The Last Jedi new prop picture SPOILER SPOILER SPOILER SPOILER

Discussion in 'Star Wars Costumes and Props' started by rockbottom, Dec 14, 2017.

  1. rockbottom

    rockbottom Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
  2. PropReplicator2

    PropReplicator2 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,731
    Ahhhhhhhhhhhhhhh!!!!!! :D

    Sent from my XT1097 using Tapatalk
     
  3. omnicloud7

    omnicloud7 New Member

    Trophy Points:
    3
    That scene gave me the chills. Seeing the Hero up close for the first time in decades was a treat.
     
    PropReplicator2 likes this.
  4. 13doctorwho

    13doctorwho Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,626
    Awesome!!!!!!!! Glad to see Luke's lightsaber made it into the movie!
     
  5. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    that looks like the hero but did you see the face of the emitter? It was the new one with holes . Anikan Starkiller already made and released a run, and roman is doing one now.
     
  6. kirova

    kirova Active Member

    Trophy Points:
    262
    don't forget Kylo's padawan saber too

    also, did anyone thought Kylo's three prong saber looked brand new in TLJ? (specifically, in the throne room scene where it was laying on the floor) pretty sure it was weathered and worn in TFA.
     
    PropReplicator2 likes this.
  7. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    was that a graflex? It was so quick and to be honest, I was fixated on Lukes saber.
     
  8. kirova

    kirova Active Member

    Trophy Points:
    262
    the emitter didn't get any screen time :( (or maybe I missed it)

    looked more like a prequel generic "clan" saber to me. iirc it was a thick long silver color tube and didn't even have any grips.
     
    Last edited: Dec 14, 2017
    PropReplicator2 likes this.
  9. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    It was quick but it was there. Remember there were two separate scenes from the luke, kylo battle. The first being Kylo's version to rey, the second from luke to rey. It was shown in Kylo's version and clear as day. Also, the color under the emitter was brown for sure. This was a big debate after anikan starkillers run came out and we were all working on them.
     
  10. rockbottom

    rockbottom Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    Kylos saber was his current without the black paint, red wire, cutout and the side emitters. Or at least that’s what it looked like.

    And Lukes emitter has the holes as well.
     
    MakBzh and PropReplicator2 like this.
  11. Kylash

    Kylash Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,890
    insaw the face of the emitter in one shot, you could see the holes, it looks just like the TFA saber we saw.

    Kylos apprentice saber looked like his current one but all silver and without the side vents.
     
    Kenzie C01 likes this.
  12. joshvanrad

    joshvanrad Sr Member

    Trophy Points:
    1,991
    Sent from my SM-G935V using Tapatalk
     
  13. kirova

    kirova Active Member

    Trophy Points:
    262
    thx I thought Kylo's padawan saber looked familiar, being the silver version of his current makes sense :)
     
  14. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    Luke’s saber is the same saber we saw in the behind the armory

    We get a real clear shot of the top of the control box. The circuit card is engraved




    Sent from my iPhone using Tapatalk
     
    SpeedRacerx and roygilsing like this.
  15. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    As for kylo’s Palawan saber, I don’t think it’s a cross guard. But it sure does have the same kind of body style as the cross guard, and when I say body style I mean the grooves, and rectangle sections, and even pommel

    Kylos crossguard in this movie was made buy a new prop department. She’s weathered in TLJ, but not as much as TFA

    TFA has a copper/brass under coat, with a black gun blue sheen . Seems like TLJ cross guard is a flat black, with very light weathered

    Only reason it’s different it because a new team made them


    Sent from my iPhone using Tapatalk
     
    SethS and Kenzie C01 like this.
  16. accidental

    accidental New Member

    Trophy Points:
    17
    Yep, definitely the saber from the TFA behind the scenes video, you can clearly see the emitter in the movie and there are some really nice close-up shots of it.
     
    halliwax likes this.
  17. rockbottom

    rockbottom Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    Here’s the Kylo saber

    0D1754F8-EF84-4332-A112-BD3441DE185A.jpeg
     
    elmo274, andrew25rs, Kylash and 3 others like this.
  18. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    That’s a * good pic! Even the compass is in it, i don’t know why I am so in love with that compass but I am


    Sent from my iPhone using Tapatalk
     
    Sundowner and andrew25rs like this.
  19. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    Looks to be the same saber, with out the crossguard, I like it
     
  20. Kenzie C01

    Kenzie C01 Active Member

    Trophy Points:
    262
    Anyone steal a shot of his new saber when it was spinning in that closeup?


    Sent from my iPhone using Tapatalk
     
  21. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    Who’s new saber? What spin close up?
     
  22. rockbottom

    rockbottom Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    I think he means the new Kylo prop, not new saber. There’s a shot of it spinning on the floor during that scene with him and Rey/Snoke.
     
    Kenzie C01 likes this.
  23. tubachris85x

    tubachris85x Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    2,465
    Yea, didn't notice that originally, but that would make sense now that he modified his padawan hilt to be the cross guard style, probably bleeding the crystal and creating the instability of the blade as a result of it all.
     
  24. Kylash

    Kylash Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,890
  25. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    Yes yes!!! Good call I remember that now!! That’s where u can see the paint job really well

    The greeblies inside are super shiny, and it’s a really flat black now
     
    Kenzie C01 likes this.
  26. accidental

    accidental New Member

    Trophy Points:
    17
    Here's another one:

    screen.png
     
    PropReplicator2 likes this.
  27. Jedi Reali

    Jedi Reali Sr Member

    Trophy Points:
    1,210
    Gotta say, I really don't like the Luke saber in TLJ. It just looked like a slightly off hero replica, and it got a huge extended close up too. It looked brand spankin new, maybe that was the problem. I did think it was cool to see Ben Solo's saber, no matter what it looked like. But I like that it's simply an early, uncorrupted version of the Kylo saber.
     
  28. Guff

    Guff Active Member

    Trophy Points:
    361
    kylopadawan.jpg kylopadawan2.jpg

    Kylo's saber. But what's that leaning on it? A paintbrush? Or was Kylo learning to become a wizard too?
     
  29. Kenzie C01

    Kenzie C01 Active Member

    Trophy Points:
    262
    What he said


    Sent from my iPhone using Tapatalk
     
  30. Kylash

    Kylash Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,890
    It looks like some ort of sundial in front of it.
     
    Kenzie C01 likes this.
  31. Rymo

    Rymo Well-Known Member

    Trophy Points:
    635
    Here is a brightened version:
    screen.png
     
    SethS likes this.
  32. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    Thanks for the screen grabs guys!


    Sent from my iPhone using Tapatalk
     
  33. Anakin Starkiller

    Anakin Starkiller Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,265
    From what I'm seeing, I think I got pretty close with my tfa run :)
     
    Sundowner, Jediscum, Mark P and 6 others like this.
  34. SethS

    SethS Master Member

    Trophy Points:
    2,691
    Well I was right... and wrong about Luke and using the green lightsaber. :)

    Dan, do you have any extra control boxed from your TFA run left? I made mine into a V2 thinking it was the only chance I had. Now I kinda want to hero it up to get your new V2... also... how will I fill in the holes I made...
     
    halliwax and PropReplicator2 like this.
  35. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    you most certainly did! Also, remember back to when we were finishing these, there were debates about the brown. It sure looked brown to me.

    - - - Updated - - -

    I have used JB weld as a filler before. It works well
     
    halliwax and SethS like this.
  36. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    JB weld is great like kevin said. you could also use alumaloy, i believe home depot even sells it now. pretty easy to use and should match the color of the aluminum pretty close. youtube has some great how-to's on it. pretty simple

    i just got in from the second viewing, kylo's cross guard is SUPER clean in this film. i took note on the spin on the floor scene, * it looks brand new. even the brass belt clip is spotless
     
  37. Kylash

    Kylash Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,890
    Yeah it’s like he refinished it after Rey messed it up. It lost a lot of character.
     
  38. Mark P

    Mark P Active Member RPF PREMIUM MEMBER

    Trophy Points:
    362
    Well it took a pretty good hit in TFA so it makes sense he had to do some major repair work.
     
    ThatSpoiler likes this.
  39. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    Well, now we have a TFA Kylo and a TLJ Kylo saber. I guess it's fitting if you go off Lukes changing sabers along with Vaders.


    Not to mention the broken Rey's saber. And the smashed Kylo helmet This will be a run for sure.


    Save your money people. Of course there will be a new run coming soon
     
  40. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    I remember rumors of a company here in the states releasing 1:1 Props from TLJ... one was kylos smashed helmet pieces

    Still haven’t heard or seen anything in months so I don’t know if this is true....
     
  41. Collectorchris

    Collectorchris Active Member

    Trophy Points:
    362
    Does anyone have a picture(s) of the saber Rey is holding at the end of the movie/the one seen during a certain sequence being struggled over??? The best way I can try to non spoiler describe it.
     
  42. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    I'm guessing you can just take a resin graflex and mod it to match the broken graflex. It would be a shame to see real graflex flash guns mangled
     
  43. Collectorchris

    Collectorchris Active Member

    Trophy Points:
    362
    I was planning to use a 3D printed one for this. Possibly a replica if I can get one cheap enough.
     
  44. Anakin Starkiller

    Anakin Starkiller Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,265
    I dont have extra control boxes. Didnt you keep yours?

    As to the holes. You might get away with filling them with solder. Stuff some wire in the holes, then hit it with a blow torch. Then sand
     
    SethS likes this.
  45. Title

    Title Active Member

    Trophy Points:
    361
    Here's a blurry image I found

    utN9ifw.png
     
    karmajay likes this.
  46. Fanofstarwars

    Fanofstarwars Active Member

    Trophy Points:
    242

    Based of the picture it seems the saber split at an angle. The clamp is facing us due to how daisy is holding it
     
  47. Collectorchris

    Collectorchris Active Member

    Trophy Points:
    362
    Thank you for the great image. I have a 3D printed one on the way from Kassi at kassaraptorcosplay on Etsy. I think this petticoat 3D printed will work great because of the way it assembles. Should be easy to add a crystal.
     
  48. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    Might as well begin speculation on Rey's new saber. Will she repair the graflex or start over? Or will she return the the island and find lukes TFA bonus saber.
     
  49. halliwax

    halliwax Master Member RPF PREMIUM MEMBER

    Trophy Points:
    4,386
    You know kevin, I don’t want to come off as a jerk.. but after what the last Jedi delivered... I don’t care where this saga goes... :(
     
  50. kevin926

    kevin926 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,782
    They're just new chapters is all. Not sure where they are taking it. The way I see it, there nothing they can do that will take anything away from the OT. My kids enjoy it but that's all they really know. I'm still a purist when it comes down to it. All of my props are from the OT with a couple of small pieces as back drops from the other films. It's all in good fun. You are never considered a jerk from my point of view.
     
    SpeedRacerx, Mark P and halliwax like this.

Share This Page