Update 12/10: I've reached out to all those remaining on the list and haven't gotten much response. If you're interested in getting on board now is the time!
Update 9/24: Interest sits around 100 at the moment, and I'm not sure I can even get through that many.
Consider this your one-stop-shop for all things Star-Lord!
I am gauging interest on a few items every Star-Lord/Peter Quill needs:
- belt buckle (cold cast aluminum)
- rocket controls (cold cast aluminum)
- short jacket "glyph" patch (urethane rubber)
- blaster holster clips
I will most likely do all of the above for myself, so I figured I would check to see what interest was like for everyone else.
I partnered with @sauer33 for all of the 3D models (fantastic, amazingly quick modeler!) and worked out the details for molding and casting to offer to you fine folks!
The buckle:
This is the early prototype--I am having this printed on a Form1 resin printer for much better resolution and finish. I will clean it up and master before molding, then cold cast in aluminum with Onyx resin. Should give a perfect finish with minimal effort. The model has slots for a belt to pass through, but I think I will make it just the facade and embed metal hardware in the resin for attaching to your belt.
Thigh Rocket Controls:
This will also be printed on the Form1 and mastered. Cold cast aluminum with Onyx as well
"Glyph" Arm Patch:
Once cleaned up, this will be molded and cast in a semi-flexible urethane rubber which can then be easily sewn or glued to your jacket.
Holster Clips:
My initial design wasn't strong enough and failed pretty significantly, so these will not be offered.
Buckle - $35
Rocket Controls (pair) - $20
Arm Patch - $20
All bundled together, $75 + shipping
Domestic shipping is $10, international is $15
The List:
Update 9/24: Interest sits around 100 at the moment, and I'm not sure I can even get through that many.
Consider this your one-stop-shop for all things Star-Lord!
I am gauging interest on a few items every Star-Lord/Peter Quill needs:
- belt buckle (cold cast aluminum)
- rocket controls (cold cast aluminum)
- short jacket "glyph" patch (urethane rubber)
- blaster holster clips
I will most likely do all of the above for myself, so I figured I would check to see what interest was like for everyone else.
I partnered with @sauer33 for all of the 3D models (fantastic, amazingly quick modeler!) and worked out the details for molding and casting to offer to you fine folks!
The buckle:
This is the early prototype--I am having this printed on a Form1 resin printer for much better resolution and finish. I will clean it up and master before molding, then cold cast in aluminum with Onyx resin. Should give a perfect finish with minimal effort. The model has slots for a belt to pass through, but I think I will make it just the facade and embed metal hardware in the resin for attaching to your belt.
Thigh Rocket Controls:
This will also be printed on the Form1 and mastered. Cold cast aluminum with Onyx as well
"Glyph" Arm Patch:
Once cleaned up, this will be molded and cast in a semi-flexible urethane rubber which can then be easily sewn or glued to your jacket.
Holster Clips:
My initial design wasn't strong enough and failed pretty significantly, so these will not be offered.
Buckle - $35
Rocket Controls (pair) - $20
Arm Patch - $20
All bundled together, $75 + shipping
Domestic shipping is $10, international is $15
The List:
1. | Rikarus |
2. | Tommychamp |
3. | TheRocketeer |
4. | Reserved |
5. | MorbidCharlie |
6. | Spatch |
7. | crueshophorrors |
8. | hikz |
9. | Humanoid |
10. | Berserk |
11. | hutch1 |
12. | Reserved |
13. | SeattleMaddog |
14. | spiderfan11 |
15. | AlphaEarth |
16. | CheriBot |
17. | Mparm |
18. | acraig2031 |
19. | treblelens |
20. | mikid |
21. | tinystarlord |
22. | Magnus Darcrider |
23. | CapKaos |
24. | star bored |
25. | niennumb1 |
26. | made007 |
27. | Jetfire852 |
28. | dannylopuz |
29. | Sushigod |
30. | KSR |
31. | Lamia |
32. | Ahemmestad |
33. | Yrien |
34. | d4ng |
35. | DLTSchiller |
36. | NACZ3 |
37. | ErkNinja |
38. | Onyx |
39. | Blizz |
40. | starlordquill |
41. | capcicle86 |
42. | montified88 |
43. | Soulinteria |
44. | Jediguy |
45. | grudgehammer |
46. | RedJen |
47. | SantinoCasas |
48. | Cameron |
49. | Carmichaelcarr |
50. | blakejolly |
51. | Capn_Jack_Savvy |
52. | Jackal |
53. | Jango Wes |
54. | agirlcalledbob |
55. | Arael69 |
56. | SHADOW7000 |
57. | M Constantine |
58. | James Rodarte |
59. | nprimex1 |
60. | BlackLabel |
61. | Jodo |
62. | Rick Webb |
63. | katmurz |
64. | Staar Lord Maan |
65. | Undeadpool |
66. | ZachAbati |
67. | Theboywonder |
68. | daniellesugar |
69. | Loophole |
70. | Spidey83 |
71. | RemyLebeau |
72. | Nagano |
73. | dstengler |
74. | mattmartin1 |
75. | mummycop |
76. | doctormckay |
77. | Saber Concepts |
78. | bh1138 |
79. | JBHero |
80. | hazardjsimpson |
81. | Mr Stark |
82. | kane |
83. | athelu |
84. | Jtrinidad |
85. | rianimare |
86. | Darth Gius |
87. | MouseKid |
88. | Evil Benius |
89. | BUBBENSTEIN |
90. | RedArc |
91. | .:MirrorMinD:. |
92. | E-Wan |
93. | aeonpulse |
94. | Darth Mule |
95. | beardo |
96. | Parksdesign |
97. | Luckyslev |
98. | WestBertozzi |
99. | TCK123 |
100 | . mhoepner |
Attachments
Last edited: