The Batman costume research and found parts ID

NZ17

Member
Hinge system?!? Lets see some pictures
This is part of the Instagram post where it is talked about.

278865270_1010744076219356_6757921823892258898_n.jpg
 

NZ17

Member
I seem to have discovered something about the chest. I believe that the hinges are at the top left and right sections where the shoulder straps are. Below is a closeup of the side of the chest plate, as well as a picture of a set of painted props by Rut Villamagna. I think that the emblem pieces on the chest are actually in 4 unassembled pieces instead of 2. The emblem quarters with the blade edge are on the chest sections with the shoulder straps, and those chest sections move relative to the main chest piece.

. 274842290_765764254812406_5853311488571882370_n.jpg 278664933_745368613278447_3553331423681658827_n.jpg
 

Johnny Bats

New Member
Anybody knows how they darken the color of the inside of his bomber jacket?
View attachment 1571453

Mine looks like this.

View attachment 1571459
Not sure how they did, but this is just a thought on how you could do it, as I haven't tried it yet. But maybe watered down shoe polish kind of dabbed or painted or worked over the surface (sponge, paper towels, etc)? I was thinking about fading/weathering the inside of mine somehow as well, and thought of how I weathered my chest/ab armor. It gives it such a cool worn in look, but I haven't tested it on that type of polyester material. It should work, in theory, so long as you don't drench it, I'd say.
 
Last edited:

Bloodmike1

Active Member
RPF PREMIUM MEMBER

Attachments

  • 8F7A5D0C-2650-4836-B864-8F2E20F6557D.jpeg
    8F7A5D0C-2650-4836-B864-8F2E20F6557D.jpeg
    1.2 MB · Views: 67

jacksonb14

New Member
Hey guys, does anyone have experience with filling in bat cowl ears to make them sturdy? I have a great battinson cowl but the ears are just a little flimsy, thank you!
 

dmlowery

New Member
Does anyone know the dimentions for the Grapnel gun? This model needs to be scailed
I was thinking of buying that model as well, it'll do for the cosplay I'm working on. Yesterday I went to Target and stopped in the toy aisle to look at The Batman stuff and all of the figures there have the grapple gun on both wrists. I guess this makes sense to enable him to swing using both arms. Can anyone confirm he has two grapple guns?
 

batfan10

Sr Member
I was thinking of buying that model as well, it'll do for the cosplay I'm working on. Yesterday I went to Target and stopped in the toy aisle to look at The Batman stuff and all of the figures there have the grapple gun on both wrists. I guess this makes sense to enable him to swing using both arms. Can anyone confirm he has two grapple guns?

He does infact have two (0:19)

I ended up going for this model
 

NZ17

Member
Blaidon Props posted some more details of his work on the cowls.
 

Attachments

  • 283277029_713154796471807_7869416071673844955_n.jpg
    283277029_713154796471807_7869416071673844955_n.jpg
    159 KB · Views: 119
  • 283122021_5132327546845049_8284201020915929334_n.jpg
    283122021_5132327546845049_8284201020915929334_n.jpg
    121 KB · Views: 119
  • 05-23-22 Blaidon Props.png
    05-23-22 Blaidon Props.png
    500.3 KB · Views: 114

NZ17

Member
I seem to have discovered something about the chest. I believe that the hinges are at the top left and right sections where the shoulder straps are. Below is a closeup of the side of the chest plate, as well as a picture of a set of painted props by Rut Villamagna. I think that the emblem pieces on the chest are actually in 4 unassembled pieces instead of 2. The emblem quarters with the blade edge are on the chest sections with the shoulder straps, and those chest sections move relative to the main chest piece.

. View attachment 1570520 View attachment 1570522
Rut Villamagna posted another picture of her work on the chest piece. Here, you can see the moveable section of the chest I highlighted in the previous post before it is attached to the middle section of the chest.

283736970_1005393116795654_4454961325453882902_n.jpg
 

NKenway13

New Member
Firstly; I was wondering if anyone else had trouble getting into the facebook group? My request has been pending for quite some time:// Edit: Just got accepted; wonderful page!!!!
Secondly; these small double pouches house the two small tubes; one houses the earphone holder; and the other houses the data cards for his contact lenses
BC731979-7997-4EB3-AF63-ED360E936896.png
37DF71F0-C6E3-44C3-92C1-BEDE12A63C62.png

And lastly; does anyone have a line on the flare tube and UV light gadgets? I already found a fantastic 3D file of the adrenaline syringe; just been having trouble tracking down anyone making the other gadgets
 
Last edited:

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top