Too Much Garlic
Master Member
Gettyimages unsorted
T1 and T2 Endoskeleton Research Thread
- Thread starter Too Much Garlic
- Start date
Too Much Garlic
Master Member
Man, wish I had seen this and it was within my price range:
www.worthpoint.com
Terminator Spine Section | #1473072528
This is an upper spine section from one of the planet hollywood Terminators. Around 80 of these full size Terminators were made by Stan Winston studios for planet hollywood. The business has failed an
www.worthpoint.com
killuminati89
Active Member
Oh, that part is nothing.... there's definitely something more interesting in the budget, I was recently looking for an autograph from Stan Winston but unfortunately I couldn't find anythingMan, wish I had seen this and it was within my price range:
Terminator Spine Section | #1473072528
This is an upper spine section from one of the planet hollywood Terminators. Around 80 of these full size Terminators were made by Stan Winston studios for planet hollywood. The business has failed an
Too Much Garlic
Master Member
What do you mean it is a nothing part? It is currently a missing part in any licensed and fan made offering, save perhaps for the ultra rare ICONS endoskeleton.
killuminati89
Active Member
Sorry about that, I thought that would motivate you a bit. there might be something in the propstore or liveauctioneers. what is so special about the icons endoskeleton, I didn't know it was so rare?
Too Much Garlic
Master Member
Motivate me? I don't get it...
The auctions sites are usually too expensive for me, but things sold on eBay are often much cheaper, even if original.
The ICONS endo is special because it seems to have an accurate, complete SWS style spine. Maybe even the neck too. I would love to get castings or 3D scans off those.
The auctions sites are usually too expensive for me, but things sold on eBay are often much cheaper, even if original.
The ICONS endo is special because it seems to have an accurate, complete SWS style spine. Maybe even the neck too. I would love to get castings or 3D scans off those.
killuminati89
Active Member
OK, the spine is like from SWS, I noticed it and the remaining parts are from LFS, Icons or are there other manufacturers? Are they resculpts? where do the parts come from? I not quite understand that
Too Much Garlic
Master Member
Well, to me it seems the ICONS are either from the same molds or copies of the T2:3D storefront display endoskeletons - not the ones used in the ride video itself. Many things match. The LFS seems to be from that same source lineage - either from those molds, or copies of parts off those or maybe damaged unused parts, which explain why the LFS v1 spine is so messed up and parts missing.
Too Much Garlic
Master Member
Everything from Sideshow links back to that same lineage. And it makes sense, as I think Lucas Francis worked on all of them.
Too Much Garlic
Master Member
I may not have the facts right, though.
killuminati89
Active Member
Thanks for the information, I'll remember that when I build an endo for myself. At the moment I'm being held back by the 3d skull because the lower jaw isn't quite accurate. The size isn't quite right because I only have the unprocessed fragment from Ghostman, which I'm not entirely sure about because HCG also did a somewhat inaccurate job. That's why I need a couple of orthographic picturesof some models of the front, some of the side, and the whole side view of different models. Perhaps you have a couple of pictures for me from different models ?
killuminati89
Active Member
I read that the 1/3 Terminator cinemaquette comes from 3D scans of 1/1 screenused, does anyone have any information about this?
Is the hcg 1/2 from 3D Scanned 1/1 screenused models? they write on the card that it is screenused…
Is the autograph on the certificate real or printed from Stan Winston?
Is the hcg 1/2 from 3D Scanned 1/1 screenused models? they write on the card that it is screenused…
Is the autograph on the certificate real or printed from Stan Winston?
Attachments
Too Much Garlic
Master Member
The Cinemaquette has T2:3D endo vibes to it, with alterations, but definitely scanned from something SWS original. The shapes are too perfect not to be. Just a shame they did that poor work on the pose and altered parts like the neck and spine.
HCG scaled just looks like a scan of the full scale HCG.
HCG scaled just looks like a scan of the full scale HCG.
ghostman
Well-Known Member
The 1/3 Terminator cinemaquette is currently undergoing photogrammetry.
The cylinder has been removed.
Dot painting is difficult and takes a lot of time.
The photo shows the grey paint before painting the dots.
It is not possible to do photogrammetry very well with the grey paint.
I am in the process of dot painting with a Hansa airbrush.
The cylinder has been removed.
Dot painting is difficult and takes a lot of time.
The photo shows the grey paint before painting the dots.
It is not possible to do photogrammetry very well with the grey paint.
I am in the process of dot painting with a Hansa airbrush.
killuminati89
Active Member
Too Much Garlic
Master Member
Ghostman, you are a brave man. Wish you luck.
Killuminati89: it has the same look as the full scale HCG. It doesn't look like anything screenused.
Killuminati89: it has the same look as the full scale HCG. It doesn't look like anything screenused.
Too Much Garlic
Master Member
What's the best and easiest way to apply the dot-spatter pattern?
Too Much Garlic
Master Member
Well, found a place in my city that sold UV protection glasses and a small UV light, so now I have all the things I need to start finally fixing my LFS skull.
