I suppose this is the thread to ask in--
I have Parks that's missing a few parts--specifically, one of the two small flathead screws (beneath the shroud) which keep the inner bulb holder in place, and the clamp plastic sleeve. I'm having trouble finding a replacement for the screw, and am not sure where to find them. And, are o-rings currently the best solution for replacing the plastic clamp sleeve?
AAre you talking about these screws ? -
http://img.photobucket.com/albums/v...9-7BCA-4B28-9ED1-3C2879D59C70_zpsozgljpwx.jpg
They're actually dome head screws.
Not sure where to find them but you could check for electronics screws.
Yep, those are the screws.
Anybody got any ideas on what to use to look like these screws but work in the Torx holes when the MPP 2.0s arrive?
I'd like to
accurize an MR LE Vader ESB to look like the hero owned by Prop Store:
1- replace grips
2- replace wires
3- replace bubbles
4- add circuit board
5- clear a space under the bubbles between the sides, as it's now solid
6- add threaded rod to side of clamp where there is nothing now
7- replace knurled knob (does anyone make a replica of this?)
Q: can someone please post the dimensions of the MPP clamp-space?
View attachment 703295
Ok, just sign up on new romans MPP run.
I still don't know what it's based from, but even it's based from a larbel, the result will be much more accurate than a MR LE, and easier to make a real lightsaber from it, without heavy mods as you plan to od!
The larbel clamp is really good and overall shape is good too, some details are wrong, but it's really minimal details.
Wow, there is an interest thread on Romans MPP. Didn't know about that... Can you provide a link? Couldn't find it via Tapatalk.
Enviado de meu Moto G (4) usando Tapatalk
I'd like to
accurize an MR LE Vader ESB to look like the hero owned by Prop Store:
1- replace grips
2- replace wires
3- replace bubbles
4- add circuit board
5- clear a space under the bubbles between the sides, as it's now solid
6- add threaded rod to side of clamp where there is nothing now
7- replace knurled knob (does anyone make a replica of this?)
Q: can someone please post the dimensions of the MPP clamp-space?
View attachment 703295
I would more suggest to use something else than a mr LE, it has quite some value, you can sell it and buy something better (parks, larbel, heiland with wannawanga parts) and make something more accurate.
I just saw Roy's posting regarding his steel shroud replica. Sorry if I missed this, but is the general consensus that the ANH shroud was steel or is it still possible it was aluminum? Have steel shrouds been found on any real MPP's in collectors' hands?