Aron Wohlfart
Sr Member
The bricks are printed on it. But i am thinking cuz of puff painting the blue. I will see how the metallic blue will look.
Sent from my iPhone using Tapatalk
The Amazing Spider-man 2 - 3D Print Files/Pattern - FREE
- Thread starter kenlandrum
- Start date
The bricks are printed on it. But i am thinking cuz of puff painting the blue. I will see how the metallic blue will look.
Sent from my iPhone using Tapatalk
kenlandrum
Sr Member
I was once again contacted by FOD and they asked if I were interested in setting up a mini-site to link my pattern to their printing services. Deal is, for every 10 prints they do when folks use the special link to their site I will receive a freebie. It looks like you would pay FOD and then upload whatever file you like... it's not like you are tied to one specific pattern file.
Anyway, I would get a credit for every time you use their service. I accepted, and they are working on the site (along with their own as they said they are doing an update as well)
This won't change anything other than the way you would get to the FOD web-site. I will still have the files posted here and you can still print them anywhere you like... I just ask that if you decide to use FOD, please use the link I will provide soon. I realize it might be several days before they get it together, so if you are in a hurry to print, go for it.... this is just something I thought I would mention for future ref.... Stay tuned.
ANYWAY....
This morning I am preparing a revised .psd (still RGB) and a .jpg in CMYK with the cut lines on (VERY faintly) in hopes this might help some of you without photoshop.
It is still the std. 27" from mid face to belt bottom. Please resize as you see fit.
Some of the changes are:
I fixed a tiny web detail on the left neck on both psd and jpg.
I turned the muscle shading OFF on the psd and adjusted the colors accordingly on both psd and jpg.
I turned the cut lines on 26% opacity, very thin and faint on the jpg.
Converted the jpg to CMYK. It can essentially be uploaded as is if all looks good to you.
This is basically the file I will be getting a test print of when I upload for myself.
I will leave a link to the last version in case anyone still wants that... NEW link for jpg should be up soon, psd will be later tonight.
enjoy!
K
jpg is up:
https://drive.google.com/file/d/0B_sNvgA37t6qWHFZQ2tod3liN2M/edit?usp=sharing
Anyway, I would get a credit for every time you use their service. I accepted, and they are working on the site (along with their own as they said they are doing an update as well)
This won't change anything other than the way you would get to the FOD web-site. I will still have the files posted here and you can still print them anywhere you like... I just ask that if you decide to use FOD, please use the link I will provide soon. I realize it might be several days before they get it together, so if you are in a hurry to print, go for it.... this is just something I thought I would mention for future ref.... Stay tuned.
ANYWAY....
This morning I am preparing a revised .psd (still RGB) and a .jpg in CMYK with the cut lines on (VERY faintly) in hopes this might help some of you without photoshop.
It is still the std. 27" from mid face to belt bottom. Please resize as you see fit.
Some of the changes are:
I fixed a tiny web detail on the left neck on both psd and jpg.
I turned the muscle shading OFF on the psd and adjusted the colors accordingly on both psd and jpg.
I turned the cut lines on 26% opacity, very thin and faint on the jpg.
Converted the jpg to CMYK. It can essentially be uploaded as is if all looks good to you.
This is basically the file I will be getting a test print of when I upload for myself.
I will leave a link to the last version in case anyone still wants that... NEW link for jpg should be up soon, psd will be later tonight.
enjoy!
K
jpg is up:
https://drive.google.com/file/d/0B_sNvgA37t6qWHFZQ2tod3liN2M/edit?usp=sharing
Last edited:
Mystery
Sr Member
I'd go with a greyish black to be honest, that might be more accurate, it just seems hard to get that exact look with puff paint though, it's very tricky to apply it like how they screened it, it's very uneven in areas
Aron Wohlfart
Sr Member
Yea. I sawa suit from el fett which was probably done witj metallic blue. It looks awesome.
Not sure if the metallic black would steal too much color and would let the suit look more black than blue.
I willjust try it
Sent from my iPhone using Tapatalk
Mystery
Sr Member
Yea. I sawa suit from el fett which was probably done witj metallic blue. It looks awesome.
Not sure if the metallic black would steal too much color and would let the suit look more black than blue.
I willjust try it
Sent from my iPhone using Tapatalk
Alright go for it bro, I get what you mean
interested to see the outcome
dungparker
Well-Known Member
I think we should print the blue arena should be more light and then use black puffpaint, after that trial to paint one more coat of arcylic gloss paint so the fabric would be shine like in the movie
- - - Updated - - -
And i think we should not remove the muscle shade, we should set muscle shade to low, in the trailer you can still see the muscle shade appear
- - - Updated - - -
And i think we should not remove the muscle shade, we should set muscle shade to low, in the trailer you can still see the muscle shade appear
kenlandrum
Sr Member
NEW psd and jpg uploaded.
supernova
Member
Aron Wohlfart
Sr Member
supernova
Member
Last edited:
Aron Wohlfart
Sr Member
I ordered a few to test
Slick navy blue
Metallic blue
Metallic black
I will see what i like most.
Sent from my iPhone using Tapatalk
Aron Wohlfart
Sr Member
I will put them all together on white fabric and see which i like most
Or i will try them on my test suit
Sent from my iPhone using Tapatalk
Aron Wohlfart
Sr Member
Tulip. Its the only i found and probably the best to use
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
