I've decided to name this prop the base pair resequencer, as it was never officially named in the series and it was better than "blue and silver box prop"!
bse pair resequencer kit views_zps3gtk1nbx by JamieThomas28, on Flickr
I'm offering a kit of this piece which will comprise of:
- 1x 3D printed emitter rod section
- 1x 3D printed body box with pre-modeled brass insert recesses
- 1x 3D printed battery access panel with pre-modeled conical rods and screw hole recess
- 1x clear emitter piece
- 2x brass inserts
- 2x screws
- 2x resin cast P2 10 turns for the side to be glued on
The kit is $170 plus worldwide tracked shipping of $21.50.
Please post here if you would like to buy a kit.
Looking for at least 5 members interested to get this kit produced.
Ideally I would like to get all the 3D printing done for the various kits in one go to save on multiple shipping charges, and will try and get at least 5 seriously interested members per kit to make this happen.
I'm offering a kit of this piece which will comprise of:
- 1x 3D printed emitter rod section
- 1x 3D printed body box with pre-modeled brass insert recesses
- 1x 3D printed battery access panel with pre-modeled conical rods and screw hole recess
- 1x clear emitter piece
- 2x brass inserts
- 2x screws
- 2x resin cast P2 10 turns for the side to be glued on
The kit is $170 plus worldwide tracked shipping of $21.50.
Please post here if you would like to buy a kit.
Looking for at least 5 members interested to get this kit produced.
Ideally I would like to get all the 3D printing done for the various kits in one go to save on multiple shipping charges, and will try and get at least 5 seriously interested members per kit to make this happen.
Last edited:
