What’s on Your Workbench?

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TatooineMachine

Sr Member
RPF PREMIUM MEMBER
We all have stuff on our bench in various stages of “completion”. So what’s on your bench and where’re you at with completing it? Here’s mine -

1. Detention Block Halocam - I have a six Trident viewers, the metal antennas, the metal for the backing plate, the template for the plate started, and the decals & reflective tape. I need the following - make the backing plate, find, buy, or make the 4 Death Star lights, match & paint the viewers, get a small monitor wall bracket, and electronics to illuminate &control the DS lights.

2. Dan Laws Tie Pilot Helmet - I have everything, just need to get the satin black paint completed, clear the black, mask & paint the metallic details, attach the eye lenses, Imperial pulleys, rubber trim, and decals

3. Trooper Chewie Bowcaster - I have the bow, prod, plates, knobs, greeblies, strap, single point scope, and 4 x 20 scopes. I need the barrel, front barrel mount, front sight, back barrel housing, scope mounts, and trigger.....seems so far away!

4. Nabrun Leids - I have the vintage WWII correct gas mask and need to order/commission the mask from Chris Stephens Creations

Things on display but not completely finished -

5. Luke ANH Graflex - I have the Roman‘s saber with Wana Wonga grips, bubble strip, and D ring. I’d like to add electronics - lights and sound

6. Obi ANH Mk1 - I have the Roman’s weathered saber with Spirit of Obi reveal. I’d like to build out the reveal with metal printed pieces& add electronics - lights and sound.

7. Zorg 2-1B Droid - It’s complete with exception of a machined aluminum neck ring I’d like to add to finish him off.

What‘s on your bench to finish?
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Vader2015

Member
Ray's blaster
20200605_221619.jpg
 

Red Hawk

Active Member
RPF PREMIUM MEMBER
Sounds like a familiar workbench, Chad!

- DS Detention Block Camera - have all six viewers and most parts from Phil from the original run, just need to get up the courage to paint them and assemble.

- An APH-6B that I’ve stripped and cleaned and “mid-way” converting into a Red 5 helmet.

- Bowcaster - have mostly the same parts you do (mostly thanks to Jerry!). Unfortunately they’re all sitting nice and safe in a box, pretty far down my build list.

- vintage Graflex, Inc that I’m converting with electronics to TFA configuration. Mock up of the chassis here before install.
94630593-1F0B-42D8-9673-8CEDBC97D11E.jpeg


- Romans Mk1 with Rudy’s CC - have a Verso board and most of Dmitry’s chassis parts, just need to get to work here.
06955C98-E9BE-4039-99AD-832B7D442C40.jpeg


- feels like a lot of other builds in various stages of hunt or too early to even mention. Also going to need a good place to display all these goodies once I can add them to the rest of the collection. Running out of wife-approved space!
 

russellsch

Sr Member
More lightsabers than I want to admit, in varying stages of dismantled/completion.
Bowcaster, pretty much in the same condition as mentioned above.
My Hoth binoculars are almost ready to be assembled.
& even though I said I wasn't going down that rabbit hole.... I'm hunting/collecting parts for a Vader Reveal.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Verity Cosplay

Sr Member
RPF PREMIUM MEMBER
1.) Lukyanov CU custom install
2.) Handmade TFU I Starkiller being made from a cut apart Korbanth 2.5
3.) Romans Balance v4 install
4.) Two Graflexes (one ANH and one non-Canon configuration mashup between various screen configs)
5.) Solo's Hold V2 weathering and stenciling for prep to install
6.) Korbanth CG2
7.) Phoenix Props Kylo V2

and then two upcoming inbound commissions for an Aayla and a Starkiller.
 

clonesix

Sr Member
RPF PREMIUM MEMBER
I have had lots of SLA printed parts to my T-800 show up on my doorstep.
Here I have put together his left foot. There is no glue used here, as all the tolerances fit well and snug. I will disassemble for painting. DA844E49-FBDD-4D79-93CA-39B7D2AE6BF8.jpeg 1E940D03-53B9-4D9B-8ACF-07A13D1DC34A.jpeg
 

Jmeek2004

New Member
I just got this in and when my Wannawaga parts show up I’ll have my dream ANH lightsaber. It’s my first time making one with a real Graflex and I am beyond excited. There is something about a real Graflex that is so amazing. It just feels like a tool that was meant to be Knocked around and made to last forever. 2C3489E0-D32D-4D36-A7CA-88CA86E87244.jpeg AD12A255-748A-4991-A054-7DFE44565881.jpeg
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top