Reply to thread

Message: <blockquote data-quote="RobbLopaka" data-source="post: 3855912" data-attributes="member: 154168">I have been making several stun guns and comlocks over the last couple of months here is an example of each. They are carved out of solid wood, these are just about ready for some paint. I have made two guns and three comlocks from wood. I'm getting ready to try 3d printing of the third gun, just to see how that goes. The nozzles were cut from a wooden dowel and shaped with a wood rasp so they were narrower at the one end. The end is currently flat, I am thinking that I will drill slightly into the end to create a little cup shape on each one, then paint the inside with the appropriate colors[ATTACH]570441[/ATTACH]</blockquote>

This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

Your new thread title is very short, and likely is unhelpful.
Your reply is very short and likely does not add anything to the thread.
Your reply is very long and likely does not add anything to the thread.
It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
Your message is mostly quotes or spoilers.
Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
This thread is locked.