Warhammer 40k terminator

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

AdeptMechanicus

New Member
Hi guys,
This is my finished build of an apothecary Terminator from the game Spacehulk Deathwing. This has been a year and a half in the making and I've had a blast making it. The suit is EVA foam,3d printed bits and all manner of hardware and scrounged goodies. He's about 98% done, I have a few hoses to connect from some of his gear to the back of the arms and from the plasma vials on his hips to the back of his waist.
IMG_20200508_163707186.jpg

IMG_20200508_163717150.jpg

IMG_20200508_163730888.jpg

IMG_20200508_203852404.jpg

The last 1 shows the added on stand and weapon. He stands 7'7" at the top of all his gear. All the lights are simple LED's w/9v batteries and the same for the EL screens in his arm. The drill bit on the end of the Narthecium actually spins and I have a touch pad in the fingertip to run it from a closed fist. This suit is wearable and I've had it on. If you guys have any ?s or comments, I'd love to hear them. Thanx for looking!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

19narvik40

Well-Known Member
By the Emperor !!!!! This looks absolutely brilliant !!!! Fantastic job sir and of my favourite chapter no less. Can't wait to see photos of you wearing it.

The Emperor Protects
 

AdeptMechanicus

New Member
By the Emperor !!!!! This looks absolutely brilliant !!!! Fantastic job sir and of my favourite chapter no less. Can't wait to see photos of you wearing it.

The Emperor Protects
Thanx! I appreciate it. To get this suit on I'll need a couple of servitors to help! It has to go on in pieces. The upper body is the biggest problem.
 

AdeptMechanicus

New Member
Here's a couple WIP pics of his weapon
IMG_20200401_205813608.jpg

IMG_20200401_205942839.jpg

IMG_20200401_210021006.jpg

IMG_20200401_205912830.jpg

The pistol is about 22" long and about 14" tall. I used 2" thick urethane foam, mattboard and Eva foam for the base structure. The lion's head was 3d printed and bondo'ed into the hand grip. The magazine was made from scrap filament spools. For as big as it is, it weighs maybe 3-4lbs. I have quite a few other weapons made in anybody's interested. Thanx for looking.
 

AdeptMechanicus

New Member
Here's some better pics of the shoulder pauldron details, but on the paint rack
IMG_20200121_195104847.jpg
IMG_20200121_195119444.jpg
IMG_20200121_195134518.jpg

IMG_20200106_203758433.jpg

IMG_20200106_203845149.jpg
IMG_20200106_203906915.jpg

The small shield is different also, I made several that I liked. They're interchangeable by a wing nut and 3d printed mount plate in the pauldron itself
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

AdeptMechanicus

New Member
Here's some more goodies from the arsenal
IMG_20200122_202316535.jpg
IMG_20200122_202635999.jpg
IMG_20200122_202527409.jpg
IMG_20200122_202916351.jpg
IMG_20191224_195642371.jpg

These are Lightning claws for the uninitiated. They're ridiculously huge! Almost 40" long from the cuff to tip of the longest blade. All made of EVA foam and polyurethane foam fingers that were hand carved. They weigh in at about 4 lbs. Thanx for looking...
 

Callianis

New Member
It's a work of art! :) I make wax seals and Bolters but this is a massive project you've executed wonderfully :)
 

AdeptMechanicus

New Member
Thanx for the kind words. There are things I'll do different on the next 1, but I'm happy with how this armor turned out. Start a thread and post some of your work, I'm sure people would like to see it
 

AdeptMechanicus

New Member
Here are some pics of the 1st thing that I made before I started on the armor
IMG_20181104_170104563.jpg
IMG_20181104_170112950.jpg
IMG_20181104_170134944.jpg
IMG_20181104_170226120.jpg
IMG_20181104_170347040.jpg

It's made of all different sizes of card board tube, urethane foam, Luan, a broomstick and heavy card stock. I think there's a chunk of a hockey stick too. The barrels spin free but not motorized. It's just under 53" long LOL. I tried to keep it as light as possible, but it's a tad front heavy from the grip position. I've taken this thing to a couple hobby stores and a crowd gathers kinda quick!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

AdeptMechanicus

New Member
Here's another from the armory. This is a chaplains weapon called Crozius Arcanum. It brings religion to the heathens Lol. It's made of foam, Luan, electrical PVC pipe, 3d printed bits and a couch foot.
IMG_20200517_202134467.jpg
IMG_20200517_202159242.jpg
IMG_20200517_202218495.jpg
IMG_20200517_202338796.jpg
IMG_20200517_202410111.jpg
IMG_20200517_202439348.jpg
IMG_20200517_202500219.jpg

This measures 44" long and 19" wide, weighing in at 4- 4 1/2lbs. Now this is not an apothecary's weapon, but I had to make it just out of pure cool factor. Maybe there's a chaplains suit waiting to get made. Enjoy
Small update pic. I had a purity ribbon that I was waiting for. Here it is
IMG_20200522_191207965.jpg

IMG_20200522_191244443.jpg

IMG_20200522_191219547.jpg

IMG_20200522_191226970.jpg
 
Last edited:

Dart

Well-Known Member
RPF PREMIUM MEMBER
Holy Shnikes! You're blowing my mind, here. Love it all, nice work!
 

AdeptMechanicus

New Member
Holy Shnikes! You're blowing my mind, here. Love it all, nice work!
Thanx for the reply. The scale of these weapons in the lore is over the top redicculous as is everything else. To try and do them justice is a balancing act between accuracy and real world "can I lift it". That's the fun!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TheForgeProps

New Member
Amazing work! Making over the top weapons is great fun, one of my favourite builds was a gatling assault rifle from Borderlands 2.
 

AdeptMechanicus

New Member
Amazing work! Making over the top weapons is great fun, one of my favourite builds was a gatling assault rifle from Borderlands 2.
Yeah, it's a blast. I have 3 more melee weapons finished that need paint. Am also working on a "storm shield" atm. And have plans for 2 more, I just have build them. Not enough hours in the day or enough arms. I need Dr. Octo's help Lol
IMG_20200513_154429101.jpg
IMG_20200514_191100020.jpg
IMG_20190925_185700466.jpg

The axe is about 40" long, the shield and mace about 48" and the powered katana about 60". All electrical. PVC and foam with various 3d printed pommels and handle trim. Here's 1 more of the back side of the shield atm
IMG_20200516_203009359.jpg
 

TheSpaceMongol

New Member
This is just excellent! I love the paintjob, it's subtle and gives a nice realistic flare to the suit. I've always liked 40K things that look a bit more "real" than the minis themselves. All those weapons look great too. Do you have any photos of the backpack of the suit or the backside in general?

P.S. Since you seem to like terminators, maybe you'll like this piece I made some time ago: Warhammer 40K Terminator Cross-Section by PenUser on DeviantArt
 

AdeptMechanicus

New Member
This is just excellent! I love the paintjob, it's subtle and gives a nice realistic flare to the suit. I've always liked 40K things that look a bit more "real" than the minis themselves. All those weapons look great too. Do you have any photos of the backpack of the suit or the backside in general?

P.S. Since you seem to like terminators, maybe you'll like this piece I made some time ago: Warhammer 40K Terminator Cross-Section by PenUser on DeviantArt
That drawing was you? I have this stashed in a reference pic folder, haha. Here's some of the back of the torso and the waist with armor plate

IMG_20200221_201907872.jpg



IMG_20200209_171856860.jpg


This is the diaper without rear plate and with
IMG_20200409_204726763.jpg

IMG_20200409_204750249.jpg

IMG_20200410_132411430.jpg

IMG_20200410_132238860.jpg

IMG_20200410_132205386.jpg

Hope you like. I forgot to add, the 4 ports above the rear armor plate are where the hoses from the plasma containers on his hip armor plug into. I have the hoses, but need to get some more fittings. Also, on the belt buckle you can see a bent wire rod. This is for interchangeable buckles with adornments. I think I've got 4 versions.
 
Last edited:

AdeptMechanicus

New Member
Grabbed some quick pics of the aforementioned belt buckles
IMG_20200522_163052268.jpg

This 1 is just a closer pic of the original post
IMG_20200522_162729409.jpg

IMG_20200522_162620531.jpg

IMG_20200522_162930569.jpg

This last 1 has a long tabard that starts at his neck on the left side. It drapes across his chest and gets tucked behind the buckle and hangs down a little past his knees. This has yet to be made, but should be pretty cool when it's finished. I have sketches and some ref. pics but no materials yet
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top