Studio Scale A wing, finished at last!
- Thread starter Guy Cowen
- Start date
- Status
Re: ID help Probe Droid
The top one is half of an air cleaner part that goes under the rear hull of a sherman tank. I don't know which kit it would be though.
At least it has all the visual cues of one...
The top one is half of an air cleaner part that goes under the rear hull of a sherman tank. I don't know which kit it would be though.
At least it has all the visual cues of one...
Re: ID help Studio Scale Probe Droid / A wing
Tamiya Lang rings a bell Guy, but i dont think its 100%, hmm id say German armor for sure, but, ive been wrong before lol.
Confirmed kills on this prop.
Tamiya 312t Ferrari
Tamiya M16
Tamiya 88mm
Tamiya Churchill
Hasegawa Morser Karl
Tamiya Gepard
Im pretty sure there are some Leopold parts on the underside and 8rad in the rear bulkhead too.
bests.......lee
Tamiya Lang rings a bell Guy, but i dont think its 100%, hmm id say German armor for sure, but, ive been wrong before lol.
Confirmed kills on this prop.
Tamiya 312t Ferrari
Tamiya M16
Tamiya 88mm
Tamiya Churchill
Hasegawa Morser Karl
Tamiya Gepard
Im pretty sure there are some Leopold parts on the underside and 8rad in the rear bulkhead too.
bests.......lee
Re: ID help Studio Scale Probe Droid / A wing
Add the Roco Gepard to the Probey list too.
http://www.roco.com/products/Roco/67763.aspx
Add the Roco Gepard to the Probey list too.
http://www.roco.com/products/Roco/67763.aspx
MonsieurTox
Master Member
Re: ID help Studio Scale Probe Droid / A wing
Funny you post this pic Jason ! I was looking at the part we're missing on the rear of the TESB AT-ST leg and now that I see this pic, it looks like the part could be from the truck on which is the Gepard ? With the detail sanding down... Or similar part (or maybe the back of the part, I dunno !
). What do you think about that ?
Funny you post this pic Jason ! I was looking at the part we're missing on the rear of the TESB AT-ST leg and now that I see this pic, it looks like the part could be from the truck on which is the Gepard ? With the detail sanding down... Or similar part (or maybe the back of the part, I dunno !
). What do you think about that ?Re: ID help Studio Scale Probe Droid / A wing
Cheers Lee. Jason, I hope you managed to avoid earthquakes whilst you were out in Japan, I had 2 of the buggers this years. I usually find getting extremely drunk helps the old jet lag, and is good fun at the same time?
Cheers Lee. Jason, I hope you managed to avoid earthquakes whilst you were out in Japan, I had 2 of the buggers this years. I usually find getting extremely drunk helps the old jet lag, and is good fun at the same time?
Last edited:
Re: ID help Studio Scale Probe Droid / A wing
Not a chance buddy, your in now hehe. Hope the heads clearing up now J, and your getting your lefts and rights sorted lol.
Julien, i see what you mean, interesting point buddy, could well be a form of loco chassis rail?
lee
LOL.. I'm gonna chalk this up to severe jetlag, and slowly back out of the room
Not a chance buddy, your in now hehe. Hope the heads clearing up now J, and your getting your lefts and rights sorted lol.
Julien, i see what you mean, interesting point buddy, could well be a form of loco chassis rail?
lee
3d-builder
Sr Member
Re: ID help Studio Scale Probe Droid / A wing
Guy here are a two parts off the Morser
Bottom hull part.
This is a part Alan and I found it's the bottom
ramp on the lower hull. Ask Lee about the kit
all I know is it's from a city delivery truck!!:lol
It's used on the slave I think as well? I remember
seeing the part when those guys were hunting down stuff,
so I asked Alan to check it for me....sure enough!:thumbsup
Guy here are a two parts off the Morser
Bottom hull part.
This is a part Alan and I found it's the bottom
ramp on the lower hull. Ask Lee about the kit
all I know is it's from a city delivery truck!!:lol
It's used on the slave I think as well? I remember
seeing the part when those guys were hunting down stuff,
so I asked Alan to check it for me....sure enough!:thumbsup
Re: ID help Studio Scale Probe Droid / A wing
Its a C600 Michael :lol and yep, that was one killer find. Ive got a couple, that will NEVER see the panel sidings used, so i told Guy when he comes over to snap one off me, ya'll know i suck at mailing :lol
Ive made a few nice (only little) finds in the cockpit too Michael, so ill try photoshop those for you guys and shoot them over for when you guys get back to these monsters!
lee
Its a C600 Michael :lol and yep, that was one killer find. Ive got a couple, that will NEVER see the panel sidings used, so i told Guy when he comes over to snap one off me, ya'll know i suck at mailing :lol
Ive made a few nice (only little) finds in the cockpit too Michael, so ill try photoshop those for you guys and shoot them over for when you guys get back to these monsters!
lee
Re: ID help Studio Scale Probe Droid / A wing
Forgive the crudeness of these guys, not long been in from work so thought id put a few possibles down as well as confirmed.
Hope this helps, so Guy, add the Tamiya Brabham BT46 and 88mm Gunflak to your list and ill try confirm some of the others when i get some of my kits out of mothballs lol.
lee
Forgive the crudeness of these guys, not long been in from work so thought id put a few possibles down as well as confirmed.
Hope this helps, so Guy, add the Tamiya Brabham BT46 and 88mm Gunflak to your list and ill try confirm some of the others when i get some of my kits out of mothballs lol.
lee
MonsieurTox
Master Member
Re: ID help Studio Scale Probe Droid / A wing
Hey Guy, here's what Ive got so far (Cesar's pics) :
Hey Guy, here's what Ive got so far (Cesar's pics) :
- Status
Similar threads
