I am blowing out what I have left of these parts.
They are made with double sided molds so they are exact copies of the kit parts.
I cast them under pressure so they are mostly bubble free but may have some minor bubbles.
The parts you see in my pictures have already had pour holes, vent sprues, and flash removed. You will have to do this work on the parts you receive.
I used mold release but paint sticks good. It sticks even better if you clean the parts before painting.
I have listed prices for sets based on kit or individual parts. Please ask if there is any confusion.
Buyer pays shipping. I ship Priority Mail in the US. If you are outside of the US send me your shipping address and I will get you a shipping quote.
1/96 Aurora Sealab
$25 - whole set*
$5 each - crane*
$2 each - any other single part **
*note: the cranes will need special attention. They are delicate to clean up and the only ones I have left have bubbles that will need to be repaired.
**note: prices are per kit part. There are two parts attached to the same sprue, they are $2 each
1/9 Esci/Italeri Kettenkrad
$20 - whole set
$5 each - red dot
$1 each - any other single part
1/15 Bandai Hummel
$10 - whole set (minus green dot parts)
$3 each - red dot parts
$1 - any other part
if you want the green dot parts pm me
1/15 Bandai German Tank IV
$3 for both
$2 each part
1/24 Airfix BF109
$10 - whole set
$2 each - red dot parts
$1 any other single part
1/24 Airfix Hurricane
$22 - whole set
$3 each - red dot
$2 each - blue dot
$1 each - any other single part
1/24 Airfix Harrier
$5 - the whole set
$3 - matched set of red dot parts
$1 for single "binocular" part
Nichimo I-19
$1 each
Note: my master had a melty spot so the casting do too
1/48 Tamiya Lancaster
$1
Various kit parts
1/35 Nichimo JagDTiger - $5 for the set, $1 each (top left)
1/76 Fujimi JagdPanther - $1 each (top right)
1/12 - Tamiya M23 - $1 each (bottom left)
1/24 Airfix Mustang - $2 (bottom right)
They are made with double sided molds so they are exact copies of the kit parts.
I cast them under pressure so they are mostly bubble free but may have some minor bubbles.
The parts you see in my pictures have already had pour holes, vent sprues, and flash removed. You will have to do this work on the parts you receive.
I used mold release but paint sticks good. It sticks even better if you clean the parts before painting.
I have listed prices for sets based on kit or individual parts. Please ask if there is any confusion.
Buyer pays shipping. I ship Priority Mail in the US. If you are outside of the US send me your shipping address and I will get you a shipping quote.
1/96 Aurora Sealab
$25 - whole set*
$5 each - crane*
$2 each - any other single part **
*note: the cranes will need special attention. They are delicate to clean up and the only ones I have left have bubbles that will need to be repaired.
**note: prices are per kit part. There are two parts attached to the same sprue, they are $2 each
1/9 Esci/Italeri Kettenkrad
$20 - whole set
$5 each - red dot
$1 each - any other single part
1/15 Bandai Hummel
$10 - whole set (minus green dot parts)
$3 each - red dot parts
$1 - any other part
if you want the green dot parts pm me
1/15 Bandai German Tank IV
$3 for both
$2 each part
1/24 Airfix BF109
$10 - whole set
$2 each - red dot parts
$1 any other single part
1/24 Airfix Hurricane
$22 - whole set
$3 each - red dot
$2 each - blue dot
$1 each - any other single part
1/24 Airfix Harrier
$5 - the whole set
$3 - matched set of red dot parts
$1 for single "binocular" part
Nichimo I-19
$1 each
Note: my master had a melty spot so the casting do too
1/48 Tamiya Lancaster
$1
Various kit parts
1/35 Nichimo JagDTiger - $5 for the set, $1 each (top left)
1/76 Fujimi JagdPanther - $1 each (top right)
1/12 - Tamiya M23 - $1 each (bottom left)
1/24 Airfix Mustang - $2 (bottom right)
Last edited: