealthsaber_2.jpg
Stealthsaber_3.jpg
Stealthsaber_4.jpg
 
Yup!

It's funny, I do mot like fully assembled TCSS sabers, but at this point I've gotten enough parts to make a few...
 
I like the Stealthsabre, SethS! I must say I have a soft spot for thin-necked sabres.

I have a couple of sabres I've been working on, I keep meaning to post some pics when I get the chance.
 
Finally got round to posting! This is my first saber, it's a belt hanger made from 32mm (1 1/4") chrome tube, kinda on the skinny side which is why my next one is a 40mm (1 1/2"). Other parts include various hose and pipe connector fittings, an IKEA unit foot and hard drive motor for the emitter, and an oval wardrobe rail fitting for the "clamp" body. Overall, I'm pleased with the way this one has turned out!

20180422_200106541_iOS.jpg
20180528_211707017_iOS.jpg
20180528_211650616_iOS.jpg
20180528_211644552_iOS.jpg
20180528_211636151_iOS.jpg
 
Stormtrooper Lightsaber

This is my first functional Lightsaber build. I guess you could consider it a plumbing Lightsaber as it is made from PVC pipe and a sink drain. It has an LED blade, crystal chamber and an MP3 player. I used a DIYino with some customized programming and custom menu commands. I learned Blender to design the grip and blade plug and had them printed at Shapeways.

Lots of learning and lots of fun.


101_2688a.jpg101_2689a.jpg101_2692a.jpg101_2693a.jpg101_2694a.jpg101_2701a.jpg101_2699a.jpg


Finished and working.

Configuration Menu

Crystal Chamber and MP3 Player
 
Last edited by a moderator:
This is a custom Graflex 2.0 Empire Strikes Back version. Never displayed. Below is a list of every part purchased to create the hilt. I have a Nano Biscotti v4.0, the 2 switches that came with the kit, and a bass speaker on stand by. Electronic components are $75 extra. The 2 switches are included with the hilt because they came with the kit.


I will gladly answer any questions!


Graflex 2.0 kit = $225
Vintage graflex bunny ears = $100
CSS red button thumbscrew ×2 = $30
KR sabers blk/brass blade plug = $13.73
KR sabers slide tab thumbscrew = $13.46
KR sabers beer tab = $7.49
KR sabers emitter screw = $2.49
KR sabers clamp screw = $2.50
Roman Props graflex clamp = $40
Graflex Shop brass contacts = $6
TOTAL = $440.6720180615_164529.jpg20180615_164456.jpg20180615_164448.jpg20180615_164425.jpg20180615_164411.jpg20180615_164358.jpg20180615_164339.jpg20180615_164322.jpg20180615_164307.jpg20180616_175122.jpg
 

Attachments

  • 20180615_164647.jpg
    20180615_164647.jpg
    2.3 MB · Views: 193
  • 20180615_164547.jpg
    20180615_164547.jpg
    705.3 KB · Views: 140
Hey @RonLWhite93 ! It kinda looks like you're selling this kit rather than showing off a custom built lightsaber. Is that the case? Or are you just tallying up an account of what you have into it so far?

If you're selling it, you should post it up in the Junkyard...

https://www.therpf.com/junkyard/

You'll have to become a Premium Member to do so. Here's where you learn how to become one...

https://www.therpf.com/faq.php?faq=community_info#faq_premium_member

If you're not selling it, I look forward to seeing it completed and all lit up! There are some great threads here on The RPF, The Custom Sabershop Forum, and over at FX-Sabers.com if you need help with how to wire up your Nano Biscotti.
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top