Reply to thread

Message: <blockquote data-quote="Corellianexports" data-source="post: 5319744" data-attributes="member: 497">The last part left is the black, floor tape.I use a template, ruler and an extremely sharp x-acto knife to cut out the right size material:[ATTACH]1579641[/ATTACH]I remove the backing on the tape and slowly wrap the tape around the bottom of the tube, keeping it as straight and lined up with the bottom of the tube as possible.  It's not clear where the seam line is in the reference photos, but it doesn't appear to be anywhere near the switches or the right side of the tube.And it's done:[ATTACH]1579642[/ATTACH]  [ATTACH]1579643[/ATTACH]Movie:[ATTACH=full]1579644[/ATTACH]</blockquote>

Your message may be considered spam for the following reasons:

Your new thread title is very short, and likely is unhelpful.
Your reply is very short and likely does not add anything to the thread.
Your reply is very long and likely does not add anything to the thread.
It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
Your message is mostly quotes or spoilers.
Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
This thread is locked.