Unlimited Run Willy Wonka inventing room key

[replicaprops]

Here is the link to parts.
CLICK HERE TO ORDER

Here it is in plastic.
Photos courtesy of Alan


Here it is in polished gold steel.
Photos courtesy of Todd




Here are some computer renders



If you have questions please ask.
Rob

 

[Alan Castillo]

Could you add FUD etc & metals options ?

 

[replicaprops]

Could you add FUD etc & metals options ?

Sure, but the spring in fud and metal wont function. I can turn the key handle into multiple parts though so that might allow a external spring to be added.

 

[replicaprops]

I added 3 new parts to the shop section. The key shaft, spring and handle top. This will allow you to print in metal. I also enabled metal in the other parts as well as fud.

 

[replicaprops]

This is shipping now. Place your order at the link provided

 

[RobI]

Ok this may be a stupid question, but with all the parts options, can you specify which ones and of what color I'd need to buy to have as close to accurate as possible? Would be great if it functions, but also if it can be metallic and clean as possible.

 

[replicaprops]

Ok this may be a stupid question, but with all the parts options, can you specify which ones and of what color I'd need to buy to have as close to accurate as possible? Would be great if it functions, but also if it can be metallic and clean as possible.

There are really only 2 options. Metal or plastic. If you go with plastic you can order the all parts in one
https://www.shapeways.com/model/293...y-all-parts.html?li=shop-results&materialId=6

If you want metal then order 1 of each of the other parts in metal. The only thing is the spring will not act as a spring in metal, so if you want the spring to work that will be the only part you will need in plastic.
Color does not matter because they dont offer brass colored plastic, so you are going to paint it anyway.
In metal you can choose the gold colored metals and only have to paint the spring.

I designed the model to function like the real prop, so the handle will drive the gears and turn the keys, and pulling on the handle will lift the center gear to disengage.

 

[replicaprops]

Bump. One member already got his. Waiting on assembly photos from his thread

 

[replicaprops]

Here are some customer supplied photos of the expertly finished prop

Thanks @ Alan Castillo

 

[replicaprops]

Just got confirmation on the first Stainless steel print success. So here is a bump

 

[replicaprops]

Here are the photos of the full metal print. This was done in gold polished steel.
photos supplied by a customer.

 

[replicaprops]

Another photo of the same key polished steel
View attachment 471207

 

[replicaprops]

Bump for those who are interested.

 

[replicaprops]

This is a must have for Wonka fans, here is a bump

 

[CRN31]

Would love to have this in my collection! I started trying to create a 3d model a while back.
How do I order in metal? Thank you!

 

[replicaprops]

Would love to have this in my collection! I started trying to create a 3d model a while back.
How do I order in metal? Thank you!

Here is the link https://www.shapeways.com/shops/replicaprops?section=Willy+Wonka&s=0