BrotherWilliam
Well-Known Member
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Dropped you a PM. Cheers.
Dropped you a PM. Cheers.
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Open Run
- Thread starter darkside501st
- Start date
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
I got your PM and responded.
I got your PM and responded.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Still working on all the finger cots experimenting with different rubber and silicone and now redesigning the gloves to be even better so stay tuned.
Still working on all the finger cots experimenting with different rubber and silicone and now redesigning the gloves to be even better so stay tuned.
Sentry02
Active Member
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
I know you're not ready to sell them yet, but just so that I make sure I put the info in this thread I am interested in a full right arm gauntlet and repulsor kit when you get them finished. I'll be watching the thread.
I know you're not ready to sell them yet, but just so that I make sure I put the info in this thread I am interested in a full right arm gauntlet and repulsor kit when you get them finished. I'll be watching the thread.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Just a little update for you guys. I just got the 3D printed Mk XLII forearm parts. I will be finishing those off and making molds. Also, I will be getting the upper arm parts for the Mk XLII as well.
Also, here is a little video of the new finger parts.They are not attached to each other... it is just a mock up test fitting:
Just a little update for you guys. I just got the 3D printed Mk XLII forearm parts. I will be finishing those off and making molds. Also, I will be getting the upper arm parts for the Mk XLII as well.
Also, here is a little video of the new finger parts.They are not attached to each other... it is just a mock up test fitting:
Last edited:
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
I am looking at having a small, medium, and large available.
I am looking at having a small, medium, and large available.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Awesome. Looking forward to see the size chart when everything is ready
Awesome. Looking forward to see the size chart when everything is ready
Transhuman325
Active Member
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
DEFINITELY interested in MK XLII arms! Put me down for a pair please!
DEFINITELY interested in MK XLII arms! Put me down for a pair please!
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
The hand plate is the part of the gauntlet that covers the back of the hand and bridges the wrist section. it goes over top of the back of the hand and on top of the gauntlet. Send me a PM with your request and I can send you a photo.
The hand plate is the part of the gauntlet that covers the back of the hand and bridges the wrist section. it goes over top of the back of the hand and on top of the gauntlet. Send me a PM with your request and I can send you a photo.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
All my pictures got messed up when I accidentally cut the files out of my onedrive. When I put them back in they all acted as new uploads and so all the links are different. Videos still work fine.
All my pictures got messed up when I accidentally cut the files out of my onedrive. When I put them back in they all acted as new uploads and so all the links are different. Videos still work fine.
BrotherWilliam
Well-Known Member
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Any word on the second run?
Any word on the second run?
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Halloween season was very busy and I didn't have time to make new molds. I am working on them now and hoping to be done by the end of the month.
Halloween season was very busy and I didn't have time to make new molds. I am working on them now and hoping to be done by the end of the month.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
Yes, however, I am in the process of making new molds and the Halloween rush slowed that down. After I get out a couple more custom orders then I can continue the mold making and will be offering these again soon with even better and more detailed casts.
Yes, however, I am in the process of making new molds and the Halloween rush slowed that down. After I get out a couple more custom orders then I can continue the mold making and will be offering these again soon with even better and more detailed casts.
Re: Tony Stark/Iron Man/War Machine Gloves/Gauntlets - Second Run TBA
I had made a Mk III gauntlet for a client that was waiting on the repulsors to come out. He needed to cancel the purchase do to personal reasons so I have a fully painted and assembled Mk III right handed gauntlet for sale. I will be posting it in the Junkyard soon. Many of you have seen my work so if you want to grab it for yourself then the early bird gets the worm. As always I sell my painted and assembled gauntlets for $425 plus shipping. Priority shipping in the USA should be around $12-15 and international shipping will be $35. I will also through in a simple LED light for the repulsor ($25 value). Let me know if you want to snag this deal. It might be the only gauntlet I have available for a while. I am still working on everything else but there were some issues with the 3D printer which has caused some delays.
I need to take pictures of this particular gauntlet but here are some images of another Mk III gauntlet I made.
I had made a Mk III gauntlet for a client that was waiting on the repulsors to come out. He needed to cancel the purchase do to personal reasons so I have a fully painted and assembled Mk III right handed gauntlet for sale. I will be posting it in the Junkyard soon. Many of you have seen my work so if you want to grab it for yourself then the early bird gets the worm. As always I sell my painted and assembled gauntlets for $425 plus shipping. Priority shipping in the USA should be around $12-15 and international shipping will be $35. I will also through in a simple LED light for the repulsor ($25 value). Let me know if you want to snag this deal. It might be the only gauntlet I have available for a while. I am still working on everything else but there were some issues with the 3D printer which has caused some delays.
I need to take pictures of this particular gauntlet but here are some images of another Mk III gauntlet I made.
Similar threads
