The Amazing Spider-man 2 - 3D Print Files/Pattern - FREE

I went to scale the file using RaidenTyler's scale tutorial. But I realized that the file he's using to scale comes down to a point on the belt unlike the roundedness of the asm2 suit. Any ideas on how to compensate for the difference?
 
BUBBENSTEIN said:
I went to scale the file using RaidenTyler's scale tutorial. But I realized that the file he's using to scale comes down to a point on the belt unlike the roundedness of the asm2 suit. Any ideas on how to compensate for the difference?
Click to expand...
Instead of using the belt point, line up the points to each side. The top of the legs each have a V dip in the pattern. Hopefully you understand what I'm talking about.
 
IronHabs said:
If you wanna eat some chips, play accordion or maybe play in someone nose, it could be a good thing to have zipper on wrist like that...
I'll use them to play guitar and to go to the peepee room..
For the crotch i use a single horizontal zipper as the pattern wasnt make to cut it along the bikini... God my english is bad!!!!
Lunaman thanks for all ur explanation!
Click to expand...

IronHabs, is it possible to a short horizontal zipper around 5inches in front for convenience to pee-pee room?

Why not diagonal bikini line zipper. It could work I guess. or dual bikini zipper.
 
ccyclon said:
IronHabs, is it possible to a short horizontal zipper around 5inches in front for convenience to pee-pee room?

Why not diagonal bikini line zipper. It could work I guess. or dual bikini zipper.
Click to expand...

Didnt try it but i think it will alter the pattern.. u need an extra "crotch piece" if u wanna do that.. this is why i did horizontal and it works fine.. on my next one ill do the dual way
 
Ironically, the Amazing Spider-man 2 is the only film that DIDN'T use a U-zip, but since most people making patterns (kenlandrum included) are still using the pelting layout that was based on a scan from the pattern used the second Raimi movie, the pieces of the suits are still set-up to be most easily accomodated by a U-zip. The ASM2 pelting pattern requires separated shirt and pants sections, as they had fully separating zipper around the waist and a lower back zip that formed sort of a T.

[/QUOTE]

Hi Lunaman,
Does the lower back zip upwards or downward to suit up?
 
IronHabs said:
Didnt try it but i think it will alter the pattern.. u need an extra "crotch piece" if u wanna do that.. this is why i did horizontal and it works fine.. on my next one ill do the dual way
Click to expand...

I would copy/paste the whole crotch and place it under the pattern. Or somewhwre in it. When u sew the suit u just cut out the crotch area and install the other one with zippers.



Sent from my iPhone using Tapatalk
 
IronHabs said:
Didnt try it but i think it will alter the pattern.. u need an extra "crotch piece" if u wanna do that.. this is why i did horizontal and it works fine.. on my next one ill do the dual way
Click to expand...

IronHabs, what do u mean by an extra "crotch piece"?

What is the length of your horizontal zipper?

Here is a pic of a bikini line zipper which is hidden by the black lines. spider dual zip.jpeg
 
ccyclon said:
IronHabs, what do u mean by an extra "crotch piece"?

What is the length of your horizontal zipper?

Here is a pic of a bikini line zipper which is hidden by the black lines.View attachment 342114
Click to expand...

I would copy/paste the whole crotch and place it under the pattern. Or somewhwre in it. When u sew the suit u just cut out the crotch area and install the copy one with zippers.

Then u get the result like on the pic u posted.


Sent from my iPhone using Tapatalk
 
RINZLERTRON said:
does anyone know how accurate the front and back 3d printed spider decals are in size?
Click to expand...

My new revised pattern will be available soon. Aside from the colors, the main design changes will be the new front spider with longer top arms that lay on the webbing better and more accurately, and slightly thinner webbing.

Will release as soon as test print comes back from FOD.

new spider.jpg
 
You're like the Energizer Bunny of free patterns...you just keep going!

I'd be interested to see how the colors are printing on your latest pattern. Can't wait to see the test print.

-Nick
 
kenlandrum said:
My new revised pattern will be available soon. Aside from the colors, the main design changes will be the new front spider with longer top arms that lay on the webbing better and more accurately, and slightly thinner webbing.

Will release as soon as test print comes back from FOD.

View attachment 342115
Click to expand...


I changed the red and the blue a little bit so it doesn't look dark, I'll print it today, I'll post pics as soon as they have it
 
Be careful resizing that far down. The human body does not scale linearly so the feet, hands, and head may be too tight to use. If possible I'd trace those areas onto some scrap Lycra and sew it up quickly to make sure it'll fit before you spend good money getting it dye subbed.

-Nick
 
Personally i didnt scale the single mask at all from the kens file.. here is what it looks like
Sorry for the crappy pics.. cellphone picture.. and i know the mask is off a bit.. need lil adjustment.20140626_155916.jpg
Its a budget faceshell modified by me from tjack
 
Last edited:
You must log in or register to reply here.

Similar threads

Colby8128
Spider-Man Dark Suit PS4
Replies
3
Views
1,056
Colby8128
Colby8128
aleix666
LOTR Rings of Power Free FONTS
Replies
1
Views
1,087
JediG60racer
JediG60racer
100KS
WHAT URETHANE FOR TOBEY SPIDER-MAN MASK?
Replies
1
Views
1,159
Starganderfish
Starganderfish
Ogibendogy
Studio Scale Kit Donors Matrix
Replies
10
Views
1,348
Rulebreaker
Rulebreaker
LeoCor Replicas
3D-Printed X-Files Pilot Alien Implant
Replies
0
Views
725
LeoCor Replicas
LeoCor Replicas
Back
Top