Spiderman web shooter: A collaborative project.

[pRoJectEarth7]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

If the flexible pressure switches in the JY become a reality, everything will be so much easier.

Yeah, I think so too... but I guess most chosen the hard way :confused

 

[AlexGordon]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

It would appear so. I guess i'll be printing the image on cardstock, laminating it, and running wires underneath to two tactile switches. Not as elegant as the FPC but it will work i guess.

Here is my wiring diagram. Unfortunately i don't have anything other than pencil with me, so it isn't color coded. A few notes for those who don't have much (or any) experience with this stuff. Switches have no polarity, and there is no specific place to put them. If you put them in the middle of a circuit anywhere, they will control everything connected. Also, resistors don't have to be on the positive side of an led, and you will have to use a resistor if you have a 3v battery and a red led.



So to give a quick rundown of this circuit, without the web cartridge in place, nothing will function while pushing the buttons or not. With the web cartridge in place, the green led(s) come on and the blue and red leds (nozzle flash and dome led) will be active when the buttons are pushed. Very simple compared to the stuff i normally work with.

Also, due to the way a reed switch functions, if you use one you will not be able to hold in the cartridge magnetically. A friction fit would probably be best. With something bigger you might have enough area to put magnets for support on the sides and magnets for detection on the front, but with this space i would definitely not depend on the weak attraction between the reed switch and the sensor magnets to hold in the cartridge.

 

[spiderteen911]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Just ordered my shooters and ect. So excited! Will post pics and once they come in! On another note, any new updates and/or pics?

 

[Mystery]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

wanted to share the bingo chips I found guys, they look a lot darker than the other ones, so ordered these ones from e-bay

and here are the shooters for comparison

You can buy those bingo chips If you already didn't have some and looking for a more darker colour, here is the link TUB OF RED CLEAR COLORED PLASTIC BINGO CHIPS-250ps | eBay

 

[NuadaDesigns]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Awaiting my 3D prints. Got started on the fluid indicators and led set-up. Let me know what ye think.

 

[Yorke]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Long time lurker here on therpf, but been wanting to put together a Spidey suit next. This thread looks awesome, and I'll be ordering some parts in the next few days. Will post pics up once I get started. Until then, I'll just continue lurking and watching y'all's awesome progress.

 

[biccino]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Count me, what is the price?

 

[spiderteen911]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Hey guys, what would be the better size to get for the bingo chips, 3/4 in or 7/8 in. Which size is bigger?

 

[epilepticsquirl]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Count me, what is the price?

...3/4 in or 7/8 in. Which size is bigger?

.75 inches is fine.

 

[Hexvas]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Hey guys, what would be the better size to get for the bingo chips, 3/4 in or 7/8 in. Which size is bigger?

I ended up getting 3/4", and there was still trimming necessary. The larger the chip, the more you'll have to trim.

7/8" is an eighth larger than 3/4". ( 3/4"=6/8")

 

[spiderteen911]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Okay sounds good! Thanks guys!

 

[MercyFlush]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Hey guys, what would be the better size to get for the bingo chips, 3/4 in or 7/8 in. Which size is bigger?

Serial?

:darnkids:darnkids

 

[dooley23]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

its funny i still havent bought mine yet.

 

[Bluenyte]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Thanks so much for making these available! I thought I'd try modeling some of the sprockets in just to see what would happen. Here's what I came up with

I don't plan on printing the red cover, but I want to see what happens if I print everything else.

 

[spiderteen911]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

^ Thats freaking awesome!! Great work!! :thumbsup

 

[epilepticsquirl]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

i used velcro but for when the shooter is attached to the velcro the strap is sown onto the band and then the band is glued to the bezel so the velcro seals the bottom onto it but the bezel also snaps onto the shooter so that it is attached in two ways,

Just found your video on YouTube, love the breakdown and explanation of everything; with your permission I'd like to add it to the first post. :thumbsup

 

[epilepticsquirl]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Thanks so much for making these available! I thought I'd try modeling some of the sprockets in just to see what would happen.

I don't plan on printing the red cover, but I want to see what happens if I print everything else.

Love the rendering, makes me want to get off my butt and finish these things!

 

[NuadaDesigns]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

Eagerly awaiting my shapeways delivery, i sculpted and cast a resin mock-up to test the magnets and dimensions. Cant wait for the finished piece.

 

[dooley23]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

I have to buy mine like really fast

 

[Davehenry]

Re: Spiderman web shooter: A collaborative project. Now with wiring diagrams!

The web shooters look great. What is everybody useing for straps?